I was one of the suckers burned by EZBPC, returned a MB the week they folded. My other PC has a motherboard identified by Belarc as a ECS M830LU but...

stumpy

12-01-2003 09:48 PM
SLIM

Hi! I finally got an XP 2400+ working on my K7S5A Pro motherboard, thanks also to the very good HoneyX BIOS! With it, I enabled the I/O APIC which...

Daniele Gratteri

12-01-2003 07:11 PM
Shep©

Hi I have an K7S5A (orginal Bios 1.0). My first problem is that I have a distorted sound in some games (e.g. Need For Speed Underground,...

Ulrich Althaus

12-01-2003 01:44 PM
Remco

Hallo Leute, habe gerade ein K7SOM+ 7.5C in einen PC gesetzt und mit W98 in Betrieb genommen. Leider mit einigen Problemen; die beigelegte CD...

Michael Vogt

12-01-2003 12:33 PM
Frank Husel

I've moved on from My K7S5A to a 333fsb system. However I'm determined to have a go at sorting my old mobo for use in a spare machine. My K7S5A ate...

Ebodski

11-30-2003 07:17 AM
Mike Tomlinson

I'm using ADSL with the onboard Lan of K7S5A pro motherboard. It comes to my notice that the downloading speed of edonkey2000 will drop dramatically...

rc5

11-29-2003 09:33 PM
rc5

I am going to format the hard drive on my machine since I put a new K7VTA3 motherboard in it. There was a motherboard with a Intel BX chipset on it...

David Hunker

11-29-2003 09:40 AM
Shep©

Problem: How do I use four rear USB 2.0 ports on w98se K7s5a pro motherboard. System: Motherboard: K7S5A Pro board Bios (newest official) CPU: AMD...

Tinklemagoo

11-28-2003 12:10 AM
Rotes Sapiens

Can someone tell me if my k7s5a motherboard will cause the power supply fan to slow down when the computer is in standby or hibernation. Do I need...

Seth

11-27-2003 08:08 PM
Matter of contention

The user password protection in the BIOS only keeps the Bios from being accessed. What do I set in order to stop the computer from booting up...

David Hunker

11-27-2003 07:33 PM
David Hunker

Looking to upgrade from ECS K7S5A AMD Athlon XP 1900+ 512MB PC133 SDRAM to MSI KT6 Delta LSR AMD Athlon XP 2600+ (Barton) 512MB PC2700 DDR. Will I...

xxx73

11-27-2003 11:48 AM
Harrie Geerts

Just wondered if anyone else has seen this behaviour before and if there is a cure? Running a k7ama with latest bios with a xp2000+ ( windows 2000...

huzden

11-27-2003 05:44 AM
Mr. Slow

I have this motherboard, purchased it awhile back with an Athlon XP 2100 (1.753 G) and FINALLY about to put it all together. I realized--oops--I...

Larry R Harrison Jr

11-27-2003 04:13 AM
Mr. Slow

I am trying to get into the bios on an elite mb for a friend who has forgotten his password. Can it be done by shorting the appropriate jumper...

whistle

11-26-2003 04:29 PM
huzden

Hello, Is it possible to put CPU INTEL CELERON 1,20 GHZ - SOCKET 370/100 MHZ/256K CACHE on a p6vaa http://www.ecsusa.com/products/p6vaa.html

Luc

11-26-2003 02:07 PM
Luc

I've used the k7s6a motherboard for a long time. It works fine, but sometimes it will reboot spontantaneously. I is doing this regardless of what...

Mats Forssblad

11-26-2003 05:58 AM
Tannish Virus

I no longer have my K7S5A, but could still be suffering from the after effects... My K7S5A pushed my patience too far and I ended up dumping it, but...

Ebodski

11-24-2003 05:40 PM
Hippy Paul

I am installing a K7S5A MB running XP. On Bootup, everything is fine until XP tries to complete boot process and display normal screen. No video can...

garsch1

11-24-2003 11:38 AM
Mr. Slow

Just put a system together for a relative using a K7VTA3 rev 8 motherboard. Works great with a 32 meg SIS video card. I was wondering if there is...

SLIM

11-21-2003 11:14 PM
SLIM

Hi, i have this (obsolete :) ) m/board.. I see that there is a header (2x5) named (J5).. i ve read on a site called www.powerspec.com that this J5...

Chris S

11-21-2003 10:37 AM
Chris S

I am getting a a reading on the -12V of -1.97V in my BIOS on a K7S5A Pro with an Athlon XP 2100 overclocked to 1.9G. I have had a few times that as I...

Russ Chewning a.k.a. Pogue

11-20-2003 03:04 PM
Hippy Paul

trying this again "Chris Johnson" <cjohnson45 (AT) houston (DOT) rr.com.invalid> wrote

inwiththenew

11-20-2003 11:31 AM
inwiththenew

Why I can't set CPU at 133 and memory at 166 even setting in asyncronous mode??? Also memory timings seem strange. If I set cas2 sandra reports 2.5,...

Monzali Daniele

11-19-2003 02:41 PM
Alain DEMOY

I'm trying to move in to a new hard disk and give the old away. I installed windows on the new one, moved all my files and I was ready to start...

Psymaster

11-18-2003 08:46 AM
Psymaster

Hi ! I want to upgrade my PC system (K7VZA Rev. 3 newest BIOS) with an Duron 1600 or 1800 with FSB 133Mhz. Does it works on this Mainboard...

