| | Rating Thread /
Thread Starter | Last Post  | Replies | Views |
 |  | Looking for the most stable bios for this board, ok if its a modified, just
looking for something that has no trouble with DDR memory at FSB...
Mark
|
08-07-2004 04:08 PM
Buffalo  | 1 | 43 |
 | | Opened up my Linux box containing a 2-year old K7S5A today to fit a SCSI
card and noticed some swollen caps:
C425 (bottom of AGP slot - AGP...
Mike Tomlinson
|
08-06-2004 10:34 PM
TX_Dude | 26 | 106 |
| | | hello
Does someone can control fan speed with speedfan on K7S5A?
with speedfan 4.13 no success?
--
http://www.pascaland.org/ compilateurs, sources et...
Franck Pissotte
|
08-06-2004 08:59 AM
PJx | 1 | 49 |
| | | Bernie,
Try taking one stick of the memory out. This board is sometimes
finicky on what type of memory it will take (SDRAM). If you can buy
DDR ram,...
WROSIE
|
08-05-2004 09:08 PM
WROSIE | 0 | 47 |
| | | I have a new MB with AMDXP 2800 CPU. I have a good 512Meg DDR
module,unbuffered, 64x64 PC2700 CL2.5
Every time I try to install it by itself in...
John
|
08-05-2004 02:58 PM
Dekaritae | 1 | 41 |
| | | Trying to bring up a new ECS848P-A mb and new radeon 9200 video card.
Radeon card works fine on an older mb and an older video card works
fine on...
krl
|
08-05-2004 01:08 AM
cYon | 1 | 43 |
| | | Hi All!
I need some help with my newly installed ecs 848p-a board. I
installed a 3.0 ghz HT chip and a gefore fx5700ultra, I also placed
512 pc3200...
countchoculanyc
|
08-05-2004 12:11 AM
countchoculanyc | 0 | 49 |
| | | I have an ecs k7s5a rev 1.0 that has a similiar problem. After I switched to
DDR PC 2700 RAM (Crucial, 2 DIMMS 256 MB each). I get a video signal...
Mark
|
08-04-2004 11:23 PM
CJT | 1 | 44 |
| | | I'm trying out a K7SOM+ 1400+ motherboard and cpu, running it on XP
Pro.
Everything is working fine except for the video settings. The drivers
that...
Doug@Nomail.com
|
08-04-2004 04:07 PM
Doug@Nomail.com | 0 | 49 |
| | | I bought a L7S7A2 Motherboard and an AMD 2700+ XP
http://www.ecsusa.com/products/l7s7a2.html. I updated the Bios to the latest
rev from ECS's...
Knot@Work
|
08-04-2004 12:20 PM
TX_Dude | 6 | 40 |
| | | I have a k7sem. Put it in and it runs okay for a little while . Then
it frezzyies up on me. Any body has any ideas whats going on
rsteelhead
|
08-03-2004 07:30 PM
Brian Campbell | 1 | 53 |
| | | Hallo XP-Nutzer,
Ihr kennt das sicher: wer sich etwas intensiver mit PCs beschäftigt, wird
automatisch zur Hotline und zum Administrator im...
Andreas Scheer
|
08-03-2004 11:22 AM
Andreas Scheer | 0 | 55 |
| | | i really need to kno how to get rid of the ms dos subsystem... and hey
this is just like gaiaonline too
==============
Posted through...
eve
|
08-03-2004 10:32 AM
Larry Scholnick | 3 | 35 |
| | | Just had a bad encounter with a K7S5A and was hoping for some advice.
Assembled PC only to find that on booting to CMOS one of the MOSFETS
was...
Destry Jones
|
08-02-2004 03:44 PM
PJx | 2 | 40 |
| | | I have an ECS k7s5a 1.0 board with ami bios 07.00t dated 4/2/01 . The system
locks up after about 1/2 hour from boot when running at CPU/Memory speed...
Mark
|
08-02-2004 01:39 AM
alpha_uma | 2 | 50 |
| | | I have the N2U400-A ECS mobo with an Athlon XP 2600+ cpu (I got that
$74.99 deal at Fry's) and it works great, but theres one problem that
erks me: I...
