| | Rating Thread /
Thread Starter | Last Post  | Replies | Views |
|  | Getting this almost every time I boot up, but the battery is fresh, reset
jumper in correct position. I've reset and re-flashed bios, but...
KenB
|
03-12-2007 07:43 PM
KenB123 | 2 | 321 |
|  | I am finally getting around to putting my system together. Everything
seemed to be going great until I tried to hook up the speakers.
With...
ijourneaux
|
03-10-2007 03:07 PM
ijourneaux | 3 | 283 |
|  | Hello all
Got the subject m/b, was always running with a max temperature of the CPU at
70 degrees, system was running fine for the past half year.
No...
Bert
|
03-08-2007 05:47 PM
ttoomm | 5 | 326 |
|  | I have an EliteP4M800 motherboard. Have no sound. Everything is enabled, downloaded, compatible, no question marks ect. and I am going mad trying to... mselishea |
03-02-2007 12:15 PM
Paul | 1 | 380 |
|  | I need some help with removing some yellow question marks in Device Manager
for my computer.
I recently had hard drive problems on my computer,...
rhino
|
02-21-2007 01:40 PM
Ian Shef | 1 | 274 |
|  | what is the max total DDR2 553 memory can be used on this P4M800Pro-M
v1.0A? at full speed?
the Processor P4 Dual 524 3.06 GHz?
right now 2 of the...
GG
|
01-30-2007 03:13 PM
GG | 0 | 302 |
|  | will pc 3500 work on this board? or is there a different voltage and/or pin
count? in other words if the above is true will pc3500 "fall back" to...
Pete Rynas
|
01-26-2007 10:46 AM
Kyle | 1 | 254 |
|  | finally am getting no more errors or blue screens and everything WAS going
good - now ,and it did happen before, when i turn it on sometimes i get...
Pete Rynas
|
01-24-2007 08:41 PM
Boppie | 6 | 282 |
|  | I have a generic PC with a failed PSU. The description the PSU says
lpm2-20. I need a replacement. How do I determine what replacement I
can use? My...
bruce6230@gmail.com
|
01-23-2007 05:49 AM
Paul | 7 | 255 |
|  | Hi
I have been having trouble with my new build computer. It crashed at random
requiring a reboot.
I have managed to trace the problem to the Nvidia...
Paul Lower
|
01-15-2007 04:18 PM
steve | 1 | 339 |
|  | Since ECS offers a BIOS update download that purports to address
compatibility issues, I downloaded and installed it successfully (e.g.
flashed and...
latchamba-google@yahoo.com
|
01-10-2007 09:10 PM
latchamba-google@yahoo.com | 0 | 270 |
|  | My motherboard (MSI-6561) runs an AthlonXP 2600+ at 300MHZ FSB, yielding a
true clockspeed of 2.25GHz. I use PC2700 DDR RAM, underclocked from 333...
Herbert Boehl
|
12-29-2006 02:32 PM
Herbert Boehl | 0 | 270 |
|  | which is a better motherboard in term of supporting fastest cpu?
I've AMD Sempron +2600 CPU and DDR 400 memory.
mmdir2005@yahoo.com
|
12-29-2006 10:57 AM
Herbert Boehl | 1 | 272 |
|  | A mate gave me his PC to fix - it had intermittent blue screens and file
corruption in Windows. Now sorted out, but while working with it, I
noticed...
Mike Tomlinson
|
12-20-2006 05:20 PM
John Jordan | 8 | 270 |
|  | How would a K7s5a board with official bios recognize a barton (333 fsb)
processor. I assume an OC Bios would use most of it's capabilites
Thanks
BW
Wingding
|
12-15-2006 08:45 PM
Brian Campbell | 1 | 282 |
|  | i have had nothing but trouble with this board!! anyone else???
Pete Rynas
|
12-07-2006 11:12 PM
Pete Rynas | 20 | 623 |
|  | I just got a new computer with the P965T-A and was trying to install
Windows into. The major problem I have is that when the HD is plugged
in it...
fission25@gmail.com
|
12-05-2006 10:00 PM
fission25@gmail.com | 0 | 272 |
|  | What is a good replacement for ECS K7S5A? (I don't wish to spend as
much as Asus A7N8X costs.) I built a # of these systems, few years ago,...
sdlomi2
|
12-01-2006 09:23 AM
sdlomi2 | 4 | 388 |
|  | Its an ECS board but asume its elite as well ??
