I am trying to upgrade my gateway and the powersupply is only 200w, the powercable is not long enough. I have only agp 2x cards. i hardwire power...

Joseph

10-19-2003 10:27 AM
Joseph

I was just checking through the unnoficial K7S5A Motherboard Guide v1.2f, and it says the following with regards to the *Graphic Win Size*...

Cuzman

10-18-2003 12:34 PM
Shep©

<jdonhue (AT) wans (DOT) net> wrote in message news:

Buffalo

10-18-2003 10:40 AM
Buffalo

I just built a new PC with a 648FX-A ECS mobo, using a P4 2.4 ghz processor, two 256mb 400ddr RAM, a 350 watt power supply, 80 gig WD Harddrive, ATI...

Baloney

10-17-2003 10:56 PM
Jasper Tan

my brother has a k7VZA ver3.0 mobo and is getting stability problems. it locks up when cold booting but will settle down after a while. still...

Sleepy Ben

10-17-2003 09:40 AM
Sleepy Ben

Has anyone experienced this problem? K7S5A Pro motherboard no longer recognizes the hard drive but does see my CD drive. I can boot the machine off a...

Just Another User

10-16-2003 10:51 PM
Just Another User

I am currently shopping for a reasonably performing graphics card. I am not a gamer, but I do lots of video editing. There are TONS of cards that...

Silence Seeker

10-16-2003 06:36 PM
Shep©

I have the ECS L7S7A2 motherboard with windowsxp. I install the Ic card reader software and its hooked up right but when i go to my explorer I...

amsjsj

10-16-2003 11:07 AM
bompy

I know, its a notebook, not a mainboard. Whare can I buy the Wifi 802.11b +v90 modem MINIPCI card that should fit inside, according ECS specs...

FF

10-16-2003 04:16 AM
FF

Hi, I have a system with the k7s5a, 1 gb of kingston pc133 dimm and windows xp pro sp1. I have the following disks connected to the ide channels: ide...

Th3L0rD

10-16-2003 02:27 AM
Th3L0rD

(K7S5A PRO) When I boot my computer, the DVD and burner on the secondary ATA controller are not even seen by the bios (everything set for auto). And...

Tod

10-15-2003 03:48 PM
Tod

I borrowed a buddies external dvdr drive for a few days but I can't get it to work. It's incased in a Vipower ide-usb 2.0 case and when I plug it...

quiksand

10-14-2003 05:41 PM
Shep©

Product-Name : K7S7AG Model Version : PCB 1.5 BIOS Version : 02/19/2003 Installed OS : Windows XP Home Edition installed components: Kingston Memory...

Peter Wieners

10-14-2003 11:31 AM
Peter Wieners

I have just bought one of these boards and I have a few questions about it: 1) How do you know what version it is, because i'veread there are about...

Ross

10-13-2003 07:30 PM
Brian Campbell

Where are some websires with help on bios setttings for the K7S5A Pro. I want to get the best performance from my Win XP.

Tod

10-12-2003 06:53 PM
Luca Andena

Does anybody know if the K7SEM mobo can support the new 1600 Durons? If not what is the fastest XP processor this mob can handle!

Wugga

10-12-2003 01:12 PM
Michael Wechter

I'd say check your cables and make certain you plugged things in right and did not pull any other cables loose. -- Best regards, Kyle tired of spam,...

Kyle Brant

10-12-2003 09:33 AM
Scott

Hi, I have a K7S6A and when I try to use a LAN card (FA330), the system doesn't start fine each time, bios seems stopped. When it's Ok, I may have...

Alain DEMOY

10-11-2003 02:37 PM
Alain DEMOY

Trying to find a overclocking bios for a pcchips m825lmu. This board is identical to the ECS K7VMM (or so I have been told). I have the 3.5...

Colin McDonald

10-11-2003 11:59 AM
Colin McDonald

On Sun, 5 Oct 2003 18:38:48 +0000 (UTC), WJ <wcj (AT) askme (DOT) net> wrote: there are modified bios' out for that board, i think one is...

Steve Vai

10-11-2003 03:24 AM
Wblane

Hi, I've looked on the ECS site, but don't really understand the processor support table. I have a K7Vmm+ that I want to upgrade the process. I...

Scott

10-10-2003 05:29 PM
Scott

Hi Further to my earlier post about my own machine. I've got it running nearly okay. Its on honeyx 021029 and seems to post, but no matter how many...

Ebodski

10-10-2003 03:11 PM
Shep©

It picked up on of these at http://www.supertalentflash.com. Anyone able to get the K7S5A to boot a flash drive? If so what'd you guys do to make it...

whateva@aol.com

10-10-2003 03:30 AM
whateva@aol.com

I have the ECS L7S7A2 motherboard with windowsxp. I install the card reader software and its hooked up wirhgt but when i go to my explorer I can...

amsjsj

10-09-2003 06:40 PM
amsjsj

I am starting to think God hates me. Everytime I try to set my speeds to 133/133. Everything seems fine. Then I will be doing something in XP like...

Quiksand

10-09-2003 06:25 PM
Shep©

My K7S5A with SiS 900 will not conenct to my network at 100Mbs. When in auto-config, it negotiates 10Mbs. When I force it to 100Mbs, it dies. The...

