| | Rating Thread /
Thread Starter | Last Post  | Replies | Views |
|  | my sys:
Windows XP Pro SP1
ECS K7S5A mobo last ECS Bios release
Athlon 2200XP
512MB DDR PC2100 Ram
80 gig 7200 HD
40 gig 7200 HD
PCI USB 2...
Sid Fishes
|
11-08-2003 10:24 AM
Gary Lightfoot | 3 | 39 |
|  | The jumpers go as up as 12.5, and that's what I'm currently using. I
guess this means that bigger multiplier settings are supported, as long
as they...
Psymaster
|
11-07-2003 03:23 PM
Psymaster | 2 | 37 |
|  | Wierd problems. I know the K7s5a can lose its CMOS, but this was
strange. I downloade iTunes and rebooted (XP Pro.). Then upon reboot
the OS says...
jm
|
11-07-2003 06:53 AM
jm | 2 | 35 |
|  | Anyone using the AF1 Deluxe? If so how is it?
Nystagmus
Nystagmus
|
11-06-2003 08:08 PM
Nystagmus | 0 | 43 |
|  | I struggled with this problem for a few days. Turns out that when you
turn on the system it beeps 4 times then shutsdown means the BIOS is
detecting...
Less Than 0
|
11-06-2003 06:40 PM
Less Than 0 | 0 | 32 |
|  | Have 1209 Honey X BIOs installed.
Have tried Wimimage and Floppy Image to format and write Ghost 2003 using
1.68MB format. Neither will work, get...
Toots
|
11-06-2003 04:41 PM
Toots | 0 | 35 |
|  | Remember the
Athlon XP 2100+ (Overclocked thru BIOS up to 1.9G)
512M DDR 2100
Windows XP
Sapphire Radeon 128 Pro
machine I was struggling to put...
Russ Chewning a.k.a. Pogue
|
11-06-2003 10:46 AM
Kyle Brant | 1 | 37 |
|  | Hi, i have a BIG problem...
I use normal usb connector for the onboard extra usbports
But it wont work...
Anyone any idea what the problem can...
John
|
11-06-2003 08:18 AM
JimL | 2 | 37 |
|  | Hi all,
my buddy had the misfortune of having his system infected with a bunch of
virus.
So many in fact, it was easier to do a clean install of...
Greg
|
11-05-2003 11:39 PM
Greg | 6 | 34 |
|  | Can somebody tell me, because I want to buy a new processor and I don't know
what is the fastest one that will work fine with k7s5a (v.3.1).
Butcher
|
11-05-2003 02:45 AM
Stefan Kramperth | 7 | 34 |
|  | In article <slrnbpqmcs.1me.removethis (AT) gmx (DOT) net>,
ras2 <removethis (AT) gmx (DOT) net> wrote:
It's actually quite annoying on my machine,...
Mike Tomlinson
|
11-04-2003 03:53 AM
Philip Armstrong | 22 | 69 |
|  | Hi! Do you know what would happen if an Athlon XP (Thoroughbred-B) installed
on an ECS K7S5A Pro overheats? Would the system hang up and then power...
Daniele Gratteri
|
11-03-2003 12:55 PM
Daniele Gratteri | 0 | 40 |
|  | I have had this v. 1.x board for a while now. And all of the suddon the
extra usb stopped working. The two ports on the back work fine. But...
BigK
|
11-03-2003 08:53 AM
BigK | 3 | 31 |
|  | Mainboard: K7SEM, ver 1.0
OS: Windows 2000 Pro
Original BIOS: Award Modular BIOS v6.00PG, K7SEM Ver:1.1 05/31/2001.
I just flashed up to Award...
sunslight
|
11-02-2003 10:09 PM
Jon Wichman | 3 | 36 |
|  | Well I have done it. In installing my CDROM into the case with the K7SEM already
installed, I managed somehow to push the CDROM edge right into...
Laura Prowicz
|
11-02-2003 07:39 PM
Jon Wichman | 2 | 33 |
|  | I am running ASUS A7V333 motherboard with Athlon XP 2100+. For some
stupid reason I decided to upgrade my BIOS. After upgrade the BIOS
reads only 128...
ps
|
11-02-2003 07:31 PM
Jon Wichman | 3 | 36 |
|  | I just installed the latest SIS chipset drivers for my K7S5A Pro
now it appears that my ATA controllers are going on the frizz.
