| | Rating Thread /
Thread Starter | Last Post  | Replies | Views |
|  | i have a K7S5A and tweaked my Duron Morgan 1 GHz (FSB 100 MHz, x10)
to become a Mobile Duron.
strange results
several programs reports either FSB 110...
Franck Pissotte
|
02-01-2004 06:22 AM
sdlomi2 | 2 | 41 |
|  | My friend has an ECS G37 Notebook with the following (Relevant) specs:
P4 2.6 Ghz
512 MB DDR Ram
ATI Mobile Radeon 9000 (64 MB)
Windows XP Pro
ATI...
DrHibbert
|
02-01-2004 03:52 AM
float | 4 | 40 |
|  | My mainboard is ECS K7S5A, using latest bios. I can't get USB, soundcard and
the NIC to work together. I have to disable either sound or NIC,...
Arrrgggh
|
01-31-2004 11:36 PM
Arrrgggh | 2 | 36 |
|  | When I set the processor to 133 to get the full speed of the 2400, Windows
XP loads shows the desktop and then hangs while it is loading god...
Robin
|
01-30-2004 03:20 PM
Scott | 3 | 39 |
|  | I purchased Fry's special K7VTA3 8.0C and Duron 1.6G.
No matter how hard I tried, I could not get this combo
to pass Prime95 past 40 to 45 minutes. ...
Jung Kim
|
01-29-2004 03:20 PM
Christopher | 2 | 38 |
|  | I just purchased a new P4 2.4 GHZ processor for my ECS p4VMM2 board. I
have 512 MB PC27000 RAM. The thing is, the board states that it can
only run...
Okkis
|
01-29-2004 12:30 PM
Okkis | 0 | 36 |
|  | Hi, Will 512mb ddr pc2700 (crucial) ram work on in my K7S5A 3.1 board?
Thanks.
Gul
|
01-28-2004 06:09 PM
sdlomi2 | 3 | 36 |
|  | Just fancying a 'retro' games session and wondering if the onboard sound
(SIS7012) on the K7S5A 1.1 supports DOS games - either in a DOS box or...
Watch Elm
|
01-28-2004 05:55 PM
Watch Elm | 0 | 40 |
|  | Im wanting to upgrade my graphics card. Im looking at a radeon 9800
pro. Ive got a k7s5a mobo. Is there any problems using this type of
card with my...
pwrberry@yahoo.co.uk
|
01-28-2004 04:49 PM
Paul Edwards | 4 | 38 |
|  | I have a k7sem, w/ duron 1.3, with xp installed. The system boots fine
without sound or modem installed. I tried the built in sound and system
locks...
William Long
|
01-28-2004 11:08 AM
William Long | 0 | 39 |
|  | Hi
Is there a fix to run a hard disk >= 40GB on this board?
Latest BIOS is from 1999 and I can't run larger disks, unfortunately.
Greetings
jOSe
Jose
|
01-27-2004 05:33 AM
Brian Campbell | 1 | 41 |
|  | Hi
I have my computer with a K7s5a (version 1.0) with AMD Athlon 1.2 g running
for 2 years now (24/7), and since a couple of weeks I have this... |
01-27-2004 04:05 AM
Bruce Graham | 4 | 38 |
|  | Does anyone have the USB pinout for K7VTA3 please?
The wires I have from the 2 ports at the front of my case are as follows
(1) +5 red
(1) -D...
Lockzie
|
01-27-2004 03:39 AM | 1 | 43 |
|  | Good day all,
I recently tried to flash update the BIOS on this K7SEM 3.0C
Motherboard. I got the flash file and instructions from the ECS
website....
Darcy Parker
|
01-26-2004 11:08 PM
Darcy Parker | 0 | 39 |
|  | I don't see a reason why any component has been confirmed
good. For example, a defective power supply could do symptoms
posted. Collect...
w_tom
|
01-26-2004 04:18 PM
w_tom | 0 | 36 |
|  | I currently use (2) PC2100 256MB sticks on my K7S5A PRO.
I was thinking of replacing one stick with a 512MB, giving total memory to
768MB.
Does the...
Tod
|
01-26-2004 12:02 PM
PJx | 2 | 39 |
|  | I know this is an old MB but I'm trying to put a 120Gig drive on it
but it just take it. My bios is 2.2e.
