Hello NG, I have some kind of problem with my K7S5A Mainboard and a Promise SATA Controller, type SATA 150 TX2plus. The controller recognizes the two...

Jens Feistel

11-30-2004 03:12 AM
Jens Feistel

Hallo NG, habe Probleme mit meinem K7S5A und dem SATA Raid Kontroller von Promise, Typ SATA 150 TX2plus. Der Kontroller erkennt zwar die...

Jens Feistel

11-30-2004 03:08 AM
Jens Feistel

Hi can anyone tell me what kind of PC133 memory the K7S5A Pro takes? I have one a friend gave me that needs memory. Does this chipset want low...

Tom

11-29-2004 06:59 PM
hukuis

Does anyone know of a link with information about which video cards are compatibility with ECS motherboards? Thanks, BG

laplace@transforms.com

11-28-2004 06:38 PM
macjenna

RTFM! I did - finally. Got the speed up to snuff Now I have gone to ECS website, DL'd the BIOS flash that pertains to upgrading MB for Sempron. I...

claw

11-28-2004 06:15 PM
macjenna

Hello I search the card of jumpers for a old motherboard Elitegroup model UX486 VIO-A 40-0100-001131-00111111-111192-UMC480-H 3 ISA slots Major...

Paad

11-28-2004 02:51 PM
Paad

Someone knows how to set IRQ with this board. It seems to be impossible, to have the build-in/on-Board LAN-adapter AND to assign IRQ to the...

mhonline

11-28-2004 12:11 AM
Malte Gell

Just to post this funstuff with the printer-Port Printerport is not electrical neutral, when power is switched off, but has a short-circuit with...

mhonline

11-27-2004 01:41 PM
mhonline

I have an older computer that I am trying to refurbish using an ECS P6STMT motherboard bought off ebay. I am using a 733 Pentium III that runs at...

JeffG

11-27-2004 12:02 PM
JeffG

Has anyone had difficulty loading Suse 9.2 with this board. I have three computers, one has an Asus mobo and the other two are k7s5a. Suse 9.1 loaded...

dpw

11-25-2004 12:05 PM
dpw

I just built a Windows 2000 system around a K7S5A Pro (Version 5) using the e030811s.rom (BIOS). Every so often almost immediately upon boot up I get...

skippi

11-21-2004 10:09 PM
Kylesb

I just got one of those combo deals at Fry's: 848p-a mobo and a p4 3.2 chip. I'm putting it in a new case with 300W PSU, 512 DDR RAM from Kingston,...

Cavebutter

11-21-2004 06:19 PM
OldFartJAC

I bought an adaptec sata raid...

tommy

11-19-2004 06:49 PM
Robert Hancock

Hello, here is a quick description of my system Motherboard: ECS K7S5A Pro Processor: AMD 2400+ Memory : 1 DDR 512Mb Infineon (Model number :...

Martin Falardeau

11-19-2004 06:06 PM
Thagor

Hi Everyone. Does anyone know why I can't update the bios using this utility as recommended on the ECS website? Regards. Ray.

Not a PC wizard

11-16-2004 08:50 PM
Thagor

Is that normal that I can hear noises and music is distorted. I used drivers from original installation CD and drivers from SIS's...

Darek

11-16-2004 09:23 AM
Jo

I sold a year ago a system using ECS-K7S5A. He is now wishing to upgrade. His present ram is PC-133, as best I remember--definitely not DDR. What's...

sdlomi2

11-15-2004 06:02 PM
Shep©

I have an ecs k7s5a rev 1.0 that has a similiar problem. After I switched to DDR PC 2700 RAM (Crucial, 2 DIMMS 256 MB each). I get a video signal...

Mark

11-15-2004 01:58 AM
Brian Campbell

I just bought the K7VTA3/Sempron 2500+ combo and installed Win98SE. In Device Manager, there is a yellow "?" beside PCI Universal Serial Bus. I've...

laplace@transforms.com

11-14-2004 01:37 AM
laplace@transforms.com

Update: I posted some comments a while back about the WD 800JB 80G HD not getting recognized at cold bootup with my k7s5a. I've swapped an Nforce...

