i have k7s5a pro, want to install two hd, is there any tricks or problems i will encounter. thanks

joelburgon

07-14-2004 03:01 PM
Tech Support Guy

k7s5a v. 3.1 Is there a jumper that needs changed when changing from SDRAM to DDR? I cannot get the board to run without severe file...

Jess Fertudei

07-14-2004 03:00 PM
Tech Support Guy

Was looking at the Fry's special (ECS KT600-A & AMD 2600+ for $80), and was wondering if the motherboard supported IDE RAID, or only SATA RAID. The...

Michael Bourgon

07-14-2004 03:00 PM
Tech Support Guy

Anyone has experience with having bad capacitors on their ECS P4VMM2 motherboard? After 23 months of 24-7 non-stop crunching "SETI at home", mine...

alpha_uma

07-14-2004 02:57 PM
Tech Support Guy

BY wrote: On Asrock site there is an utility to restore the MAC address lost with bios upgrade. Maybe it is useful for L7S7A2 MB too. Slang

Slang

07-14-2004 02:56 PM
Tech Support Guy

You may have to reinstall a clean copy of XP. Pj On Mon, 05 Jul 2004 19:32:58 +0100, loris <arsegirlsdrinkfeck (AT) hotmail (DOT) com> wrote:

alpha_uma

07-14-2004 02:54 PM
Tech Support Guy

I presently have a AMD XP 2200 running in my system. What is the fastest AMD XP I can plug in? I've heard that AMD make difference versions of XP...

Iggy

07-14-2004 02:51 PM
Tech Support Guy

**** Post for FREE via your newsreader at post.usenet.com **** Hello, I am currently looking for people interested in low-cost web hosting. I am...

HN

07-13-2004 11:10 AM
HN

I have an ECS N2U400-A & XP-3000+ with 1 GB of DDR400 (3200) dual channel (2x512) RAM. System boots and runs for as little as 20 minutes or as...

Jim Howe

07-08-2004 08:01 AM
Jim Howe

Hi. I've just purchased a Q-tec 340R raid controller <http://qtec.info/products/product.htm?artnr=13237> However I can't make it work with my ECS...

Ryan Kristensen

07-07-2004 11:11 AM
Ryan Kristensen

WinXP (sp1 all updates until about 3 or 4 weeks ago) /98SE Dual boot ECS K7S5A v 3.1 Last Sunday I installed Motherboard Monitor... this may be a...

Ralph D.

07-07-2004 12:35 AM
James J

"PJx" <me (AT) privacy (DOT) net> wrote Story goes; Installed drive out of the box, attempted to partition and format with WinXP Home. Partitioned...

Xeno Chauvin

07-02-2004 12:35 AM
sdlomi2

Anyone know what the maximum drive that can be run on a K7S5A board? TIA

KookaLuke

06-30-2004 10:50 AM
Buffalo

Anyone running SuSE Linux 9.0 or 9.1 on a K7S5A? I can't figure out if there is any way to monitor the CPU/Case temps. within Linux. Thanks in...

kirbalo

06-18-2004 11:06 AM
steve

"C.Pittman" <cpittman1960 (AT) carolina (DOT) rr.com> wrote You must be a dickhead if you really think this works, and even more of a knobhead to...

Paul

06-15-2004 03:37 AM
Kylesb

Just intalled a athlon XP2400+ on my computer. I am using PC133 memory (640MB). Is it worth the extra cost to buy DDR memory. What type...

Joseph Murphy

06-14-2004 02:18 PM
PJx

hi guys put a new board in as above, works fine put on checking the usb properties it does not show enhanced, been to usbman but only mentions 95 or...

John

06-14-2004 01:20 AM
Rotes Sapiens

The less old machine at home sas a k7s5a mobo. I have no idea what exact model. aida tells me the properties as at the bottom of this post. Long...

Newsreader

06-13-2004 11:30 AM
Newsreader

kony wrote: I just installed Norton System Works 2002. I have K7s5a and Promise ATA100 card. You state that Norton/Symantec is "confirmed...

gmnospam@nospam.xyz

06-12-2004 10:24 AM
gmnospam@nospam.xyz

amiflash says that my bioschip is not allowed to be flashed. Where did i do this settings ?

06-11-2004 09:10 PM
Pete Rynas

No, not the usual 'my PC is overheating and shuts down' blah blah blah - but the opposite. I've just been testing out a K7SEM V1.0, updated it to...

Paul

06-10-2004 04:00 PM
Paul

When I restarted my computer one day it took a really long time to get the POST, but the next time I restarted it I got nothing but a light show (on...

John

06-09-2004 05:39 PM
CJT

I have an ECS 865g-m that is having a problem with an FX-5200/256 agp and a high definition TV card MDP-120 pci. The two cards are trying to use...

requiredfield

06-08-2004 10:06 AM
requiredfield

I recently flashed my l7s7a2 bios with a different version than what it was supposed to have, which was the 2/27/03 release version. Not sure...

Mike K.

06-07-2004 06:19 PM
Julian Richards

I have a darn K7S5A mobo that wont show my post, I looked at some other newsgroups and I've tried absolutely everything, I've even resorted to taking...

John

06-06-2004 01:21 AM
Smoker

Hello! Can I have two 512mb/333mhz ddr sticks on my k7s5a mb (total 1024mb)? I think it's ver 1.0 (bios 25-Oct-2002 or sth like it) I have an...