Colin McFadyen

10-09-2003 02:28 PM
jaster

On my K7S5A Pro v 5.0, my relatively old maxtor is an ultraATA/66 drive but I don't see that as I go into the cmos. Any suggestion on how I might...

JimL

10-09-2003 02:05 PM
Shep©

My system is acting like a troubled car in that takes me dozens of restarts in order to get it running. It's setup is: Windows 98SE OS 2 Diamondmax...

scruffingg

10-09-2003 05:01 AM
Mr. Slow

Hi Eliters My Wifes PC System Model K7S5A V1 Processor AMD 1200Athlon(tm) Processor AuthenticAMD O/C Honey X ~1284 Mhz IRQ 5 NVIDIA GeForce2 MX/MX...

Anne Horslett

10-08-2003 10:44 PM
SLIM

Like the title says really. Switch on and get continuous short beeps of same tone. Dried different memory and (of course) resetting CMOS, but to no...

Li'l ol' me

10-08-2003 07:42 PM
Li'l ol' me

I have a ver 3.0 K7S5A motherboard with an ATA 133 60G hard disk on IDE0 and an ATA 133 30G hard disk along with CDRW on IDE1. The...

Milan Fait

10-07-2003 07:46 PM
Milan Fait

I have the ECS L7S7A2 motherboard with windowsxp. I install the card reader software and its hooked up wirhgt but when i go to my explorer I can...

amsjsj

10-07-2003 06:21 PM
amsjsj

I installed a Rocketraid 133 adapter (HPT372A chip) with two Maxtor 80 GB HDs. I created a RAID-1 array duplicating content of one HD onto the...

Luca Andena

10-07-2003 05:14 PM
Luca Andena

...okay, here we go. In March 02 I upgraded my rig to a K7S5A v1 , new ATX case, 300w PSU , XP1700+cpu , 256mb PC133, 60gb 7200rpm HDD , GF3 Ti200...

Ebodski

10-07-2003 04:59 PM
Buffalo

i've been asked if a computer will accept a 160gb hard disk. it currently has a 60gig. It is a pentium III mobo with a via apollo 133a chipset. ...

Deathwalker

10-07-2003 02:25 PM
Shep©

For some reason my last post from Google did not make it so here I go again. I have a K75SA MoBo that is about 2 years old and I cannot find...

Bob Jakamarra Fletcher

10-07-2003 04:00 AM
Bob Jakamarra Fletcher

Hello all, I've got a problem with a bunch of k7vza rev3 boards and some pc133 512MB (yes it's high density stuff) memory modules. Now the...

Tim Leger

10-06-2003 01:41 PM
Tim Leger

Hi guys, can anyone help with this problem. I've just installed a PCI V90 56k modem, installed drivers and everyting seemed fine, but whenever I try...

Foglerman

10-05-2003 04:13 PM
Luca Andena

Hi All, I'm running Midtown Madness 2 on a machine with a K7S5A Pro mobo, XP 1600+ cpu, 512 mb PC 2700 DDR memory, an ATI Rage Fury Pro agp video...

HarvB

10-05-2003 01:38 PM
Shep©

When I connect a Silicon Image CMD049 ide controller the system doesn't boot and, as soon as I remove the controller, everything works fine: how can...

Mr. Jingle

10-05-2003 04:35 AM
Mr. Jingle

I own a K7SEM v1. with newest BIOS and sis730S chipset. I'm a little confused as to what some of the Driver updates are and how they will affect my...

The Bad Momber

10-05-2003 04:00 AM
Michael Wechter

Can anybody point me to a source for the lan connector cable for the k7sem ver 1.0 motherboard? TIA, Ray

Ray Freed

10-04-2003 10:30 PM
Ray Freed

I have just assembled a system using a L7S7A2 board (3/13/03 bios), an Athlon XP 2200+ cpu and an Antec 400W psu. I have a couple of questions: 1)...

Greg

10-04-2003 10:25 PM
JimL

I have been pulling my hair out with the problem I have having with my K75SA MoBo. I recently decided to upgrade my system. I now run an XP 2000+...

Bob Jakamarra Fletcher

10-04-2003 06:09 PM
Mr. Slow

test news -- Silvia Sex Fotos http://www.personal.able.es/ensoriano

silvia@onairos.com

10-04-2003 08:47 AM
silvia@onairos.com

This week, the PSU of my PC with a K7VTA3 V5 board with XP1800+ failed suddenly. After replacing it, my bios settings (or at least the time date) are...

Paul

10-03-2003 05:22 PM
Shep©

I would like to install a new hard disk (Seagate 120 Go) in my configuration (K7S5AL ver1.1 and WinXP Pro). Is it possible. I have never flash the...

Yannick LE SCIELLOUR

10-03-2003 05:22 PM
Shep©

No problem running a 8500le-64ddr. I only have one cpu. I have fast write disabled. "Sandman Leviathan" <Someone (AT) Nowhere (DOT) Com> wrote

duke

10-03-2003 07:43 AM
biggs

O.K. so I'm not too bright? Previous post I said I have an AMD XP2200 when in fact I have an AMD XP 2000 and PC2100 memory so what should the...

Xeno Chauvin

10-03-2003 12:44 AM
Tod

Hello, I have been searching all over the newsgroups and on Google to find the answer to this question. I am trying to update the BIOS of an old...

Christian von Krogh

10-02-2003 05:08 PM
Daniele Gratteri