| | Rating Thread /
Thread Starter | Last Post  | Replies | Views |
 |  | how good is this motherboard?
vinny
|
07-15-2005 04:18 AM
vinny  | 0 | 85 |
| | | FLASH and BIOS Needed looked all-over. . . need HELP plz thx
ECS P4VMM2 v1.0 MAINBOARD BIOS Upgrade is
what I have now,
Mainboard : ECS...
Motorhead
|
07-09-2005 03:36 AM
darklock | 1 | 84 |
| | | Has anyone here ever setup an ECS 755-A2 with dual SATA drives in a
RAID-0 configuration? I tried to to just that using 2 Seagate 160G SATA
drives. I...
cagliostro@my-deja.com
|
07-07-2005 06:17 PM
cagliostro@my-deja.com | 0 | 109 |
| | | I'm running my K7VTA3 v8.0 with a Sempron 3000+ and Win2000 Pro. While
investigating a problem with games freezing up (eventually require a...
Big Sky
|
07-07-2005 03:10 AM
Big Sky | 1 | 61 |
| | | Hi all
wich is the highest ATHLON XP o DURON K7 process. freq. that
motherboard ECS K7S6A can support without overclocking ??
Paviel
paviel
|
07-05-2005 12:04 PM
Brian Campbell | 1 | 65 |
| | | how is the quality of the on board realtek sound you find on ecs and other
mb compared to a sounblaster live sound card
thanks
vinny
vinny
|
07-05-2005 01:19 AM
Kyle | 2 | 90 |
| | | Hi All,
Built my wife a box with the above motherboard and XP Pro SP2 and
everything works fine except reading CF cards. She has a Nikon...
Diogenes
|
07-04-2005 08:11 PM
robm | 1 | 75 |
| | | Hello all,
I bought a computer with P4VMM2 motherboard one and half years ago. It
worked just ok until last weekend and when my son turned on the AC...
Jack
|
07-04-2005 04:06 PM
ahmed_sayad2000 | 2 | 88 |
| | | I just bought a ECS 848-A7 Mother board and a Pent 3Ghz processor.
Everything powers up correctly and I can get to the BIOS setup. The problem
I am...
Terry Locke
|
07-03-2005 02:38 PM
Brian | 1 | 84 |
| | | does anyone know if the ECS KM400-M2 3.0 Socket A motherboard can handle a
athlon xp 2800 or 3000 (barton core and 333 on fsb) I can get both at...
vinny
|
07-02-2005 03:35 PM
uddarts | 2 | 73 |
| | | Hi
I've done a google on this but didn't find much of use.
Almost 2 years old and until now trouble free. This a rev 3 board.
It has started locking...
Paddy
|
06-29-2005 09:02 PM
robm | 5 | 59 |
| | | K7VTA3 with USB2 PCI Card.
ext. 300 GB Harddrive don't work
at my PCI Card for USB2
With USB1 connected the HD works fine.
Please Help .......
Joachim Heier
|
06-28-2005 01:42 AM
larry moe 'n curly | 2 | 64 |
| | | I have four k7s5a pro motherboards with a variety of Athlons.
In the "cpu pnp setup" page in the BIOS there are various cpu and memory
settings...
Joel Mosher
|
06-27-2005 02:41 PM
Daniele Gratteri | 1 | 63 |
| | | HotBelgo <none (AT) telenet (DOT) be> wrote in...
Kawosa
|
06-17-2005 06:34 AM
Michael Mantz | 1 | 64 |
| | | Hello,
I 've bought a mainboard, a K7S5A version 3.1.
The mainboard manual says that the agp-slot is version 2.0 and
suitable for a agp 4x...
mmiserus@xs4all.nl.invalid
|
06-16-2005 03:07 PM
mmiserus@xs4all.nl.invalid | 0 | 80 |
| | | Hallo,
Ik heb van iemand een mobo'tje overgenomen, een K7S5A versie 3.1.
In het mobo-boekje staat dat het een agp-slot versie 2.0 is en
geschikt...
mmiserus@xs4all.nl.invalid
|
06-16-2005 10:16 AM
mmiserus@xs4all.nl.invalid | 0 | 59 |
| | | I wonder if, somehow, I've nuked my mainboard's USB2.0 function with the
USB1.x function in working order? I'll try to walk through what I did :
1....
