I'm getting a "disk error has occurred" message in the bios on a k7s5a I built for my daughter. It's a WD and the WD utilities say it's fine. I've...

Fred

04-14-2004 04:36 PM
Shep©

I've got and old system with a K7VZA mobo in it currently with an 800Mhz T'bird. I've come into possesion of a 1Ghz T'bird and a 1.2Ghz T'bird. Both...

John Smith

04-13-2004 02:24 PM
John Smith

Hi I just upgraded the mobo in my main pc so mow i have my old k7s5a for a basis to rebuild my wifes pc. Just need to get a cpu and gfx card. Will...

pberry

04-12-2004 08:53 PM
Shep©

My question is will the K7S5A pro mother board run a XP 2600+ (266 FSB)? If not what is the largest XP that it will...

joseph

04-12-2004 01:08 PM
Cuzman

I've been running my K7S5A v1.0 for ages using a 1900+ with no probs. Then I put a 2600+ in it and the bios struggled. Machine didnt know what...

John Smith

04-12-2004 12:41 PM
Buffalo

I have the following power problem: After doing a normal windows shutdown (win XP) I cannot restart the computer using the front power switch. I...

Thomas Ramm

04-11-2004 09:04 PM
TX_Dude

"PJx" <me (AT) privacy (DOT) net> wrote snip Can you elaborate on this some more? I see PM8 lists Win2K as a supported OS, but do not see anything...

Ralph D.

04-11-2004 11:44 AM
Ralph D.

Ric- did you try another power supply? I am having the same issue. I also am having flaky network issues- sometimes the ethernet will work, other...

Kevin Collins

04-10-2004 09:23 PM
TX_Dude

Hi, need some help with the P4VMM2. onboard LAN doesn`t work. It`s detected by BIOS and or Sytem (Win2k, Suse 8.2, Knoppix 3.4) but there is no Link...

Wolfgang Koch

04-10-2004 12:11 PM
Wolfgang Koch

hi NG, I bought an L7S7A2 Mobo(http://www.ecsusa.com/products/l7s7a2.html) since it is specified that it supports all XP processors and installed an...

Jura

04-10-2004 02:43 AM
Rotes Sapiens

I've found some cheap memory that is PC2100 : 1 Generic 256MB (32Mx4 DRAM Type) DDR PC2100 266MHz 184-Pin DIMM Memory *Very Low Compatibility *20%...

PJx

04-10-2004 12:42 AM
Kylesb

Got a N2U400-A with a Athalon XP 2600 and cant get past a fraction of a second of the Windows splash screen. Tried all different kinds of...

CafeRacer

04-09-2004 08:07 PM
CafeRacer

Hi, I'm thinking about buying a high end opteron board, but before i shell out the money i want to make sure that it'll be good for a while....

Dan Irwin

04-09-2004 08:56 AM
Dan Irwin

Appreciate help or any suggestions. I have a P4VXASD2+ mainboard with Windows 98SE. I attempted to put XP on the system and it failed to load. No...

JeffG

04-08-2004 07:30 PM
JeffG

i must be very lucky then cuz i have a k7s5a board for at least 4 years and never ahd a problem. rock solid from day 1! i've been so happy i'm going...

nihoa

04-08-2004 08:15 AM
Buffalo

Great board, typing on this machine right now. Only problem is that once I go to shutdown, I know it's gonna hang. I know it's a 98SE problem as...

red

04-07-2004 07:00 PM
Dooin' it

Guys - I also went with the Fry's special, though with the AthlonXP 2400+ with the K7VTA3. ($69). Everything is running fine - seems stable...

Tom Betters

04-06-2004 10:16 AM
Tom Betters

Guys - I also went with the Fry's special, though with the AthlonXP 2400+ with the K7VTA3, ver 6.0c. ($69). Everything is running fine -...

Tom Betters

04-06-2004 10:13 AM
Tom Betters

"bill" <bharned (AT) excite (DOT) com> wrote ECS website indicates that your motherboard will support AMD CPUs up to the XP 2600+ with the latest...

nihoa

04-05-2004 06:12 AM
nihoa

SMART collects info on things like spin-up time, rotational speed consistency, and drive temperature, in order to predict possible drive failure. In...

First of One

04-04-2004 09:13 PM
Rich Webb

A GF4 MX440 isn't going to get you very far in Halo... -- First of One Formula SAE Racing: http://fsae.utoronto.ca/ "Bernie" <bernimlg (AT)...

First of One

04-04-2004 04:17 PM
First of One

Read the following report on the XP-M 2500+ http://tech-report.com/reviews/2004q1/athlonxp-m-2500/index.x?pg=1 Was thinking this might be a nice...

Ernst

04-01-2004 06:15 AM
Brian Campbell

Thanks. "Jakob Nergoi" <qwertzu (AT) justmail (DOT) de> wrote

Buffalo

04-01-2004 12:16 AM
Buffalo

Sven Köhler wrote: Cool. Just saw a review. http://www.ocworkbench.com/2004/asrock/k8s8x/k8s8x-1.htm

steve harris

03-07-2004 05:12 PM
steve harris

Hi, Has anybody successfully tried an AMD 2600 XP-M FSB 266 on a K7VZA 3.0 mobo, Bios 3.7? The ECS processor support website only mentions XP 2200;...

