Does anyone out there know if the K7SEM 1.0 can take Sempron processors? The official support list stops at XP 2200+. Also, are there any hacked or...

EEE

04-04-2005 09:15 PM
Brian Campbell

"flipper" <flipper (AT) fish (DOT) net> wrote Well, on a positive note, I contacted ZipZoomFly and they issued me an RMA. We'll see what happens...

kirbalo

03-26-2005 07:25 PM
kirbalo

I built a system about 18 months ago using the above board, a Athlon XP2400, mx440 video, 1 512 Mb RAM, a 40 Gb HD , 300W Antec power supply and a...

George

03-25-2005 01:41 PM
George

"Raúl Sánchez" <pastiNOSPAM (AT) wanadoo (DOT) es> wrote Almost certainly, yes. The DDR333 module will simply run at 266 mhz. -- Remove...

Mr. Slow

03-20-2005 05:55 PM
Mr. Slow

Last week, Turned my computer off, went to bed, got up next morning and turning by computer on, and that is when all the problems started. No POST,...

jeannette999

03-18-2005 11:41 PM
debrucer

Hi! Upgrading an old K7VZA Rev. 3.0 motherboard, I've tried a 512MB DIMM (64Mx72 PC133 SDRAM, CL3, ECC, registered) but the BIOS doesn't see...

Nikolaus Schulz

03-13-2005 12:03 PM
Mr. Slow

I'm running an un-modified 1.3 Duron with 512 Mb of memory. The system is about 2 years old. About 4 months ago, I started to get BSOD errors - all...

BoomerM3

03-13-2005 01:02 AM
Kylesb

"Thagor" <thagor (AT) email (DOT) coma> wrote snipped True - at least if it needs replacing, the only possible way to go is *up* ;o)

Toolman Tim

03-12-2005 02:23 PM
slutpuppycanis@yahoo.com

can a pt800ce-a handle the ati x800 xt agp 256 meg card if so are there any setting to change in the bios.

Andre LaFramboise

03-11-2005 05:24 PM
Andre LaFramboise

Just bought a new ECS 755-A2 motherboard. Installed it in a new Antek case with a 300w power supply. Put in a new AMD Sempron 3100+ CPU and 1GB...

Adam White

03-11-2005 10:39 AM
PJx

This one's a bit tricky I'm afraid. I'm putting a PC into a new case for a friend and the front panel USB ports(2 of) have different leads to the...

redTed

03-11-2005 10:35 AM
PJx

"flipper" <flipper (AT) fish (DOT) net> wrote

Buffalo

03-05-2005 12:04 AM
Mike Tomlinson

Just picked up the board from Newegg.com, tried installing Rosewill 512 DDR . Board says I've only got a 256 stick in. Tried putting both sticks in,...

gCrusher

03-04-2005 12:02 PM
Tod

Any experiences with a an ECS KT600-A? Good or Bad? I swore no more ECS boards after my K7S5A, but I need a cheap board for light to medium use for...

Jess Fertudei

03-04-2005 01:28 AM
Kent_Diego

I recently put together a Semtron 2200 on a KT 600. Everything is working except the fan rpm sensor for the CPU. The fan is running fine and I...

Brian

02-28-2005 10:47 PM
Kent_Diego

Hi all! I have a little question: what kind of combination of ddr can i do with an k7s5a pro? I means: i have one slot of 512MB DDR A-Data...

Flyzone

02-28-2005 09:58 PM
Tod

Hello flipper, So, the 500 can be overclocked easily by just upping the multiplier and testing? Then if it's unstable, try a +0.1V boost? At...

gene

02-28-2005 12:16 PM
gene

I have read online that the PM800-M2 supports the Celeron D320 chip... Does anyone have this combination working and what BIOS version does...

Michelle O.

02-27-2005 08:42 AM
Michelle O.

Hello all: I have a P4VMM2 V.1 now running a Celeron 1.8 and 2x256M PC2100. Will this board accept 2x512 PC2700 memory? How about a P4-2.8? Any...

Doc

02-24-2005 05:15 PM
Doc

Hello everyone,i am looking for A Dual Channel Kit that will work on my recently acquired KV2,Would Corsair Value select work? Does anyone have...

Thomas Kohl

02-22-2005 09:52 AM
Thomas Kohl

have a newphew and hes having probs with the built in lan. he cant connect to another pc. Just wondering if the VIA Hyperian drivers would fix all...

Paul M

02-21-2005 08:32 AM
Paul M

I took my cpu/fan out last week to blow clean them and inside my computer box. When I put it back together, nothing comes up on the monitor. Is...

seabee

02-20-2005 04:19 PM
seabee

I've got a problem I've check every part and they are all right but when i turn the computer on there are no beeps and no respond from the...

denis

02-16-2005 09:44 PM
Thagor

I know that hdd detection times are different by mainboards(or chipset?). Anyone knows where i can find these information?

what

02-14-2005 10:01 PM
what

I have this old AthlonXP 1800+ palomino core in my system I would like to get a new cpu that runs at least 2000mhz (instead of 1533) like a mobile...