Michael Angel
|
08-01-2004 07:18 PM
Michael Angel | 0 | 56 |
| | | Hi,
i've installed a new HD (Excelstore 80 G, ATA 100) on a K7S5A (3.1) board
and now my cpu (Athlon 1800+) is to hot. (60 Grad Celsius) I had only...
Helmut Haeussler
|
08-01-2004 06:33 PM
Ralph D. | 8 | 56 |
| | | K7VTA3 Version 6
I have an AMD XP2800 installed in the board.
It should work but unable to get up to speed with it.
I can get all other speeds using...
John
|
08-01-2004 08:36 AM
John | 2 | 42 |
| | | Hello!!!
My PC won't start. I thought it was a power problem and replaced the power
supply. Same problem. Could it be the switch? Or could the board...
Motta Guedes
|
08-01-2004 03:57 AM
alpha_uma | 1 | 37 |
| | | "fLameDogg" <flamedogg (AT) operamail (DOT) com> wrote
the Lost CMOS problem. AFAIK, there is no known permanent fix for it. ECS
has totally...
Drvnguy
|
07-30-2004 02:17 PM
Smoker | 4 | 44 |
| | | I have been seaching around for a good motherboard and came down to 2
boards. How about the ECS "755-A2 V1.0? I am going to build a system for...
Billy
|
07-30-2004 10:25 AM
PJx | 3 | 41 |
| | | I'm trying to disable the onbaord graphics to install anAGP graphics
card. I've tried the bios numerous times and cant find the option to
disble the...
ShadowFax
|
07-30-2004 07:08 AM
ShadowFax | 2 | 46 |
| | | I just purchased an L7S7A2 Mobo with the AMD XP2700+ CPU...The maximun
multiplier jumper setting on this board is 12.5 (going by the manual)
this...
cagliostro
|
07-29-2004 03:55 PM
TX_Dude | 1 | 46 |
| | | Hi all,
I got a new xp 2600+ chip for my K7S5A mobo. First up I did a bios upgrade
to 02/08/09 from...
Home Mail
|
07-29-2004 01:11 PM
PJx | 4 | 37 |
| | | I have a KT600-A with an AMD2500XP, Seagate 80GB (ST380021A) IDE and Western
Digital 160GB as Primary master/slave with Windows 2000 and all...
khobar
|
07-29-2004 01:02 PM
khobar | 0 | 45 |
| | | I've been running my K7S5A with 256MB (2 X 128) SDRAM for several months
now. I recently ran across a system with a K7VMA in it, and I think...
fLameDogg
|
07-27-2004 11:22 PM
Dekaritae | 16 | 86 |
| | | I just purchased this motherboard and put in a 2gig celeron processor.
I purchased two 128MB PC2100 266Mhz DDR RAM chips (they are also
PC1600...
My Name
|
07-25-2004 11:49 PM
My Name | 5 | 54 |
| | | I can play DVD's fine with PowerDVD. I can play original
audio CDs fine with Windows CD player. But when I put in a
CD I've recorded, the drive...
gmnospam@nospam.xyz
|
07-25-2004 10:33 PM
gmnospam@nospam.xyz | 0 | 44 |
| | | I picked up a 550w power supply for my computer, but there is no rating
on the PSU for individual rail wattage, only combined. I was wondering
if I'm...
Dekaritae
|
07-25-2004 05:04 PM
Dekaritae | 4 | 56 |
| | | When first turning on my L4VXA2 main board, nothing happens--all the fans
run, but the monitor stays asleep and nothing else happens. Once I...
Robert Ginn
|
07-25-2004 12:31 PM
Robert Ginn | 0 | 51 |
| | | Does anyone know what is the "FIDJP1" for?
It shows to set "ratios" for something but what?
Thanks
Xeno Chauvin
|
07-25-2004 12:41 AM
TX_Dude | 4 | 52 |
| | | if i have a 2500XP(333FSB) and winXP reports it as 1.83 gig that doesnt seem
correct?? i have the jumper on the board set to AUTO and the BIOS set...
Pete Rynas
|
07-24-2004 11:06 PM
Pete Rynas | 1 | 46 |
| | | when i try to set the cpu ratio w/ jumper FIDJP1 to anything except short
#1-#2 , board will not boot?? what is the correct settins for...
Pete Rynas
|
07-24-2004 11:05 PM
Pete Rynas | 1 | 50 |
| | | BAD BIOS CHIP FLASH?