AngelaSW

03-07-2004 01:16 PM
AngelaSW

Depending on which ECS site you go to you get different answers. The USA site doesn't even acknowledge it's existence and the German site seems...

rtr

03-05-2004 10:11 AM
rtr

Hello: Does anyone know if there is a definative fix for the CMOS amnesia problem for the K7S5A-Pro? Thank you, CF

Bilar Crais

03-04-2004 07:11 PM
SPS 700

Hi All, What is the difference between version 1.1 and 1.1A ? I have version 1.1, can I update the bios, only update 1.1A is on line. Bompy

bompy

03-04-2004 02:09 PM
bompy

I have a question on the above board. My PC will not go past the spinning up of the HDD. It gets that far and then dies. I have checked most things...

Ian Coates

03-03-2004 02:39 PM
Ian Coates

Anyone have this mobo yet? Just purchased one, everything working ok EXCEPT Star Wars Knights of the Old Republic crashes to Desktop. Windows XP...

Analog Kid

03-02-2004 06:30 PM
Donald Lewis

Has anyone seen the 755-A2 for sale in the US yet? -- Abit KT7-Raid (KT133) Tbred B core CPU @2400MHz...

Wes Newell

03-02-2004 01:45 PM
Wes Newell

I have a K7S5A with 512meg of memory and an Athlon 1800+. I need to move its 3d card (Nvidia TNT2) to the kid's computer, so I get to buy a new one...

Mark T

03-02-2004 09:51 AM
Mark T

"flipper" <flipper (AT) fish (DOT) net> wrote in message Nor have I. But I should have been more clear in my description. I believe if you lose...

CyBorg 0091

03-01-2004 08:33 PM
Eric Wolfe

I'm considering replacing the 2.0 I'm running now and try to max out with the 2.6 and powerleap adapter. I was wondering if anybody else has tried...

SpaceWalker

03-01-2004 07:40 PM
SpaceWalker

Anyone knows the actual CPU speed of "ECS L7VMM3 w/AMD 3100+? This all-in-one model is not listed at ECS's web site. Last time I got a "PCWAVE...

CWD

03-01-2004 07:12 PM
CWD

I just did a MB replacement with the K7VTA3 v8.0, athlon XP 2500+, 512MB PC2700 (DDR333). I did not change any jumpers on the board, and...

Ron S

03-01-2004 04:18 PM
Wes Newell

I really hate the manual for this board. It doesn't even tell me which PCI slots share IRQs with video card, LAN, etc. And also, when I go into...

Me

03-01-2004 02:16 AM
mmiserus@VERWIJDER_DITxs4all.nl

New L4VXA2 with new power supply, CPU, RAM and hard drive, does nothing---no POST, no beeps. The fans work and the hard drive is working and the...

Robert Ginn

02-28-2004 02:19 PM
Robert Ginn

Hi please I seek all drivers for mothercard ECS K7VZA ( KT133) with integrate sound tanks gerard

gerard v

02-28-2004 08:01 AM
Mr. Slow

Does anyone have any ideas if this combo will work? I'm thinking of putting two sticks of PC150 of differing sizes (512 and 256 Corsair) and...

Wblane

02-26-2004 09:27 PM
despicable

Was working fine 2 days ago, now it won't boot. It powers up, but I get no beep. Then it flashes the HDD, DVD and CD lights alternately. No video...

The Fat Man®

02-26-2004 09:23 PM
despicable

I just read in a post that the K7S5A pro board doesnt work with the AMD XP Barton cpu's. I just bought this board and the 2500 333fsb Barton, I know...

SpongeHead

02-26-2004 08:24 PM
Mick B.

I have a ati radeon 9200 SE video card. I have not been able to get the fast write to be enabled y? I went through bios and display properties still...

amsjsj

02-26-2004 05:07 PM
Julian Richards

ive got one of those boards in my machine....(its a self built pc) and have not had any problems... is it a "copy" or original tht you are upgrading...

Dave B3650

02-25-2004 02:57 PM
Dave B3650

Has anyone had unusually good or bad experiences with the ECS K7VTA3 version 8.0C? What are its pros and cons in terms of both overclocking...

sdlomi2

02-25-2004 11:31 AM
UKnowWhat

The computer in question has a K7S5A board with a Voodoo3 2000 AGP card. When I first built the computer, it worked fine for a few months. ...

towelie

02-24-2004 05:05 PM
GinTonix

Will PC3200 work with my K7S5A ver 3? I'm about to upgrade to 1Gb and wanted to know whether it will work? Am I right in thinking that it will only...

Rich

02-24-2004 04:57 PM
Franck Pissotte

I recently rebuilt a budget system using a ECS K7VTA3 v8.0, Athlon XP 2500+, 512MB PC2700 memory. (The MB, processor, and memory combined only...

Ron S

02-23-2004 11:17 PM
Shawn

I just looked at ECS site and could not see differences between the 5.0 and 8.0 versions except that I think one of the mobos had 3 ram slots and the...

sdlomi2

02-23-2004 08:40 PM
Jeff Hansman

Hi there, I just baught a new ECS K7S5A Pro motherboard for my machine. I boot of a adaptec 29160 scsi card. Once the system posts it will hang...

holocron

02-22-2004 08:07 PM
Smoker