Charlez

02-14-2005 05:32 PM
Tod

I recently was given an emachine that had a bad power supply and burned chip on the MB. I just tried the AMD 2200xp that was in it on a new ECS...

Brian Cloutier

02-14-2005 04:11 PM
Brian

Just got new mb and videocard (see subject). And can't get them work together. Black screen. Any ideas about bios set up or any other ways how to get...

rivnet

02-12-2005 06:18 PM
rivnet

Just installed them on this PM800 series and it seems to have perked up quite a bit. I don't have any numbers run yet. I was wondering if anyone else...

Thagor

02-08-2005 09:31 PM
Thagor

I'm trying to run a 1.3G Celeron2 OC to 1.7G by setting the CPU bus to 133MHz on this board. When I do this in the BIOS, on reboot the CPU is IDd as...

zafdor@yahoo.com

02-08-2005 07:11 AM
zafdor@yahoo.com

I have a ASUS p4r8oo that has problems with my DVD recorder so I am replacing it with a ECS 865G. I ordered it fron Newegg and the tell me to contact...

speicher

02-07-2005 03:34 PM
speicher

FlashBoot is a tool to make USB disks bootable. Its primary focus is USB Flash disks, but other types of USB devices are supported too. Making disk...

PrimeExpert

02-06-2005 01:00 PM
PrimeExpert

If anyone has a sd problem running Win98 on this board the solution is to not use the onboard lan. I disabled the onboard lan and put in a $15 pci...

Wally

02-05-2005 12:01 PM
Wally

I am trying to get a little more out of my mobo until the end of the year. I have a 1600+xp in this now and it works fine. According to Soyo, there...

wizrd0330

02-03-2005 09:59 AM
kirbalo

Does this board use PXE or RPL for the LAN boot?

red floyd

02-02-2005 01:08 PM
red floyd

I have a K7S5A V1.0 that I can't get any flash program to work on. I've tried AMI DOS flash (tow of them) and AMI WinFlash. None will work. Any...

Frank

02-01-2005 05:37 PM
Frank

I've got K7S5A V1.0 with the original bios 04/02/01. I want to upgrade the bios because sometimes on boot-up all the bios settings go away and I have...

Frank

02-01-2005 09:46 AM
kirbalo

I got one of the Fry's specials (KT600-A + Sempron 2400+). The video card works, so I can see things that don't work: The m/b doesn't see the kbd...

Charlie

01-31-2005 05:02 PM
Charlie

Does ECS make the motherboards for PcChips ?

Tod

01-28-2005 08:34 PM
Brian Campbell

After a clean winxp install on the elite K7S0M+ m/b, winxp cannot shutdown; If I press start-shutdown-shutdown, the system hungs to the screen...

Pierre

01-28-2005 12:56 PM
Pierre

My K7S5A decided today that it would not start up, so I opened the PC up and checked all the connections - but it still would not POST. The fans run...

Martin Taylor

01-28-2005 12:07 AM
Jess Fertudei

Has anyone succeeded in overclocking this MB? Please share your experiences, thanks.

Tai-Lau Chen

01-27-2005 04:38 PM
Frank

I got my MB and proc. running finally, just reinstalled winxp pro. Now whenever windows is running and I let it go Idle, either the motherboard or...

blackrabite

01-25-2005 09:53 PM
Thagor

Hi I'm running a K7S5A v3.1, and I've just installed a Hauppauge TV card (PCI). The card works fine, but after I shut down Windows, the PC won't...

Doc Dunning

01-25-2005 01:44 PM
Smoker~

Hello! I'm running a K7VZA PCB 3.0 purchased before Oct 11, 2001 (week 41). Can anyone tell me what is the absolute fastest CPU I can run ? Many...

Jiggy

01-24-2005 09:54 AM
Mr. Slow

"Tod" <no_spam_me (AT) comcast (DOT) net> ha scritto nel messaggio news:IJidnfV9i--PEW_cRVn-sQ (AT) comcast (DOT) com... Thanks for the link! From...

Daniele Gratteri

01-23-2005 08:49 AM
Daniele Gratteri

I have a desktop machine using an L7VTA motherboard and Award Bios, and for some reason it fails to recognise that a different diskette is in the...

Steve Webb

01-23-2005 06:52 AM
Mike Tomlinson

I have a 10,000 rpm Raptor drive attatched to the onboard sata controller on a ECS 755-A2 motherboard. I have run benchmark speed tests on this drive...

mpb

01-21-2005 09:36 AM
mpb

I know this is a little off topic, but I know people have answered power supply questions on my K7S5A here before. So if you don't mind, here's my...

wrosinski@home.com

01-20-2005 11:51 AM
kirbalo

Ok i hate having to actualy ask about this realy, But this motherboard has me at the end of my rope. Its a P4VMM2 v1. as far as i can tell and it...

Lucractius

01-19-2005 11:18 PM
Lucractius

Brand new ECS KT600-A mobo. No matter what hardware I have plugged in, even if no hardware, I get no POST beeps at all. It gets power because fans...

LRW

01-19-2005 03:05 PM
I95bigdog