Kostas

06-05-2004 08:42 PM
Shep©

why does it take 2 times to get winXP to shut down? it reboots instead of turning off after the first time you click "shut down" , then after...

Pete Rynas

06-05-2004 07:19 PM
John

Not many posts in this NG any more on the k7s5a, glad to see the k7s5a is mostly "ironed-out". Mine is currently taking a break from service, but...

Kylesb

06-05-2004 12:26 PM
Kylesb

Hi , everyone a little question. Does a AMD 2800xp barton 333fsb work on a K7S6A? THANK YOU, Guus.

RA

06-04-2004 07:16 PM
Cuzman

Hi, I had two 128M PC133 SDRAM modules in my K7S5A. One module has failed. I'm not sure what to buy to replace it (ECC or not)? What brands...

spam@nospam.com

06-02-2004 06:19 PM
Buffalo

I'm trying to get Knoppix 3.2/Debian Linux to wake up and see the embedded ethernet on the N2U400-a motherboard. It keeps telling me that it sees no...

Don Taylor

05-31-2004 04:29 PM
S.Heenan

Yep, it's me again. K7S5a rev 3.1 I would lose my CMOS settings anywhere from once or twice a week to maybe only once a month. It would usually...

Buffalo

05-29-2004 06:45 PM
CJT

I want to use a 160GB WD hard drive on my secondary controller. My K7S5A PRO bios will not see it correctly. My bios is dated 1/20/2003. Will...

Tod

05-29-2004 01:44 AM
Cari

Why does Windows 98SE work with one IDE HD in my system but not two, even though it's booting from the original HD? I was running an 80G Seagate...

larrymoencurly

05-26-2004 07:05 AM
larrymoencurly

XP1800 to XP2400, both are 133FSB tbreds. Dropped from 8241 to 7760. All four "games" turned in slower results and Lobby (high detail) took...

richard6121@excite.calm

05-24-2004 06:51 AM
Smoker

Problem with L4SMG/651+. A lightning strike. A friend bought a computer on TV. When it arrived, they plugged it into a utility power strip and...

Carl Stanley

05-23-2004 12:33 PM
Piercarlo Grandi

Recently picked this up at FRYS with P4 2.8. Putting it together I have several problems I'd appreciate help solving. I've put together many PCs to...

gmnospam@nospam.xyz

05-23-2004 11:19 AM
gmnospam@nospam.xyz

AOpen A600 Aluminum ATX Case anyone got one need some reviews. Yes i have googled, read alot of reviews but one thing i want from the case is the...

We Live for the One we Die for the One

05-23-2004 02:44 AM
We Live for the One we Die for the One

"flipper" <flipper (AT) fish (DOT) net> wrote I was quite clear why one should update the BIOS, to get SSE support, there is no suggestion of any...

Kostas

05-23-2004 02:22 AM
Mike Tomlinson

Has anyone used the above combo? Based on the motherboard's specifications is this Athlon Pro 3100+ CPU a Duron? If this is correct, how will it's...

xxx73

05-22-2004 04:02 PM
DC6093

I have two known good WD scsi hdd (self terminating) that I've moved from a older system, where they were the boot devices, into a new pc with the...

wheel

05-22-2004 02:59 PM
wheel

In message <qlroa05ke911ccgv3u0lc37hm0plg0tike (AT) 4ax (DOT) com>, flipper <flipper (AT) fish (DOT) net> writes after changing the Seagate to the...

Paddy

05-22-2004 02:44 PM
Brian Campbell

All, Thanks for all the past suggestions with my random rebooting problem. Long Story short, my v1.3, 2 year old K7S5A mobo had around a dozen...

kirbalo

05-21-2004 12:27 AM
kirbalo

Just thought i'd post a follow up to my problem - originally within the thread 'K7S5A PRo USB problems' dated 14/5/04. My pc was crashing with a...

Martin

05-20-2004 03:00 PM
Martin

Need help, please. Version 6.0 (identical to 8.0, as best I can tell): won't boot with the included, extra 2-USB- port-apparatus connected to...

sdlomi2

05-20-2004 04:02 AM
larrymoencurly

I have a new K7S5A PRO rev 5.0 with an AMD xp2200 processor and 512 megs of PC-133 sdram, fresh install of Win98se, but the USB ports won't function....

Ray Freed

05-18-2004 11:56 PM
Martin

My neighbor wants to buy my Barton, 2500+, 333fsb. Wants my advice as to what mobo to buy. Will the K7VTA3 (version 8, of course) run the...

sdlomi2

05-18-2004 09:45 PM
sdlomi2

I have a K7SEM v 1.0 motherboard. The trouble is, that the keyboard stops working after POST. The keyboard works fine in BIOS, so obviously the...

Mikko Peltoniemi

05-18-2004 01:24 PM
sdlomi2

I have a M841LR (SiS740 chipset - like K7SOM) that refuses to function with a new 120 GB HD. The hard drive was installed in every possible...

jetgraphics

05-16-2004 11:22 PM
jetgraphics

How do you get the SSE to work with the HoneyX BIOS? Do you have to reinstall the OS after flashing to the HoneyX BIOS? I have an K7S5a ver 3.1 with...

Buffalo

05-16-2004 03:10 PM
Martin Bullivant