Any know issues with...
Tod
|
11-02-2003 07:18 PM
Jon Wichman | 4 | 41 |
|  | Hi,
I have a system with the k7s5a, 1 gb of kingston pc133 dimm and windows xp
pro sp1. I have the following disks connected to the ide channels:
ide...
Th3L0rD
|
11-02-2003 07:12 PM
Jon Wichman | 10 | 57 |
|  | Hi -
I've got a problem I hope you all might help me figure out. About a
month ago I got a K7S5A PRO mainboard and an Athlon XP 2400+ and a
sonata...
Ben
|
11-02-2003 05:41 PM
Lars Forslin | 4 | 30 |
|  | PC is working perfectly stable, everything works at its best. BUT:
When I shut down or hibernate, I have to diconnect/ switch off
completely the...
Lutz Fehrle
|
11-02-2003 05:38 PM
Lars Forslin | 8 | 27 |
|  | Thanks everyone for the help in deciding on a video card.. As you can
see below, I went with the Sapphire 9600 Pro 128M.. I've read up...
Russ Chewning a.k.a. Pogue
|
11-02-2003 03:49 AM
Russ Chewning a.k.a. Pogue | 9 | 38 |
|  | Does anybody know where one can buy the K7VTA3 V7 mainboard? I can't
seem to find the V5 (which would suffice) or V7 version of this...
Mike Mastro
|
11-02-2003 02:51 AM
SLIM | 8 | 52 |
|  | This NG is full of posts about CMOS losses, cold boot probs , non-posting.
I'm in the look-out for a new cpu & mobo, and I'm going to give anything...
Ebodski
|
11-01-2003 07:03 PM
Shepİ | 12 | 57 |
|  | visit www.bioschips.webhop.net
For Replacement chips $15
re-flash of existing chip $8
iCE Flashing iNC
|
11-01-2003 02:10 PM
iCE Flashing iNC | 0 | 38 |
|  | Hi Group
I have a K7S5A board with a Athlon 1600+ CPU which has always worked like a
charm.
But recently I got a AGP MSI GeForce 4 with video-in...
John Doe
|
10-31-2003 05:13 PM
Slang | 1 | 30 |
|  | Hi all,
i have a k7vza v3.0, cause of my system freeze with radeon 9100 and
more than 128 MB (it's not cause of more than one stick, but with...
Flyzone
|
10-30-2003 04:52 PM
Flyzone | 0 | 29 |
|  | Want to Flash the BIOs on my K7S5A either with an Official update or a
HoneyX update.
Want a backup of my BIOs before I try this. Will any of the...
Toots
|
10-30-2003 04:15 PM
Toots | 10 | 71 |
|  | I'm very irritated cause of this motherboard!
It crash every 1-4hours!
1) was the third ram-stick that with the radeon it crashed my sistem
in 2-10...
Flyzone
|
10-30-2003 05:18 AM
Flyzone | 8 | 30 |
|  | Hi,
I recently purchase this motherboard.
Because I killed my Duron 850, I must change it.
The features report a compatibility up to Duron...
blob33@netcourrier.com
|
10-29-2003 12:42 PM | 2 | 32 |
|  | Here are my system specs:
K7S5A Pro MoBo
Athlon XP 1500+ Processor
Kingston 266/512Megs Pc2100 DDR (Coming in the mail)
Using on board sound for...
Russ Chewning a.k.a. Pogue
|
10-28-2003 08:31 AM
JimL | 3 | 34 |
|  | Hi,
the K7S5A PRO 5,0 should have the USB 2,0 ports in the ATX panel. If I plug
in there my external hard disk drive, I get the message that a...
Danko Cvijanovic
|
10-27-2003 09:39 AM
Danko Cvijanovic | 8 | 38 |
|  | What is the maximum capacity for a harddrive with the K7S5A.
Is it 120Gb or will a 200Gb also work full size.
Harrie Geerts
Harrie Geerts
|
10-26-2003 09:28 PM
Tod | 4 | 36 |
|  | Hallo,
mein K7SA5 sagt immer beim hochfahren, dass ich Einstellungen
durcheinander sind. Ich muss dann f2 drücken und dann geht es weiter.
Aber...