Alex Quant
|
06-16-2005 04:38 AM
Alex Quant | 3 | 70 |
| | | I recently bought ECS PT800CE-A and have installed the motherboard
with P4 3.2GHz Prescott (FSB800) CPU. Everything is running smoothly.
Windows XP...
AJ
|
06-05-2005 01:01 PM
AJ | 0 | 66 |
| | | Just built a K7VTA3 Rev6. PC 2700 Mem. Althon XP ... I am at home and
this box is at the office...so I can not recall exact processor ...
266...
David Sontag
|
06-01-2005 09:09 PM
David Sontag | 2 | 57 |
| | | I got K7VTA3 version 8.0 motherboard. I have problem running PC2700
256MB memory. I tried 3 different brandname that same speed and size
and I got...
mmdir2002@yahoo.co.uk
|
05-28-2005 11:58 PM
Slim | 1 | 55 |
| | | Anyone know where to find a bios update for a P4VMM3?
Saskaroy
|
05-28-2005 07:39 PM
Saskaroy | 5 | 138 |
| | | I’ve got a K7S5A rev 1.x (XP compatible) which I recently had to
upgrade the CPU on in a hurry. The first CPU I could get hold of was a
Sempron 2600+...
electranaut
|
05-22-2005 05:32 PM
renaud | 4 | 59 |
| | | I have a 755-A2 socket 754 with a AMD Athlon 64 2800, 1 GB DDR
PC-2700 333 Mhz, GForce Fx 5200 8x 128 Mb AGP card. This combo ran
fine untill I...
Troy
|
05-22-2005 01:49 AM
mmiserus@xs4all.nl.invalid | 5 | 55 |
| | | I have a KT-600a with a Sempron 2400. I had reboot during shutdown
problems when installing my firewire card (InnoDV-1000LE). I tinkered
with the...
jon_1971
|
05-22-2005 01:36 AM
jon_1971 | 0 | 90 |
| | | Does the K7S5A Pro supports 512MB DDR modules with just 8 memory chips, so
single-sided?
Thanks.
--
___ ...
Daniele Gratteri
|
05-18-2005 08:14 AM
Daniele Gratteri | 2 | 88 |
| | | I have a new ECS 755-A2 (1.0) motherboard with an Athlon 3200+ processor.
The motherboard has the Realtek AC97 655 codec. The sound I get from...
Brad Penn
|
05-17-2005 06:29 PM
Brad Penn | 0 | 65 |
| | | Instructions on this board state, " This mainboard supports Ultra DMA...
install IDE devices
that support UDMA and use 80 pin IDE cables...."
Since I...
Xeno Chauvin
|
05-15-2005 04:03 AM
tcsenter@yahoo.com | 1 | 64 |
| | | Will the L7S7A2 run a Sempron CPU?
Can't find it listed on the AMD site, but since this is an
older board who knows?
Thanks
Xeno
Xeno Chauvin
|
05-12-2005 10:10 PM
Tod | 2 | 70 |
| | | Hi, my board failed to POST recently until i reset the BIOS. Afterward
i found that my system would not POST if FSB:RAM ratio was not 1:1.
I should...
debcrane
|
05-11-2005 11:41 PM
Victor | 1 | 65 |
| | | Hello all. I just set up my computer with WinXP pro SP2 and was doing
OK until the system mysteriously shut down (like there was a power
failure) and...
loched
|
05-09-2005 09:35 AM
Buffalo | 5 | 80 |
| | | Hello,
I already tried some other newsgroups, but no luck so far.
Sound on K7S5A Pro is distorted with onboard card with no regards to OS
(...
TomCat
|
05-09-2005 02:35 AM
Kyle | 1 | 62 |
| | | Has anyone else used this motherboard? I bought 3 of them to use with
several fcpga / fcpga2 processors that I had laying around. The driver
Cd has...
Jerry
|
05-06-2005 10:24 PM
Jerry | 3 | 62 |
 | | Quick synopsis:
PT800CE-A - Bios 1.1A
Prescott (P4) 3.0 GHZ
ThermalTake Pure Power 420 Watt
KingMax - 2, 512 sticks of PC3200
Here's the deal. I...
Duh_OZ
|
04-26-2005 03:29 PM
smartidiot | 18 | 110 |
| | | For many years I've been looking for something like
http://www.computergate.com/products/item.cfm?prodcd=XTKOPA. I bought
one and measured most of...
