Salvatore <healer (AT) NoSpamaccesshub (DOT) net> wrote:

Where do I get that?

Many thanks,

--
Sheldon Isaac
lose all .control when replying

"Shel" <sisaac.control (AT) netaccess (DOT) control.com> wrote

While ME and 98SE are close in the type of Windows, ME added support for USB
Mass Storage devices, that 98SE needed drivers for.

Therefore there is not a separate software for the mass storage driver in
ME.

Which is why the Iogear device did not supply any software. All of the
systems they supported have built in support for USB mass storage.
http://msdn.microsoft.com/library/de...128fef.xml.asp

Read the first paragraph.
--
CSM1
http://www.carlmcmillan.com
--

I have a kodak easyshare z710 camera. When i take the sd card from the
camera and put in the iogear, the computer says that the file is there,
but that it is 0 information.

When i put the sd card back into the camera, the camera says
"unrecognizable format" - but it was there and saved on the sd card
before putting it into the iogear.

If i use a regular card reader, it works fine.

Is there a glitch? I am using windows xp.


--
Brosen


Future Hardware - http://www.futurehardware.in

"Brosen" <Brosen.2ljjco (AT) nospamplease (DOT) com> wrote

Apparently there is glitch somewhere.

Format the card in the camera only.
Erase images from the card in the camera only.
Never on the computer, the computer will create a unreadable card for the
camera.

It is likely that the card was not correctly formatted before you used the
card.

If you have pictures on the card and you can view the pictures in the
camera, then copy the images using the USB connection of the camera (It
there is a USB connection). Or the Dock.

After copying the images then format the card in the camera before using the
card again.
If you can not copy the images, they are just gone, sorry for your loss.

Do you think there may be something wrong with the iogear?

Windows XP can read any valid format available. The keyword is "Valid".

CSM1
http://www.carlmcmillan.com
--

I am not sure what's going on. it works sometimes - and not others. I
can put pictures onto the reader from the computer, and the camera
reads it just fine, but going the other way - even if i format the disk
first, sometimes the file has 0 bytes. it shows the file is there, but
nothing on the disk comes over to the computer.

interesting.


--
Brosen


Future Hardware - http://www.futurehardware.in