VISIT:
http://bioschips.afraid.org
For Replacement chips $15
re-flash of existing chip $8
iCE Flashing iNC
|
07-23-2004 03:11 PM
iCE Flashing iNC | 0 | 42 |
| | | Current system is a K7S5a Pro 5.x with official 021209 BIOS (previously
030121). Athlon 1500+ (133/133), 2x128mb PC133 SDRAM, GF2MX video, 400W
power...
Dekaritae
|
07-22-2004 09:33 PM
Dekaritae | 6 | 44 |
| | | Anyone know what the highest cpu is which this board will take?
Currently running 333fsb xp2600 with
no problems. TIA, Ray
Ray Freed
|
07-21-2004 03:37 PM
Ray Freed | 0 | 48 |
| | | My other ECS boards have been K7S5As which needed RAM and Processor
speed to be set in the BIOS.
Does the 848P-A require any BIOS changes - or does...
Les Caudle
|
07-21-2004 07:51 AM
Les Caudle | 0 | 51 |
| | | I'm trying to use a Creative VIBRA 128 (CT4810) soundboard, but no
way.
Using Crystal (Crystal SoundFusion) or Creative drivers, it isn't
possible to...
Clark Thomas
|
07-20-2004 03:58 PM
Clark Thomas | 1 | 37 |
| | | WinXP installed on a new 80Gb drive on new L4VXA2 v1.1c (Award BIOS 6.00g)
constantly freezes within a few minutes. Win98 (on the old drive) runs...
Robert Ginn
|
07-20-2004 03:06 PM
Robert Ginn | 3 | 40 |
| | | Ralph D. wrote:
Keep checking CompUSA and OfficeMax ads every week ... you can get 'competitive'
upgrade to PM8 at a pretty reasonable cost. I'm...
RonS
|
07-20-2004 01:31 PM
RonS | 0 | 40 |
| | | ....tool that will allow me to modify mobo BIOS.
I was trying ModBin 2.4x, then ModBin6 1.0.xx and lastly ModBin6 2.0 beta.
I had best results with...
szpon
|
07-20-2004 06:59 AM
szpon | 0 | 51 |
| | | Hallo NG!
Have XP installed and want to install Linux also. Formerly with older
boards (Asus) a boot limit of 8 GB needed to be obeyed. Is that...
Helge Haensel
|
07-19-2004 06:23 AM
Helge Haensel | 0 | 45 |
| | | 1. Is it possible to mix PC2700 and PC3200 on an ECS 848P-A
motherboard?
2. Does this just run at the lowest speed?
3. I see on the crucial site...
Les Caudle
|
07-17-2004 03:54 PM
Brian Campbell | 1 | 37 |
| | | Sorry, if this seems like a dumb post, but before reading this NG, I didn't
even know that upgrading the bios would allow you to use a faster...
Bones
|
07-16-2004 01:09 PM
Bones | 6 | 49 |
| | | Helped a friend troubleshoot problems with a winxp/k7s5a system.
Registry recovery messages were quite common on startup (but XP would
indicate the...
Kylesb
|
07-15-2004 11:06 AM
Kylesb | 10 | 62 |
| | | I am wondering what this board will support ,cpu type ,i am now on xp 2000
and wondering if its worth maxing out cpu speed with other chip or...
Drvnguy
|
07-14-2004 08:07 PM
kirbalo | 3 | 52 |
| | | Problems With AGP Driver and K7S5A Pro
--------------------------------------------------------------------------------
Just installed K7S5A Pro with...
therocker
|
07-14-2004 02:08 PM
Tech Support Guy | 5 | 42 |
| | | I will be purchasing a new base PC at a weekend Computer Show this
Sunday. I've been living with 4 ECS K75SA systems for the last 3 years or so
that...
SpicaTC50
|
07-14-2004 02:07 PM
Tech Support Guy | 7 | 61 |
| | | mainboard k7s5a
my old hdd craches, the new 1 a western dig 1200bb 120gb
if i push the comp on mem check oke than i must wait 30 a 40 sec than...
Arno Gierkens
|
07-14-2004 02:02 PM
Tech Support Guy | 3 | 44 |
| | | i have k7s5a pro, want to install two hd, is there any tricks or problems i
will encounter.
thanks
joelburgon
|
07-14-2004 02:01 PM
Tech Support Guy | 3 | 47 |