Peter Schuette
|
10-26-2003 07:07 PM
The TweakOholic | 7 | 41 |
|  | Hello there,
Some time ago I bought a cheapo mainboard, an ECS L7S7A2 rev.1.1
I use Windows98se.
In the pci-slots there are only a graphics card and...
Max M.
|
10-26-2003 02:02 PM
Shepİ | 4 | 33 |
|  | visit www.bioschips.webhop.net
For Replacement chips $15
re-flash of existing chip $8
iCE Flashing iNC
|
10-26-2003 10:14 AM
iCE Flashing iNC | 0 | 34 |
|  | Hi,
I'm looking for an inexpensive board that supports the barton core XP CPU,
would like to have the ability to overclock it. Is there such an...
Bitsbucket
|
10-26-2003 10:07 AM
Kyle Brant | 2 | 33 |
|  | Using W2KP with 256MB, a 1500+ Athlon, ATI AIW RAD 8500 w/128MB with
Firewire and Promise 133 PCI cards.
I pop in a DVD and the ATI player starts up...
Eric Wolfe
|
10-25-2003 11:46 PM
Eric Wolfe | 3 | 35 |
|  | I need help with thruput on my 4 computer LAN.
I just bought a 10/100mhz router and the K7S5A Pro with 2200 athlon.
I expected my LAN transfers...
JimL
|
10-25-2003 08:32 PM
JT | 13 | 53 |
|  | I don't know how Fry's can sell this as a combo, since that assumes the MB
and processor are compatible.
Bartons run at 166 FSB and the K7VTA3 will...
mrperry2u
|
10-25-2003 10:26 AM
mrperry2u | 3 | 32 |
|  | I've got a P6STM motherboard and I am quite happy with it so far. It was
very cheap, but did not include the I/O template. Does anybody have and...
dym
|
10-24-2003 08:31 PM
Bitsbucket | 3 | 37 |
|  | I have tried for the last few days to install Windows XP Pro. on a
computer with ECS 648 FX-A S478 mother board. I have 512 MB DDR
PC3200. I have...
olsenbanden2
|
10-24-2003 07:26 PM
Bitsbucket | 2 | 32 |
|  | Hello,
my K7S5A with Lan/Sound doesn´t play sounds during Games. Win98-Sounds
and mp3´s are still OK, but when I start games, that...
Horst Kalevar
|
10-24-2003 02:20 PM
Shepİ | 2 | 36 |
|  | What is the difference K7S6A rev 1.0 et rev 1.0a?
my k7s6a is compatible with atlon XP 0.13m . my motherboard is rev 1.0 ou
1.0a
what is the...
Didier Toutiras
|
10-24-2003 08:35 AM
Didier Toutiras | 0 | 58 |
|  | I've been using this board for around 2 years, only using it for a
couple of hours a week. I then built a new pc, and didn't use this one
for a...
Gary Lightfoot
|
10-23-2003 09:40 PM
Kyle Brant | 6 | 28 |
|  | I haven't got onboard LAN with my K7S5A Pro, and I'm having a few problems
with my Netgear FA311 NIC. I've also read in other places about...
Cuzman
|
10-23-2003 02:10 PM
P and J | 8 | 43 |
|  | Bought it.. love it.. I've built many systems from many mobo mfr's
(prolly 45+ by now) and this all in 1 is truly sweet. It's no speed
demon but for...
DW
|
10-22-2003 05:19 PM
DW | 0 | 43 |
|  | .... what brand of AV is installed on the mother board, its set to disable
but if its any good id like to try it?
andrew
|
10-21-2003 10:14 PM
JT | 3 | 37 |
|  | Hi,
I would like to update upgrade my bios from 3.b to 3.d so that I can install
an Athlon XP 2400+ in my system. I read through the instructions...
Phil
|
10-21-2003 05:57 PM
Bitsbucket | 2 | 33 |
|  | How common are AGP video cards that are not compliant with this
motherboard.
Do you get smoke if you stick one in that is other than 1.5V?
I'm...
JimL
|
10-21-2003 01:50 AM
larrymoencurly | 5 | 29 |
|  | Hello, to anyone who's reading this!
I got a question, I want to buy the 2600xp barton but I don't know if I find
much difference between the 2000xp...
RA
|
10-20-2003 03:44 PM
Luca Andena | 1 | 37 |