Felix Miata
|
04-24-2005 07:14 PM
Dorothy Bradbury | 9 | 98 |
| | | I replaced an ailing K7S5A Pro 5.0 under warranty from ZipZoomFly.com. It
took about 4 weeks to get a replacement, and in the meantime, I rebuilt...
kirbalo
|
04-24-2005 11:19 AM
kirbalo | 0 | 73 |
| | | Hi,
I have a K7S5A Pro motherboard, and recently reinstalled my RocketRAID 454
card. Everything works fine except that from the time the blue...
ERE
|
04-22-2005 01:37 AM
walks2work | 1 | 50 |
| | | I have a BookPC and I am pretty sure the power supply has
died. It is as PC100 Switching Supply Model PS100. I
haven't found any replacement on the...
gmnospam@nospam.xyz
|
04-22-2005 12:39 AM
gmnospam@nospam.xyz | 2 | 95 |
| | | ok, i just bought a kt600-a mobo and a sempron 2500+ with 512 ddr400
ram. everything works fine execpt when i load up quake 3, the
videocard or the...
megamer
|
04-16-2005 11:14 AM
megamer | 0 | 61 |
| | | I've had my K7SEM running quite happily for the last couple of years with MS
ME. I've upgraded to XP (SP2) and its incredibly slow, it takes ages...
Chris & Patsy
|
04-16-2005 05:01 AM
Chris & Patsy | 3 | 59 |
| | | Does anyone know what Brands of memory actually works with a 755-A2
board? It has the SIS755&964 chipsets. I am curently using
MemoryPro 1gb 2700 and...
Troy
|
04-15-2005 07:10 PM
Troy | 0 | 62 |
| | | Hi,
I bought an ECS 755-A2 mainboard, mounted an AMD Sempron 3100
socket 754, a Sapphire Radeon 9600Pro graphic card and 1Ghz RAM.
When I try to...
Marco
|
04-15-2005 07:10 PM
bassplyr1964 | 5 | 115 |
| | | Flash Bios and bios replacement service for 16,00 Euro, inclusive of
shhipping charge
http://www.recoverybios.com
Frank
|
04-14-2005 04:50 AM
Frank | 0 | 67 |
| | | Are the USB ports on this board USB1 or USB2?
Jr
|
04-13-2005 01:17 PM
Jr | 0 | 102 |
| | | I have an ECS KN1 Extreme and I downloaded the NVIDIA Sound Card
Drivers/Software - which installed fine.
I have Logitech Z560 4.1 Computer Speakers...
krzyray@gmail.com
|
04-11-2005 07:46 PM
krzyray@gmail.com | 0 | 61 |
| | | Hello all,
I have a 2.4 (AMD Athlon) processor in my PC, well it's been running
slow so I looked at the settings in the control panel, and saw that...
scottandadrianna@yahoo.com
|
04-11-2005 02:54 PM
scottandadrianna@yahoo.com | 3 | 55 |
| | | I have just purchased and fitted a VA-20 motherboard, the benchmarks looked
to be low (equivalent to a 133a chipset), looking with everest seems...
mavica
|
04-10-2005 10:38 AM
mavica | 0 | 61 |
| | | I want to upgrade my BIOS on my K7SEM but on the ECS website there are
BIOS's for the 3.0a or the 3.0c. How can I tell which version board I
have?
JBDen
|
04-09-2005 10:02 AM
PistolPete | 2 | 62 |
| | | I would like to upgrade my bios because i have a 200gb HDD & a
160gb HDD but my bios is only seeing 137gb on both. I'm confused on
which one i can...
PistolPete
|
04-09-2005 10:02 AM
PistolPete | 0 | 54 |
| | | I filled out
http://www.pcchips.com.tw/PCCWeb/Support/SupportTechnical.aspx?MenuID=49&LanID=0
due to problems with a PCChips T18 4 times in the past...
Felix Miata
|
04-09-2005 06:39 AM
Felix Miata | 0 | 87 |
| | | Hello all,
We have a new p4vmm2 that we can't get to work. installed it in case, turned
it on and the bios stuff came on the screen -counting up the...
Dennis
|
04-08-2005 11:15 PM
Dennis | 0 | 79 |
