"flipper" <flipper (AT) fish (DOT) net> wrote is how the so called 'hi density' memory modules are commonly made and how they get called 'hi...

mike99

10-18-2005 09:09 PM
Tim

this sounds similar to problem i experienced with my K7S5A rev 3 mobo ran great for 2-3 years then lock ups began, increasing in frequency daily ...

robm

10-18-2005 10:45 AM
robm

Hi, As stated a I have a ECS K7S5A ver 1.0 which I am trying to get working. I seem to have all of the rest of the board working but the sound. I...

tiyogi

10-12-2005 12:35 PM
tiyogi

Is it at all possible to OC a K7S5A and a 1800+ Tbred. the board is not the PRO. I Have looked in the newsgroups here and it doesn't seem very...

Richard Hall

10-12-2005 06:31 AM
Charles Leblanc

doesn't have this newsgroup jumpin You boys short of jingle, or your K7S5A still has plenty of bang? ;)

BowTie

10-09-2005 08:40 PM
Rotes Sapiens

The ECS motherboards i have had in the past were able to turn the pc on by simply pressing a key on the keyboard. There has always been a setting in...

ND

10-08-2005 07:04 PM
ND

Hi Rose Weather...

Davidy

10-07-2005 07:48 PM
Davidy

Have a 755-A2 tried to install a new WD120gig sata hd on a system with a pata hd. I tried disconnecting the existing 160 Maxtor parallel and doing a...

Davidy

10-06-2005 02:04 AM
tcsenter

Hi. I'm trying to connect to a Toshiba 2200 cable modem. When I connect it to the Ethernet socket, the lights are on correctly but ipconfig/all tells...

Joel Rubin

09-29-2005 02:32 PM
Ian Shef

Hi there, I found this site that suggest the closing of bridge L5(1) to unlock the multiplier of the Athlon XP-M I could "upgrade" my 14X143mhz...

Charles Leblanc

09-27-2005 06:51 AM
Charles Leblanc

I had similar problem with ECS PT800CE-A. Never could get it to boot. Fry's Elec. tested it and it was dead. Got an exchange from ECS since it was...

sweldon

09-26-2005 11:45 AM
sweldon

Just posting this here by way of reference, in case anyone else comes across the problem using a similar ide configuration. Recently built a system...

Stephen Howard

09-26-2005 06:25 AM
Stephen Howard

I am having a problem restarting my PC. PC boots perfectly from off but whenever i try to restart (no power down) it fails. It passes the BIOS...

Martin

09-23-2005 08:30 PM
Robert Stewart

I have a k7s5a pro, want to go bigger on hd, now has 60g, how much bigger can go. thanks

joelburgon

09-18-2005 05:40 PM
joelburgon

flipper wrote: same k7s5a albert # cat /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 6 model :...

Trashdog

09-18-2005 04:54 PM
TwoTired

My old K7VMA board died so I replaced it with a K7S5A Pro board. The board has been running fine for almost 2 years now. However, every since...

Robert Stewart

09-16-2005 07:23 PM
Robert Stewart

I am looking to replace my Radeon9000pro card with something that could run DOOM3. System: K7S5A with Honey-X bios Mobile Athlon @2000mhz DDR 333...

Charles Leblanc

09-15-2005 01:57 PM
tod

ECS P4VMM2 ver.1.3 - I lost one electrolytic capacitor, only two metal leads still there, the cap is gone and I can’t find it. Can someone help me to...

Johnny

09-14-2005 03:44 PM
Johnny

hello i have athlon 64 2800+@3200+ clawhammer socket 754, 2x512 APACE PC3200 UNB DDRAM, Sapphire Radeon 9800SE with 8 pipelines activate AGP,...

vranikx

09-14-2005 01:03 AM
Brian Campbell

Hey all, I am about to make my final decision and go for the KN1. I was hoping to find out more about the sata for making a simple harddrive...

troy

09-11-2005 02:44 PM
madmax

Using the Everest software I found to have a 62-0100-001131-00101111-122804-SIS741$M863GV50_RELEASE 12/28/2004 motherboard, but I am having trouble...

Teddy Bear

09-07-2005 02:14 PM
tcsenter

Ive just put together my new system: Elitegroup 755-A2 MB Ge force 5500 fx 256MB Video card Western digital 250GB HD unfortunately after the...

Rob-alicious

09-07-2005 11:54 AM
Buffalo

Got a new ECS NFORCE4 A-939 board the other day, it was basically free with the Athlon 64 chip so why not try it out. My main problem with it is, it...

pete

09-06-2005 12:39 PM
pete

hello. how good is this motherboard (ECS NFORCE3-A) for overclocking?

vranikx

09-04-2005 04:33 AM
vranikx

Hi all, Anyone know where I can find info about this mobo? And what the max CPU is, u can put in it? ECS - VT8367-8233 - AA280 - KT266 -...

Paul

09-01-2005 04:51 AM
Paul

I continue to have weird problems that seem to indicate that this board is not reliable. Hoping someone can give me pointers. I had a Thunderbird...

