Just tried a BIOS update to latest (030811) because I was having occasional system failures. Inital check by aminf341.exe stated the bios was...

gmnospam@nospam.xyz

10-05-2004 02:17 PM
Buffalo

My OS is WIN 98 SE on a ESC K7S5A motherboard. The computer runs fine but I just tried to add a USB 2.0 PCI card. With the card in any slot, the...

ALE

10-04-2004 08:24 AM
gmnospam@nospam.xyz

I'm currently using a ECS K5S7A Pro (latest honey bios upgrade) AMD XP 2000 T-bird (A 6-8-0) Muskin basic PC2700 memory, two 256MB sticks. I can...

Tod

10-03-2004 06:26 PM
Shep©

It says on the box it has 6 channel audio. My boad didn't come with a SPDIF. It only has mic, line-in, and line-out. ECS don't sell SPDIF. Am I...

James

10-02-2004 05:39 PM
Mike

I'm currently using a K7S5A PRO with latest Honey X bios AMD XP 2000 (1667/133, A 6-8-0) two 256MB PC2700 (Muskin basic). Will only overclock to...

Tod

09-30-2004 10:01 PM
Big_Jerk

I just got a new processor an AMD XP 2600. I tried to put it on the motherboard but when I start my computer, it doesn't find my new...

Stephan Kamstra

09-30-2004 04:02 PM
Martin

Hi all. Considering trying to raise the multiplier on the 2000 athlon xp cpu, in an effort to increase speed. Anyone try this? Are there any...

tomW

09-30-2004 12:42 AM
tomW

i forgot to ask in my last post , i believe the web site said it will support a P4 Exteme Edition(HT) @ 3.4 Gigs ( 2 meg cache, 800MHz FSB...

Pete Rynas

09-28-2004 07:01 PM
Pete Rynas

what is the fastest processor this board will run - stabaly?? the web site shows it will run a 800 FSB?? is this true?? thank you pete rynas

Pete Rynas

09-28-2004 06:40 PM
Pete Rynas

First, thanks for the feedback on the other post... it may just be the power supply. I am replacing the power supply on a budget, but... I also want...

Jess Fertudei

09-28-2004 01:41 PM
Smoker

Hello... this is not the other poster I see oddly posting a similar question on the same day. Similar, but not the same. I am still running that...

Jess Fertudei

09-26-2004 12:19 PM
Buffalo

I have some computers with a k7s5a motherboard and cpu AMD 1800+. Although wol is enabled in bios, I can not start up the pc from an other one. I...

Georges Cools

09-26-2004 11:06 AM
Kylesb

First of all , is it the same bios? I tracked it down since I see some markings on the board and the K7vmm2 is listed as a replacement board for...

John@Smith.com

09-26-2004 10:50 AM
John@Smith.com

I have a K7S5A Pro Mainboard and have been having problems with the FSB/Memory settings in the most recent version of the CheepoBIOS. I have one...

hukuis

09-25-2004 12:45 PM
Tod

Hi, I just got a new ECS 848P-A. I want to use it for my kids' computer. I have an older socket 478 1.6 GHz P4 with a 1.75V vcore. Will this older...

221FB

09-24-2004 09:37 PM
221FB

Hi, My Godchild's computer started to smoke. She sent it to me. I got the PC to start and noticed that indeed the MOBO was frying just to the USB...

Doubles

09-22-2004 12:59 PM
Doubles

Can anyone help me here. I want to run the cpu at overclock mode and at top mhz. When I set this in bios, and reboot, it gets as far as the...

tomW

09-20-2004 09:48 PM
tomW

I suspect that my (CMOS) battery in my K7S5A is going; I've had Windows XP freeze solid roughly once a day for the last several days. The CPU...

Rhino

09-17-2004 03:09 AM
Smoker

I have a problem with the AGP on my k7s5a. In my device mangler, I don't have the AGP drivers installed, just the PCI-to-PCI bridge. So I update this...

Ross

09-16-2004 07:00 PM
Shep©

Hi, did anybody make the K7S5A pro work with wake-on-ring? I have some strange effects there: When the computer is off (software-off) and it receives...

Carsten Schnober

09-16-2004 08:24 AM
Carsten Schnober

hi guys, does anyone know how to auto power up without using the power switch connected to the mainboard? i tried using different Bios versions but...

Kelly Ray

09-15-2004 10:00 PM
Dekaritae

I'm looking for information on the cpu fan included with this motherboard. How loud is it supposed to be? Is it a reliable fan or should I...

tomW

09-15-2004 10:06 AM
Buffalo

This is very strange. I'm working on a friend's computer which has an Athlon XP 1600+ running on a K7S5A. The CPU settings in the BIOS had been set...

Jeromy Van Dusen

09-12-2004 07:12 PM
Smoker

I have this board and after installing a NIC (onboard died) I found I no longer have video. I tried installing an ATI Radeon 9600 pro and I still...

Eric Johnson

09-11-2004 07:49 PM
PJx

When I turn my K7S5A based system on the XP slpash screen appears with the moving bar but after a few seconds after it checks the CD ROM's it reboots...