Michael Trautwein

11-18-2003 04:30 AM
Mr. Slow

Hi Everyone. What is the highest rated proc I can use on the K7S5A? I have no intention of overclocking. Many thanks in advance. Ray

Edge

11-18-2003 03:03 AM
Edge

I have an ECS K7S5A ver 3.1 and so does a friend - the only difference is that mine has a small white sticker near the version number that has a...

Hippy Paul

11-17-2003 05:01 AM
eric ve

I have 10 mainboards L4VXA2 with the same problem: The PC is blocked / halt on everytime and I have proven to change several CPU's (P4 2.4, 2.8,...

Elite

11-17-2003 03:07 AM
Elite

I've got a p6vap-a+ PIII 866 with a WDC UDMA 66 30G harddrive and W98 SE.. HDTach is claiming that my Read Burst Speed is on the order of 22 MB/s. ...

Paul

11-16-2003 01:44 AM
Paul

My machine has a K7S5A, 1.3 Athlon, half a gig of ram, and an Enermax EG465P 431w PSU and I'm running XP. I had been using a GeForce2 Ti and had no...

Ryan Quick

11-15-2003 11:15 PM
Rotes Sapiens

Just flashed honey x bios onto K7S5A. All seems well on the bios setup screen but can't get into windows, hangs at searching primary ide. Tried...

John Faircloth

11-15-2003 05:38 PM
joef

Anyone got one of these working? Just installed a new one in a system that was running a 120GB IBM and it's ID'ed as a 181.3GB drive. Any clues? ...

Eric Wolfe

11-15-2003 02:31 PM
Eric Wolfe

Thorton is a Barton with 256kb 2nd level cache and 266 Mhz FSB at 1667, 1800 and 2000Mhz as...

agw@supersonic.ruhr.de

11-15-2003 10:32 AM
Luca Andena

Hello! I have recently built a new Windows XP Pro SP-1 system based on the k7s5a. It has an AMD Athlon XP 2000+, 2*256Mb DDR Samsung, 60Gb ATA 133,...

Hasj Pee

11-15-2003 01:13 AM
Tricky

L7S7A2, 2500Barton, Thermaltake Volcano 6cu+ HSF, 512MB Crucial DDR PC2700: CPU 49C temp steady. The System temp fluctuates dramatically every...

Psymaster

11-14-2003 06:10 PM
Slang

is it work together?

Psychik

11-14-2003 12:42 PM
Psychik

Does someone has experiences with L7S7A2.V1.1A mainboard? Is it as stable and easy as K7S5A (pro) mainboard? Can I boot my Windows XP that is...

Fred

11-14-2003 03:19 AM
Fred

I have a k7vta2 motherboard, Athlon xp 1900, and DDR ram. This came as a combo. When I boot with the FSB jumper @ 133, the boot screen says Athlon xp...

Steve P

11-13-2003 07:29 PM
Steve P

I've a K7VTA3 V5.0 mobo with 512mb of crucial pc2100 ddr ram, no ecc, not registered, fully compliant with the mobo. So i disabled quick power-on...

Han

11-12-2003 05:00 PM
Han

Hello, I have a k7s5a that I've been running for about a year. A few months ago, I put in an Athlon 2400+. It runs fine at the lower bios cpu...

Slug

11-12-2003 10:10 AM
Buffalo

Will the Mobo K7s5a run this (newegg.com) AMD ATHLON XP 2500+ "Barton" 333 FSB PROCESSOR CPU I wasn't sure because it was the Barton and the 333...

jm

11-12-2003 01:31 AM
Kyle Brant

well , i got the hard drive ide problems fixed( embarrasing- had a jumper onn the fsb only on one pin!) however i still , no matter what i do ,...

Pete Rynas

11-11-2003 06:58 PM
Pete Rynas

i know this is slightly OT, but as a K7S5A owner, and some good advice in the past, hopefully someone can answer this. my PC crashed this evening,...

Sid Fishes

11-11-2003 12:00 PM
Sid Fishes

I've got a Trinity 2390 with a bad CPU. It was a 1 GHz. Tyan's web site indicates that the max I can put in there is a 1 GHz, but I'm having...

dym

11-10-2003 11:16 PM
MJH

if i hook up a secondary IDE data cable , the master HD on IDE 1 will not boot ( no beep , power supply turn on , video ect !!) if i pull...

Pete Rynas

11-10-2003 06:13 PM
Pete Rynas

I been having a slow memory problem with the P4S5A 5.1 Board. Memory benchmarks at around 450 with Sisoft - It should be at least 1500. I'm using...

Lou

11-10-2003 11:09 AM
Lou

Why I can't set CAS Latency at 2?? I Have a Duron 1300. I tried with kgood4 and 1.0f bios setting the bios in every possible way (syncr, asyncr,...

Monzali Daniele

11-10-2003 06:06 AM
Monzali Daniele

I recently bought a new comp from a local comp store... it consisted of ECS p4vmm2 533fsb motherboard, p4 2.66Ghz processor,40G 7200rpm maxtor HD,on...

dwilk2

11-10-2003 01:55 AM
dwilk2

All, I am building a K7S5A Pro board with a GeForce 4 MX-440 SE video card. When it POSTS, I get somewhat readable BIOS info, but it is...

Kirbalo

11-09-2003 08:44 PM
MPJOHNS

Has anyone out there tried to increase the FSB on the P4VXASD2+ V5.X with either SetFSB or CPUCool I have tried both and both lock the machine...

CompDoc

11-08-2003 11:18 AM
CompDoc