Anonymous

09-01-2005 01:39 AM
uddarts

I just installed a septron 2200 on this board set with the jumper at 133. It booted up fine and is running at 30c. Can I clock it up a...

Brian

08-30-2005 04:02 AM
BigDog

I purchased a 80GB SATA HD and a SATA controller card for my PC. I can see the SATA HD as drive D in WinXP, but if I try to make it my boot disk the...

bassplyr1964

08-30-2005 03:55 AM
BigDog

According to ECS support FAQ for K7SEM, versions 1.x through 3.0A support 48-bit LBA (up to 250GB) with the latest BIOS. Interestingly, ECS states...

tcsenter

08-30-2005 12:16 AM
tcsenter

I have just built a system using an Elite PF21 Extreme Motherboard, one of Elite's high end products. I am using it with an Intel Pentium 4...

Alasdair Baxter

08-28-2005 05:35 AM
tcsenter

Calling anyone and everyone who may have one or more systems built using the PC Chips M811LU V3.1 or Syntax SV266AD. I've used several of these...

tcsenter

08-28-2005 04:31 AM
tcsenter

I need some assistance with this. I had the K7VTA3 .8c/6 running with the latest BIOS 6C. I had an Athlon 1.333 MHz processor running fine. Very...

Anonymous

08-26-2005 07:02 AM
tcsenter

"OSAL" wrote: i’d look to your psu first. try posting with just the vid card(5500), 1 stick of memory and hs/fan. be sure to clear the...

uddarts

08-24-2005 11:38 PM
uddarts

Hi, I came back from the weekend to find a dead computer. Had been hearning the CPU fan and meaning to check it out (replaced it a couple...

miapjp@chartermi.net

08-24-2005 12:15 AM
Buffalo

No autoplay, no install, no nothing. I have manually gone into the USB folder (while using WIN 98SE) and extracting the driver I need for one of...

noizyme

08-21-2005 11:36 AM
tcsenter

Just curious which of the drivers to install for WIN 98SE. I can se a lot of different manufacturers (?) of the drivers but no manual ha told me...

noizyme

08-21-2005 08:13 AM
tod

They use to be junk. Have they improved and gotten better than Soyo Dragon boards, which I current have?

DrB

08-13-2005 11:07 PM
DrB

for the AMD-64, which I prefer, looking for what would the difference before I upgrade my computers to the AMD-64. Can anyone comment on the pros...

DrB

08-13-2005 11:44 AM
Jim

Noticed that Fry's has ECS boards packaged with the AMD-64 and wondered if anyone can comment on the best for the buck.

DrB

08-13-2005 05:30 AM
Jim

755-A2 motherboard 1 Sata drive 1 DVD RW drive Should the DVD drive be installed in IDE2 or IDE1? Does it matter? I presume the DVD should be set...

Jim

08-11-2005 12:57 PM
Jim

I have the subject motherboard with a Palomino Core 1600+ CPU. 2x256 MB memory as DIMMs. 40GB HDD, DVD/CD, generic PCI sound card and Abit Siluro...

PB

08-10-2005 10:55 PM
robm

Do you currently have an operating system installed, or are you trying to install an operating system? In either case, the driver you need can be...

tcsenter

08-08-2005 05:26 PM
tcsenter

When I bought this board about six months ago there was an entry in the BIOS under PCI devices to enable/disable the on-board SATA controller. as I...

Mick Sitton

08-08-2005 03:55 PM
tcsenter

I've just got hold of a 755A (1.0a), and the packaging and manual are amended with stickers stating that only DDR333 is supported (!?). So does that...

Cuzman

08-08-2005 05:28 AM
tcsenter

Got one of these on sale at Frys over a year ago and just was able to get around to building a system with it. However, it doesnt seem to get power....

RiverLake Farms

08-06-2005 09:02 AM
RiverLake Farms

Hello, I have an ECS K7S5A Pro (5.0) (SiS 735 Chipset) motherboard with 640 MB of DDR (512 and 128) and AMD 2600+ processor. Bios version is...

jsb123

08-04-2005 07:36 PM
jsb123

I already have two 256MB SD-RAMs in my motherboard Elitegroup ECS K7S5A Pro rev5.0 working. Everthing is fine. Now I wanted to extend the memory up...

Thomas Stein

08-04-2005 01:17 AM
Martin

I inherited this mobo+CPU and need to ask some questions please. The CPU is axda2200dkv3c : Athlon XP 2200 1.8GHz 266 MHz FSB OEM, I believe. That...

fred

07-30-2005 07:06 PM
Cuzman

I have this board and am trying to (of course) build a computer. It does fire up, but I get no video. The card is fine, I have used it on other...

Larry R Harrison Jr

07-28-2005 02:43 PM
Buffalo

hi all this is my first post here and i am not a hardware guru so please forgive me if this is a really dumb question i have an old system AMD 1600+,...

faddy

07-27-2005 11:35 PM
faddy