Anyway i have a freind who has the board. And he is in desperate need
of an upgrade.
Hes got a...
Home Theatre Guy
|
12-01-2006 01:42 AM
sdlomi2 | 1 | 276 |
|  | "qwerty" <qwerty (AT) ihopethisisnotadomain (DOT) com> wrote
Also assuming it is not running too cool, you must wish to quieten it. Best
thing to...
sdlomi2
|
12-01-2006 12:16 AM
sdlomi2 | 0 | 293 |
|  | "Peter Meister" <pmeister2 (AT) lycos (DOT) com> wrote
It's in the BIOS.
If you install another BIOS (there are some good ones listed in the...
Buffalo
|
11-26-2006 11:55 AM
Buffalo | 1 | 288 |
|  | "Peter Meister" <pmeister2 (AT) lycos (DOT) com> wrote
Just order a card from Pricewatch or go to a computer store. It will be a PCI
card and...
Buffalo
|
11-26-2006 11:08 AM
Buffalo | 0 | 338 |
|  | Hi all. The local Fry's has this motherboard and a bare Athlon 64 3500+ for
$199. Seems like a good deal, but after some research I see that the...
WaterWatcher
|
11-18-2006 12:17 AM
SUNL IS JUNK | 15 | 990 |
|  | I upgraded an older ECS motherboard (K7VTA2) from 1 x 128 MB SD-RAM to 2 x 512 MB DDR-RAMs.
Yes, my Motherboard has two different...
Peter Meister
|
11-15-2006 12:57 AM
Kyle | 1 | 315 |
|  | when running a sata drive in the IDE mode , not the RAID mode is it faster
than a regular eide 133?? only have a single sata and was wondering??...
Pete Rynas
|
11-07-2006 09:00 PM
Pete Rynas | 0 | 253 |
|  | Hi..
I never hear any post beeps on either of two N2U400-A boards I have. The
case speaker has only two leads, but there are three pins on the board...
KarlB
|
11-02-2006 01:52 AM
Paul | 1 | 268 |
|  | I have written a review of my experiences with the ECS P965T-A at:
http://www.mindspring.com/~anorton1/
I think you would find it informative if you...
Alan Norton
|
11-01-2006 10:26 PM
Alan Norton | 0 | 268 |
|  | Have an ECS Nforce 570 SLIT-A (V5.1) mobo that will not post. I had 2
gigs of ram installed, turned on the machine and got 1 long beep (Award
Bios)....
Machine Messiah
|
10-16-2006 09:38 PM
Machine Messiah | 2 | 276 |
|  | You use DDR (PC3200 and lower) - NOT DDR2 as I assumed. I bought DDR2 when I
got the board assuming that it required that. After I got home and read...
Leon Willard
|
10-11-2006 03:20 AM
Leon Willard | 2 | 280 |
|  | Fry's has this board for $29. Sounds too good to be true..is...
Homer
|
10-04-2006 12:57 PM
Brian Campbell | 1 | 312 |
|  | a friend of mine is having hard drive issues with this board. i
recommended he run spinrite, and the first thing it told him was there
was a bios...
wijjawill@gmail.com
|
10-04-2006 12:52 AM
wijjawill@gmail.com | 0 | 362 |
|  | Hi
I have just rebuilt my computer with this board and a Athlon 64 3200+. I
finally got it to boot after trying various combinations of memory. With... 
Paul Lower
|
10-03-2006 05:21 PM
zvy1980 | 5 | 507 |
|  | Hi,
My old 300W ATX psu is dead. I'm interested in a Fortron FSP-350-60GLN
- 350W Green
Power ATX silent or the same model in 400 W (they have got a...
s45_nospam@free.fr
|
09-28-2006 12:21 PM
s45_nospam@free.fr | 0 | 277 |
|  | If you need help with your computer problems, please come and join our
free computer support forum. We are happy to assist you in anyway...
