Ok i hate having to actualy ask about this realy, But this motherboard has me at the end of my rope. Its a P4VMM2 v1. as far as i can tell and it...

Lucractius

01-19-2005 10:18 PM
Lucractius

Brand new ECS KT600-A mobo. No matter what hardware I have plugged in, even if no hardware, I get no POST beeps at all. It gets power because fans...

LRW

01-19-2005 02:05 PM
I95bigdog

When I last used my PC, it was running just fine and I left it in password protected mode (windows-L keys) so I wouldn't worry about anyone messing...

invalid@invalid.invalid

01-19-2005 10:42 AM
invalid@invalid.invalid

i have one thats reboots for no reason it can do it while on the net or when ripping a dvd never know when.any idears thanks

Andre LaFramboise

01-19-2005 05:32 AM
Andre LaFramboise

Well, it happened to me again. I had a K7S5A Pro r.5.0 that was bought new on 5/17/2004 and it crapped out on me already! The voltage to the...

kirbalo

01-18-2005 10:46 AM
kirbalo

Hi, I bought the AF1-Board and have two problems... 1) The SPK-1 pins for the PC-Speaker, where is it, it's not shown on the picture inside the...

Thomas Bahls

01-18-2005 09:36 AM
Thomas Bahls

I bought this small IR keyboard (with integrated mouse): http://www.newegg.com/app/ViewProductDesc.asp?description=23-107-114 The IR transceiver...

John Verdana

01-16-2005 10:37 PM
John Verdana

I saw this nice deal in frys ( $190 for 3gz p4, and ECS pt800 motherboard ). I want to know if the PT800 motherboard will support the variable...

ND

01-16-2005 07:16 PM
Thagor

I started recvently having loads if exceptions erros and automatic random rebooting from my computer. Someone has suggested that it is probavbly one...

J. P. Willis

01-16-2005 01:42 AM
Kylesb

That's de question. Who can help me ;-> -- Usando el revolucionario cliente de correo de Opera: http://www.opera.com/m2/

gOrOpE

01-15-2005 07:44 PM
Slang

One of the guys here at work got one of the $200.00 GQ systems from Fry's. I set it up, loaded XP instead of Linspire and all was well. One of the...

JohnF

01-14-2005 08:37 PM
Big Jerk

"flipper" <flipper (AT) fish (DOT) net> wrote i am looking for an upgrade to my duron 1.2ghz. i take it a full blown xp will run faster. if it is...

WallBanger

01-14-2005 04:24 PM
Bunch Of Fun

Is there a better flash for this board than the original? If so, where can I DL it? 2nd question: What is the 'Honey' flash? Does it work with this...

claw

01-13-2005 11:00 PM
kirbalo

Hi, I recently switched to a PCChips TidalWave W30 mobo with SIS 748 chipset. My Setup: Primary Controller: Samsung SP1213N and DVD-ROM Samsung...

Bernhard S

01-10-2005 11:20 AM
Bernhard S

I have an ECS Elitegroup Mainboard; Socket A, L7VMM2. Chipset - VIA KM266(NB) & VT8235 (SB) Chipset On windows 98 startup it keeps searching for a...

Northern Girl

01-10-2005 08:48 AM
Ikke01

Hi, I currently have xp1600+ and 760Mb of PC133 RAM sitting on my K7S5A rev1 board. I am after a cheap upgrade to XP2400+ or XP2600+. I can get both...

snajper

01-08-2005 07:16 PM
deathwalker

Hi I have a L7S7a2 motherboard, and just instslled winxp slipstreamed with sp2. My question is everything seems to be working great, but I noticed...

sal

01-06-2005 02:03 PM
Larry Scholnick

Hi I was just wondering if anyone knew of any alternatives for the K7S5A original bios? I have tried the HoneyX (9/10) and the CheepoBios (8/10)...

NimzoKarla

01-06-2005 12:39 PM
Sven Stieglitz

I have an ECS Elitegroup Mainboard; Socket A, L7VMM2. Chipset - VIA KM266(NB) & VT8235 (SB) Chipset On windows 98 startup it keeps searching for a...

Northern Girl

01-06-2005 10:36 AM
Northern Girl

This is a used (eBay) V3.1 board w/P4 2.53gHz. As received, JP4 (CPU voltage) pins 5-6 were jumpered, and BIOS was password protected. (BIOS...

Ralph Innes

01-04-2005 05:34 PM
Ralph Innes

Is there anywhere I can find Windows NT4.0 LAN driver for the onboard network controller? Also, someone in another post mentioned BIOS ver 1.0E, but...

Leo

01-04-2005 08:25 AM
Karsten Roch

just how bad are the sempron processors? i have heard numerous reports that they are MUCH slower than the Athlons?? thank you peter ynas

Pete Rynas

01-03-2005 01:20 PM
Brian Campbell

Friends, I want to replace my generic cpu cooler for something quieter. I've been looking at the Zalman CNPS7000B, but the K7VZA (Athlon Thunderbird...

Swingman

01-02-2005 10:48 PM
Big Jerk

Is it possible to control cpu fan speed in software on this board?

Swingman

01-02-2005 06:18 PM
Swingman

I bought a ECS KT600-a motherboard and a AMD Sempron 2400 (Frys bundle $59.95). After assembly it booted fine but would give me a sysdata.xl error at...

