Anyone know where one of these are? -- Want the ultimate in free OTA SD/HDTV Recorder? http://mythtv.org http://mysettopbox.tv/knoppmyth.html Usenet...

Wes Newell

02-03-2006 08:27 AM
Wes Newell

I have a socket 754 Athlon 64 3400+ (Clawhammer) CPU waiting for a new home. Does anyone have any thoughts about the 755-A2...

Carl C. Jackson

01-29-2006 10:24 PM
Paul C

PCB rev 1.1 and BIOS 1.1f running XP Professional. 640 MB PC133 SDRAM. I've seen a discussion from early this year about upgrading and several of...

Olof F

01-27-2006 06:31 AM
Olof F

I was trying to add 128MB RAM to this board that only had 32MB RAM and now the system won't boot up and I can't figure what happened! I...

ceddawg

01-23-2006 02:32 AM
ceddawg

Hi, Thanks in advance to anyone who can help. I've been trying without success to install Windows XP SP1 onto a Maxtor 250gb SATA hd, hooked up to...

Jason Hsu

01-22-2006 07:15 PM
tcsenter

My PC powers ON when telephone Rings. Any advice on the Bios setting to configure to stop that?

RS

01-21-2006 10:20 AM
tcsenter

ECS L4VXA2 P-4 socket 478 / 533fsb / 512K 512MB PC2700 DDR Thanks so very much for reading. I have read up on the ECS L4VXA2 and I know it causes...

vois2

01-15-2006 12:08 AM
Kawosa

That's it in a nutshell. Single-sided 1024MB DIMMs are hard to find and probably much more expensive at this time (I actually have not seen any...

Big Sky

01-14-2006 06:59 AM
tcsenter

my old motherboard had a boot option by pressing f8 to bring up a boot menu so I can choose which hardrive to boot from (or floppy, cd,). this...

vinny

01-12-2006 10:05 PM
vinny

That's a nice little program...and it's showing me the same results as Belarc! Thanks for the link. "uddarts" <UseLinkToEmail (AT) www (DOT)...

Ken_B

01-09-2006 07:43 PM
Ken_B

Hello My son gave me a Nvidia GE force 5200 video card to install in my other son's K7SEM motherboard. Based on the AMI BIOS I believe it is...

sdgardner1954@sbcglobal.net

01-09-2006 01:51 AM
Brian Campbell

I have an old ecs ks75a with a universal agp1.0 (2x/4x) slot (3.3v). Have been running an old PCI video card. No problems. Have an extra...

magad

01-08-2006 04:06 PM
magad

Hi there, We have a K7SOM+ V5.2A motherboard. It's very slow, mainly due to the onboard graphics, and so I am trying to add a PCI graphics card....

moonklash

12-30-2005 07:01 AM
moonklash

I'm the owner of a K7S5A (Rev.1.0) motherboard.I'd want to know if this motherboard supports USB 2.0 (or the old 1.1) ,I'm not able to understand...

Valerius

12-30-2005 12:36 AM
uddarts

Hello I bought a 1.8ghz duron, my pc is running a little bet slow. the believe there are some bios to improve the speed. does anyone know where i can...

jcharth@hotmail.com

12-27-2005 08:14 PM
ALE

I've followed the manual on how to install an AGP card. I set the BIOS Video Init parameter to Onboard/AGP as the manual states (the other option is...

Flyboy604

12-24-2005 01:13 AM
Flyboy604

I've built a system using the ECS KT600A motherboard XP2500 CPU, and Win98SE (that's what he wanted) for my brother in law, and all is okay except...

khobar

12-17-2005 11:58 AM
khobar

I had a system given to me today, an ECS L4S5MG3/GX+(5.0) mobo w/2.66 processor, 512mb DDR333 RAM. Unfortunately, it powers down at the beginning of...

David L McMurray

12-14-2005 11:03 AM
Ron Gibson

Hi NG. I have a KT133A ECS. The mighty K7VZA Rev.3.0. Is it possible to drive a AMD Athlon XP "Barton" in this MB? If so, as I heard from other...

Daniel Mandic

12-13-2005 02:37 PM
uddarts

Have an ECS 848P-A7 V1.0 (socket 775) Mother Board with Pentium 520 CPU that will not run the Power On Self Test (POST), or allow me to edit the BIOS...

ref21421

12-12-2005 01:22 PM
ref21421

Hi, I was just wondering why the ECS EliteGroup L4VXA2 motherboard is selling for so little ($15 to $20). This is incredibly low compared to...

TenPercent

12-12-2005 08:25 AM
Sherman

My mobo case speaker connector has an odd three wire connector on the mobo. Pin 1: Signal (+) Pin 2: Not connected Pin 3: Ground (-) Pin 4:...

Ron Gibson

12-10-2005 01:35 PM
Ron Gibson

i just installed a new mobo (Elitegroup PF21 Extreme) and i got the BIOS set up to where it boots from the HDD and all, but when i get to the WinXP...

craiggoetz

12-10-2005 10:31 AM
Guy

Can any help, i got P4VMM2 motherboard with XP pro loaded. The PS/2 keyboard and mouse just stop working for no reason. I tried usb keyboard and...