Pensacola Computer Guys
|
09-25-2006 11:30 PM
Pensacola Computer Guys | 0 | 277 |
|  | I picked up a new ECS RX480-A motherboard.
My old ATX power supply has a 20 pin connector and does not have the 4
pin ATX12V connector. So it looks...
ric.duncan@verizon.net
|
09-25-2006 05:06 PM
ric.duncan@verizon.net | 0 | 311 |
|  | Does the BIOS in the ECS L7S7A2 support drives bigger than 137GB? I've
bought a 160GB WD, and read here that my K7S5A won't support it, so...
RSMilward
|
09-25-2006 07:20 AM
RSMilward | 4 | 268 |
|  | Hi!
Visit Crayeon3 Worldwide today -- http://www.crayeon3.com
At Crayeon3 Worldwide, you can buy a host of computer components and accessories, and...
Jami J.
|
09-16-2006 12:04 PM
Jami J. | 0 | 297 |
|  | I'm rebuilding a system built around a K7SEM V1.0 after a complete HD
failure, and I need a lead on the chipset drivers.
None of the USB connections...
Me
|
09-02-2006 11:32 PM
Brian Campbell | 1 | 290 |
|  | Hi I have a L7S7A2 with an ATI Radeon 9600SE. My problem is every few
weeks I have trouble booting up my computer. I get 1 beep then 8...
erables40@gmail.com
|
09-02-2006 09:44 AM
erables40@gmail.com | 2 | 281 |
|  | Hi,
I'm putted together a computer with some spare parts, including the K7VTA3
Ver. 8. The first thing I noticed was the harddrive seems very slow....
Stimpy
|
08-20-2006 02:08 AM
Stimpy | 1 | 300 |
|  | I am trying to flash my ecs k7s5a (rev ??) with "HRTIBIOS v9.00" rel.
11/06/2004, but it won't work!
Rather the 'press ctrl+home' doesn't seem to do...
KKJ
|
08-15-2006 12:25 PM
Eric Wolfe | 5 | 312 |
|  | hello everyone,
I have a computer with a K7S5A motherboard and an AMD Duron processor
running at a clock speed of 1.2GHz and 512MB of DDR ram. I...
patrickantoun (AT) gmail (DOT) com
|
08-13-2006 12:56 PM
Eric Wolfe | 4 | 81 |
|  | I have had this MB for awhile without many complaints. Today, it booted
found my two HDs. After powering down the system and rebooting it no
longer...
Flash
|
08-09-2006 09:27 PM
Flash | 0 | 79 |
|  | does'nt anyone know anything about the 848-P ver 2.0 and how to set up the
bios etc--see previous post thnak you pete rynas
Pete Rynas
|
08-09-2006 12:13 AM
Pete Rynas | 0 | 137 |
|  | no matter what setting i use in bios sata not "seen"?? i have disabled and
removed the primary IDE cable( i know for a fact that this board won't...
Pete Rynas
|
08-07-2006 06:55 PM
Pete Rynas | 0 | 87 |
|  | I just set up a system with a P4M800PRO-M V1.0A M/B, and a Pentium D 805
(dual-core) CPU.
For some reason, the OS is only able to see one core of...
shankarunni
|
08-01-2006 09:20 AM
tcsenter | 1 | 120 |
|  | Hello all
My m/b is a ECS P4M800PRO-M
Has got Realtek ac97 sound.
Made is dual boot, W98se and W XP.
From W98se I can go into real Dos mode, have...
Bert
|
07-19-2006 02:00 PM
Bert | 8 | 79 |
|  | As header, I have googled but there are so many versions I am lost. Can
anyone point me to a suitable version to fix this problem?
TIA for any...
Paul
|
07-19-2006 08:40 AM
Eric Wolfe | 1 | 69 |
|  | What do driver version 1.18 and 1.19 offer over v1.17 (which I have
installed) for the SIS900 on K7S5A? I don't see any notes on the...
AT
|
07-19-2006 08:29 AM
Eric Wolfe | 6 | 124 |
|  | Has anyone encounter this problem:
When I increase the FSB pass 240, the board won't recognize my SATA
drive. Any solution? I updated to the latest...
knite75
|
06-21-2006 12:02 PM
knite75 | 0 | 79 |