Robert Jordan

01-02-2005 10:25 AM
Robert Jordan

On Fri, 31 Dec 2004 19:31:06 -0600, flipper <flipper (AT) fish (DOT) net> wrote: I went out there, but it was very confusing. None of the...

Daddy-O

01-02-2005 12:08 AM
Daddy-O

Hi, My brother's computer has been showing strange behaviour for the past 1-2 years or so since I bought this combo. 1) The CPU always registers as...

Roger S.

01-01-2005 09:38 AM
Roger S.

Just loaded the new BIOS update on this XP system and now it insists on a parallel port although I don't use it and have it disabled in BIOS. I get...

Thagor

12-31-2004 04:13 PM
Thagor

http://www.ocworkbench.com/2004/reviews2004.htm

1234

12-31-2004 03:58 AM
1234

Hello, With Win XP what are the pros and cons of installing the SIS AGP driver from the ECS website, as opposed to leaving the standard XP driver...

Ellwood

12-25-2004 02:56 PM
Ellwood

Just bought this motherboard. When I attempt to install WinXP I get this long message after all the driver's are installed and attempts to boot...

flyboy

12-24-2004 08:54 PM
Leo

hi folks, which graficcard can I use on this board. At the moment I use Geforce 2 Titanium and I want to upgrade to a faster one. thanx for any...

Joe Lemmen

12-24-2004 05:47 PM
Adam Stemp

I have the above MB and currently have two sticks of 256MB PC2700 DDR installed in it. One stick is Kingston Value Ram and the other is a Nanya...

Ken

12-24-2004 04:48 PM
Eric Wolfe

Hi, I've got the following problem. I use a K7 AMA (1) and tried to upgrade to an athlon Xp 2600 xp. Recently I'm using an athon xp 1800 which runs...

Walter Gerecht

12-22-2004 05:19 PM
Mr. Slow

Hi all, I've got a old K7VZA mobo with an 800 Duron fitted to it. ( tested and runs fine ) I've also got hold of an 1800+ cpu and want to...

Ebodscki

12-21-2004 08:11 PM
Brian Campbell

Who can help me ? Naked Mobo with P4 and 256 MB DDR on it. The Mobo sometimes doesn't boot or hangs a while after start : for example i can then see...

ALPI

12-18-2004 03:28 PM
ALPI

Hi all, Working on a VPremier P4 system for a friend. It's a nice little box, P4 2.4ghz, 256mb, 40gb, good basic system. Problem is it won't power...

email-address-is-invalid

12-14-2004 07:13 AM
email-address-is-invalid

I can't seem to get my on-board Realtek AC97 to output true 5.1 on SPDIF out. I get descreet right, center and left but no back or subwoofer. I'm...

tommy

12-13-2004 11:40 PM
tommynospam@yahoo.com

I'm currently using a ECS K7S5A PRO with latest aftermarket bios (Honey X, Aug/2003) I've borrowed a friend's Promise 100 TX2 in the past. But now...

Tod

12-13-2004 06:23 PM
Brian Campbell

I have a K7S5A and I want to remove my 2x256MB PC133 to replace with 2X512MB DDR-333 Is it compatible? I know that DDR-333 is much cheaper than...

Charlez

12-12-2004 11:13 AM
Tod

Hello i'd like to know if anyone has seen this i have a pt800ce-a board with a 3.2 e chip and my temp on the chip seems to pole 4 time with...

bill

12-10-2004 05:53 PM
bill

Went to Fry's this afternoon, purchased the above items. Got them installed and working, booted up first thing. no problems at all except my PC does...

claw

12-09-2004 09:17 PM
Tod

i have one of these boards and need drivers and a manual. can anybody help?

MclarMart

12-09-2004 06:44 AM
Ikke01

I am looking to replace an old 733MHz celeron with something faster so I'm looking to replace the existing cpu/mobo with something in the 1.5GHz...

Impmon

12-08-2004 08:53 PM
Cuzman

I've been thinking a replacing my K7S5A PRO with a board that support the 333 bus. (currently using AMD 2000/266, two 256mb PC2700) I was thinking of...

Tod

12-08-2004 12:27 PM
Tod

I wonder if anyone can help me. I have a M841LR MB with a 1.2GB processor on it, 64MB of ram, 80GB HD and I'm trying to build a PC with it. I have...

Ray

12-07-2004 11:46 AM
kess

I have the above MB and have the on board C-Media AC97 sound system installed on Win XP. The sound works fine for music CDs and all other sound...

Ken

12-03-2004 07:58 PM
Ken

I've just re-built my stand by system with a K7VTA3 board, 256Mb PC2700 DDR Ram, 1 Gig AMD Athlon (running at 1333MHz, FSB 133)GeForce MX420 vid. For...

Puzzled

12-03-2004 07:40 AM
skippi

Hi All. In need of a processor /fan for my K7SEM motherboard. Can you help me out. On looking for my board, i think i will need a Socket A Duron type...

Bodysnatcher

11-30-2004 04:25 PM
Bodysnatcher

Is it possible? If yes, any idea when?

Sam Cheung

11-30-2004 05:13 AM
Sam Cheung