The drive was formatted and my win xp...
jy
|
01-26-2004 05:06 AM
Brian Campbell | 2 | 38 |
|  | With known good working memory installed this mainboard powers up then shuts
itself off after just a few seconds. The power will remain on with...
Gary James Chambers
|
01-25-2004 12:17 PM
Gary James Chambers | 0 | 42 |
|  | My motherboard is a K7S5A PRO (5.0)
and using Windows XP home, with latest updates.
In device manger I have listed "VIA ver 5 or later USB Universal...
Tod
|
01-25-2004 10:06 AM
Bilar Crais | 3 | 38 |
|  | It powers up, but I get no beep. Then it flashes the HDD, DVD and CD
lights alternately. No video.
I had set the CPU Speed at the wrong speed in the...
Earugo
|
01-24-2004 08:20 PM
Zaphod Beeblebrox | 2 | 38 |
|  | Will the 1.6 Duron Applebred run OK on the ECS K7S5A-Pro? Will it run
with PC133 SDRAM, or does it NEED DDR? I already have DDR PC 3500 &...
sdlomi2
|
01-24-2004 05:31 PM
Bilar Crais | 6 | 45 |
|  | grandma & i went to frys in wilsonville and got "talked into" the abit combo
deal (kd7a & 2500+ for 140).
it loaded right up and i did remember to...
tony
|
01-24-2004 01:23 PM
Shepİ | 1 | 43 |
|  | I'm putting together a new system with a K7S5A-Pro. Would like to have
it ready to accept an upgraded cpu later on (prolly going w/a 1.6 Duron
now),...
sdlomi2
|
01-23-2004 02:43 AM
mjh | 1 | 38 |
|  | Hello all,
i have had one of these boards for about 8 months and not really come
accross any problems - until now
I recently purchased a Western...
Rob Latus
|
01-22-2004 09:32 PM
James | 7 | 44 |
|  | the subject pretty much states what i'm trying to figure out ...
I have a pci video card and need to put it in the first slot. the
manual says i...
futureman
|
01-22-2004 12:16 PM
Cari | 5 | 33 |
|  | I cooked the CPU in my wife's computer (I'm an idiot who's now sleeping on
the couch). Would like to replace it with best one that'll fit the MB....
Dr. J. Smith
|
01-22-2004 12:37 AM
Bill | 3 | 41 |
|  | I have this mobo for about 8 months now and I never had any trouble
booting, but for about a week now, I had a lot of problem getting my
computer...
JC
|
01-21-2004 09:20 PM
JC | 0 | 39 |
|  | I have a question about a memory problem with the K7S5A.
The system in question uses an Athlon XP 2000+ and two 512MB SDRAM modules.
Onboard audio,...
Max Norris
|
01-21-2004 09:13 PM
Buffalo | 2 | 39 |
|  | hello i was hoping that someone could solve the problem that i am having not
getting the motherboard installation disk or the operating system(win...
Exceptions1
|
01-21-2004 02:40 PM
Jimmy | 1 | 41 |
|  | I have a P4IBMS mainboard http://www.ecsusa.com/products/p4ibms.html. I
recently re-installed Win2K, this time, Win2K will not recognize the
on-board...
==Blitz==
|
01-20-2004 09:03 PM
==Blitz== | 0 | 45 |
|  | Hi,
I use an ECS P6BX-A+ motherboard. I'd like to add a Creative Labs Audigy 2
SoundBlaster OEM card to it.
Is anyone using this board and...
TC
|
01-20-2004 01:03 PM
TC | 0 | 43 |
|  | I have a k7s5a w/athlon 1.2ghz and a volcano 5 heatsink. I was having
problems with it spontaniously reseting when doing processor intensive
things...
darryl
|
01-20-2004 04:47 AM
biggs | 4 | 43 |
|  | BAD BIOS CHIP FLASH?
VISIT:
http://bioschips.nlan.org
For Replacement chips $15
re-flash of existing chip $8
iCE Flashing iNC
|
01-19-2004 04:24 PM
iCE Flashing iNC | 0 | 38 |
|  | No slaves: on IDE1 cannot have 2 HD but could have HD master and CD slave.
on IDE2 cannot have 2 CD drives, one only. all drives set on CS, will...
frank
|
01-19-2004 01:19 PM
frank | 0 | 40 |
|  | Hi all,
im having problems with a K7S7A2 board i bought a while ago.