Vern

12-09-2005 05:55 AM
Vern

Well after running this mobo with a AMD K7 and 2000 Pro for a couple of years, I decided to go against my very own rule of "if it's not broke don't...

gatorcellman@yahoo.com

12-09-2005 04:03 AM
Kyle

I am running the following memory sticks in my ECS PVMM2 V 5.a motheboard: Ultra 512MB PC3200 DDR 400MHz CL3 . Can anyone tell me if my motherboard ...

Sam

12-08-2005 01:32 AM
Sam

I'm trying to figure out why my system won't shut down or reboot. System is an ECS NF4-A939 with an Athlon X2 3800+, 1GB dual-channel DDR400, mix...

khobar

12-03-2005 04:55 PM
khobar

Has anyone tried to run both SATA and PATA (IDE) hard drives at the same time on an ECS NFORCE4-A939 motherboard?

Perry Webb

12-01-2005 11:49 PM
khobar

Has anyone tried to run SATA and PATA (IDE) hard drives on an ECS K8T890-A motherboard at the same time?

Perry Webb

11-23-2005 03:15 PM
Perry Webb

Any oppinions on which motherboard is better an ECS 755-A2 with a SIS 755 chipset or an ECS NFORCE3-A with an nVidia chipset?

Perry Webb

11-23-2005 10:52 AM
Perry Webb

Hello, Thanks in advance for any wisdom or suggestions - I am sorry for such a long post. I own (2) K7S5A (Rev 3.1) based systems that have...

David J. Pittella

11-20-2005 01:30 PM
robm

I just installed this board. If I take a known working WinXP install it reboots right after it loads the white bar across the bottom, I do a fresh...

Sweathog

11-20-2005 02:36 AM
uddarts

:question: :question: :question: hello...I want give this motherboard to my girlfriend and don`t kno if her processor AMD Sempron 2500+ 64bit...

vranikx

11-19-2005 03:45 AM
Sweathog

ECS tech finally got it through to me that there is a hardware issue --you can't have a primary IDE and a SATA? so i disabled the primary channel...

Pete Rynas

11-19-2005 12:28 AM
Pete Rynas

Duron 1.3ghz and ECS K7VMM+ MB Win XP home new install. XP will act like its overclocked. For example the sys tray clock will run really really...

Scrambler

11-11-2005 09:34 AM
wild man

no matter whay i do the board will not recognize a SATA drive in any of the enabled choices in the bios or by itself with primsary and secondary...

Pete Rynas

11-09-2005 09:07 PM
tcsenter

I am facing a problem with my ESC PT800CE-A system. I have a pentium 4 3.2GHz on it with 1GB of Ram. Lately it started to act wierd. I started...

AirBorne

11-09-2005 03:07 PM
robm

Hello, I found this RC410L/800-M2 ECS mobo inside my new Acer computer. It came without any software (everything factory-installed). I have...

Ladussard

11-05-2005 01:19 PM
Ladussard

my desktop freezes at boot.

czerbes

11-04-2005 02:37 AM
uddarts

i have an 848P-A ECS motherboard and i cannot get it to see the SATA hard drive?? i have 2 IDE connected to IDE 1 and IDE 2 , @ cd rom/dvd on...

Pete Rynas

11-03-2005 07:42 PM
Pete Rynas

Fry's has some memory on sale. I'd like to buy a couple of 512mb chips but am worried about compatibility. Suggestions?

Sherman

11-01-2005 10:06 AM
Sherman

I have an ECS 945P-A mb with the latest bios, an Intel 830D processor and a matched pair of Corsair (1GB, 512x2) 5400C4Pro DDR2 memory capable of...

diskman50@hotmail.com

11-01-2005 09:02 AM
diskman50@hotmail.com

Any more ideas on my recently posted SATA problem?? thank you ECS TECH provided limited info

Pete Rynas

10-29-2005 10:34 AM
Pete Rynas

I am wanting to replace my secondary internal hard drive. I found a Maxtor 300GB ATA/133 drive and was wondering if this would work on the K7S5A...

Robert Stewart

10-26-2005 07:20 PM
Robert Stewart

the connection light on my router stays lit for the port the k7s5a LAN connection is connected even after computer is turned off ????? for other...

robm

10-24-2005 07:16 AM
Sherman

Will high density pc3200,such as 128x4 work on this board?Has the VIA chipsets.Can anyone recommend some memory? I would like to run at least 1gb...

kmez

10-21-2005 05:37 PM
kmez

"flipper" <flipper (AT) fish (DOT) net> wrote I forgot so much about the celeron designations. I remember having a 300a and it would not OC to 450....

apu

10-20-2005 03:18 PM
Buffalo

I have a 1.8 GP4 Celeron and 700+MB of Ram in this board and I was wondering what is the fastes CPU (NON OVERCLOCKED) this board...

Sam

10-18-2005 10:47 PM
tcsenter

"flipper" <flipper (AT) fish (DOT) net> wrote is how the so called 'hi density' memory modules are commonly made and how they get called 'hi...

mike99

10-18-2005 10:09 PM
Tim

this sounds similar to problem i experienced with my K7S5A rev 3 mobo ran great for 2-3 years then lock ups began, increasing in frequency daily ...

robm

10-18-2005 11:45 AM
robm