J B Den

09-10-2004 04:28 AM
Al

Hi all, I just bought this hardware. Has neone out there tried to overclock the above cpu with above mainboard ? If so, could u please email me how...

silverside

09-09-2004 03:43 AM
silverside

I have a new K7VTA3 MB with 333mhz FSB CPU temperature sensor is fine but the case tempurature is running crazy. My CPU, core voltages are accurate...

John

09-07-2004 09:34 AM
R. Anton Rave

i put together a simple system for my son using this "returned" fry's board that came with a boxed retail 2500+ for $59. super deal? i screwed...

tony

09-06-2004 01:41 AM
TX_Dude

Greetings! 1) What is the highest speed chip I can run on the k7s5a motherboard? 2) My motherboard manual doesn't tell me whether my k7s5a board is...

Home Mail

09-03-2004 04:03 PM
Mark T

I have been running a Duron 1.3 on my K7S5A Pro for quite a while now with no problems. Had what i believe to be the last but one version of the BIOS...

Martin

09-01-2004 01:43 PM
Kylesb

Hi! I own an ECS P4VXAD+ motherboard and the PC (either with Windows 2000 or XP) won't shut own completely. The hard drive goes in sleep mode but I...

Pierrick Brossin

08-30-2004 12:01 PM
Pierrick Brossin

Just been given a L7TVM and I can't get to boot. The Power Supply (230W), Duron 1600, and 2 different GFX (Radeon DDR VIVO & Radeon 8500LE cards)...

Luke Curtis

08-29-2004 10:41 AM
Luke Curtis

I am not able to get my Seagate 40GB 7000.7 to boot from a K7S5A Pro. First it detects the drive and says "OK" but then it says -The previous device...

Al

08-28-2004 04:09 PM
Smoker

Has anyone managed to get this sound divice to work with some variation of a 1.1Gz Athlon, Socket "A" with SIS730S chipset.

B&B Musmon

08-26-2004 08:18 AM
B&B Musmon

Can anyone tell me how I can possibly get my Logitech MX510 corded optical mouse working in Safe Mode or real DOS? I have the HoneyX BIOS ...

Buffalo

08-25-2004 02:57 PM
Shep©

Hi all: I know this is not the appropriate site for a external harddrive quetion, but there are so many knowledgeable ppl in this ng that i thought...

Jay Cee

08-24-2004 11:08 PM
James J

I am in a little bit of computer hell. I need to put a video capture device on my system for a small project I am doing. My motherboard only has 2...

B&B Musmon

08-24-2004 07:25 AM
Mr. Slow

Can't help you there?! Awhitia Peets Tel. +1 289 465 1452 Awhitia (AT) pinreg (DOT) com Awhitia (AT) zanbegir (DOT) com

Awhitia Peets

08-23-2004 09:41 AM
Jay Cee

Does anyone know of a UK retailer that has the K7S5A Pro in stock? Apart from eBay, I can't seem to find one.

Cuzman

08-21-2004 08:21 PM
Gary Lightfoot

Hello all, I have a few questions that I hope you guys can help me with. I didn't get a reply from ECS, probably because of the age of the board in...

Vu

08-21-2004 04:02 AM
Vu

The following post is for historical purposes only. I went through an adventure getting sound to work on my P6STP-FN. During the adventure, I found...

Pete Landers

08-20-2004 02:14 PM
Pete Landers

I've got an ECS P6STP-FN board, which uses the SiS630 chipset and a SiS 301 video out chip. I've been playing around with making a multimedia center...

Pete Landers

08-20-2004 01:51 PM
Pete Landers

Does anyone know where I can find the latest, or last good bios for this board? Thanks for your help in advance. JS

John Smith

08-18-2004 09:49 PM
John Smith

I have a K7VTA3 Rev. 8.0 board, AMD XP 2400, 256 meg DDR, Radon 9200SE video card. I dual boot 98SE and Windows XP on seperate hard drives. I use...

Dennis

08-18-2004 09:02 AM
Buffalo

I'm trying to piece together some donated hardware and make a usable Win 95 system based on the P5SJ-B motherboard. I've tried 3 or 4 PCI video...

SV

08-17-2004 04:38 PM
SV

Hi, I have the K7S5A v.3 Mobo. I have a Maxtor 40 Gig. HD. 384 MB. RAM. When I installed XP Professional, I only got 30 Gig. How do I get...

jm

08-15-2004 12:28 AM
Buffalo

I apologize for such a newbie-ish question, but... I'm trying to figure out if my ECS K7VTA3 (v3.1a) motherboard could support an Athlon XP 2400...

Opticreep

08-14-2004 11:13 AM
kirbalo

I have a 661FX-M with a 3.2G Prescott. The system is only runnig at 2.8G (14x200Mhz). I have treid the latest BIOS for the board and still have the...

Dan

08-14-2004 08:13 AM
Paul

Don't cross-post and I won't top-post. Angelus wrote:

neopolaris

08-13-2004 01:08 PM
neopolaris

Hello! I've just set up a new board but can't get a video signal. Tried severeal graphics cards already! Anyone has a clue??? Thank you very much!

Motta Guedes

08-11-2004 11:58 AM
Buffalo