After some general wierdness i decided to flash the MB to the latest
BIOS...
ST!NG
|
01-18-2004 06:16 PM
Julian Richards | 6 | 40 |
|  | Hi all,
im having problems with a K7S7A2 board i bought a while ago.
After some general wierdness i decided to flash the MB to the latest
BIOS...
ST!NG
|
01-17-2004 05:00 PM
ST!NG | 0 | 49 |
|  | I am running 98Se, clean install. All patches applied. If my pc stays on all
night it locks up and I have to do a hard boot. Power Management...
ExtantOne
|
01-16-2004 06:26 PM
Rotes Sapiens | 3 | 37 |
|  | the subject pretty much states what i'm trying to figure out ...
I have a pci video card and need to put it in the first slot. the
manual says i...
futureman
|
01-16-2004 01:01 PM
Cari | 7 | 44 |
|  | Help! Is anyone running a 1-gb memory stick in the L7S7A2 mobo? The specs
say it can take up to 3 gigs of DDR2700, but very few of the...
Steve Guidos
|
01-16-2004 10:59 AM
Steve Guidos | 0 | 37 |
|  | running xp pro, already have a 30G drive.
current k7vza bios is ver 3.2 3/14/2001
it detects my 120G maxtor as a 33.8G drive.
which bios version...
ETSUN
|
01-16-2004 05:16 AM
Steve Friedman | 3 | 43 |
|  | Hi,
Can anyone tell me how can I monitor temperatures on this notebook?
The BIOS doesn't have any information and AIDA32 don't recognise...
Marco
|
01-15-2004 09:23 AM
Marco | 0 | 41 |
|  | How do I get the K7S5A to recognize 40GB Seagates?? 60 and 80GB models work
great!
I've got a K7S5A with 256MB RAM, Duron 1.3 and a 450-watt power...
James
|
01-14-2004 08:17 PM
Gonzo | 15 | 64 |
|  | When I shutdown the machine from XP it looks like it shuts off properly.
When I try to power it back up by pushing the power button nothing...
Will
|
01-13-2004 10:12 AM
Chuck Olson | 3 | 39 |
|  | Hello,
I currently have 512 Mo DDR, 2100 or 2700, I don't even remember :), on one
stick with an Athlon XP 2000+ (no overclock).
Everything is rock...
N E
|
01-13-2004 02:14 AM
Hasj Pee | 2 | 38 |
|  | I have installed a new ECS L4VXAG board to day with a Celeron 2.4GHz (which
incidentally is overclocking @ 3.2GHz beautifully). However,...
Seinman
|
01-12-2004 06:39 PM
Ian Hastie | 11 | 186 |
|  | I'm getting POST beeps, but wildly fluctuating case temperature. Like you
the CPU temp appears stable.
"Donwo" <donlorchnospam (AT) hotmail (DOT)...
Robert Pang
|
01-12-2004 12:42 PM
Robert Pang | 2 | 43 |
|  | Hi
I have the k7vta3 with bios 3.0d.
I can't get the usb 2.0 to work 98se or xp pro does not register it. I cant
find anything in the to tweak bios...
Jakob Kjelds
|
01-12-2004 12:28 PM
Mike Mastro | 1 | 35 |
|  | Hi
I have an K7S7AG with an AMD Athlon 2000+. Does the dram frequency in
the setup portion of the bios get set at 1-1 ratio 133mhz OR 1-2...
Richard Weedermyer
|
01-12-2004 12:28 AM
Richard Weedermyer | 0 | 48 |
|  | A strange problem has appeared on my machine this evening and it's
bugging me.
Setup is:
L7VTA V1.0
AMD Athlon 2400 (1.99ghz)
2x256 PC2700 DDR...
Dave Aston
|
01-11-2004 11:18 AM
mikehd | 1 | 41 |
|  | BAD BIOS CHIP FLASH?
VISIT:
http://bioschips.nlan.org
For Replacement chips $15
re-flash of existing chip $8
iCE Flashing iNC
|
01-11-2004 09:51 AM
iCE Flashing iNC | 0 | 50 |