Kylesb

11-13-2004 01:33 PM
Kylesb

Thanks for the clear answer.

swingman

11-12-2004 01:23 PM
Swingman

Trying to determine which motherboard version my girlfriend has. How can one tell? Sisoftsandra doesnt tell me. Thanks

Pavel

11-11-2004 10:38 AM
Wolfgang Koch (blackspion)

OK, I realize a NG is mainly for problem fixes, and from reading this group, it appears that a lot of folks have problems with their K7S5A. I'm just...

Robert James

11-10-2004 10:58 PM
Robert James

I flashed my Bios with 030811. There were no operation problems prior to the upgrade. I was working on a LNB upgrade for a 250 Gig Hard Drive. ...

Joopman

11-10-2004 05:43 PM
Buffalo

Don't laugh - I'm a newby. HoneyX BIOS. Is this BIOS an upgrade to the original? Can I use it on the above listed board? Where is it...

claw

11-10-2004 12:47 PM
claw

Hi, is ist possible to get a bios for K7S5A or L7VTA which supports usb-boot? cu Helmut

Helmut Haeussler

11-10-2004 03:07 AM
Ikke01

"flipper" <flipper (AT) fish (DOT) net> schreef in bericht news:o2sqo0pkq9imqa2vtmd2mbi3q0mki7urqk (AT) 4ax (DOT) com... I know, I had some boards...

Hasj Pee

11-07-2004 08:45 AM
Hasj Pee

A friend has a K7S5A pro motherboard that hangs during a boot after displaying "Checking NVRAM" on the monitor. The memory test that normally...

Milan

10-31-2004 10:07 AM
Buffalo

Hi: I put a new power supply in my system. In doing so I accidentally disconnected the case power LED wire from the motherboard. I can't figure...

Ava Keech

10-31-2004 09:57 AM
Buffalo

Here's the scoop: K7S5A Pro Mobo: Being a bitch and won't start Psu: Voltage 115/230 Volt Current 7A/4A

John Avitable

10-30-2004 08:51 PM
Buffalo

The motherboard will boot for 3 seconds then shutdown. Occasionally the CPU, thermal grease and heat sink will be too hot to touch once it's on for...

Ricky Spartacus

10-30-2004 05:29 AM
Al

A cow orker of mine brought me his machine because he had a rapid rebooting problem. Upon inspection I could hear the CPU fan speeding up and...

Chris A. Kusmierz

10-28-2004 10:31 PM
Chris A. Kusmierz

A year or so ago I bought three K7S5A Pro boards to replace older PC's on an as-needed basis. Got three identical cases with Austin 300W P4 capable...

Eric Wolfe

10-28-2004 06:50 PM
Eric Wolfe

Well, i decided to reinstall windows, and install Windows XP Pro with SP2, and now sound doesn't work (on board sound). I try to install the drivers...

Elvis Pestana

10-28-2004 05:55 PM
Elvis Pestana

HI Folks, Here's the situation. I have the K7SOM+ revision 5.xC (I think it's 5.2C, but I'm not sure) mainboard with integrated everything (SiS) and...

NewsGroupie

10-27-2004 04:11 PM
NewsGroupie

Anyone seen a k7s5a act flakey on cold boot, specifically HD access problems until the system gets warm(er)? Using win2k sp4 on a WD 800JB 80 gig...

Kylesb

10-27-2004 05:38 AM
Al

My K7S5A stopped working suddenly. I had not opened the case, so it was not damaged by static. The symptoms are that the Power light comes on, but...

Al

10-25-2004 02:03 PM
Buffalo

i don't know why.. but my xp2200+ always crashes on the k7sem... the xp2200+ is original from AMD w/ the original fan that AMD provides too... why...

Volvo

10-23-2004 12:06 PM
Volvo

Hi! I neet to change my old cpu on k7s5a. Can I install sempron 2200+ as xp 1800+? If i change bus form 166 to 133 an moltiplitator from 9 to 11,5...

eltaglia

10-22-2004 01:10 PM
Brian Campbell

well i bought a USB 2 card from ebay it works fine and installs but it doesn't allow my card reader to work @ USB 2 speeds, and now i have...

smith

10-21-2004 02:27 PM
smith

We have 20 white boxes with these boards and would like to boot them over the network. Unfortunately they are all configured for RPL (Novell) instead...

Ullrich 'Jason' Haag

10-20-2004 03:23 PM
Ullrich 'Jason' Haag

I have the new ECS 848P-A mboard (with a prescott 3g) and USB2 will install on WIN2000 with (or w/o) SP3. Has anyone gotten USB2 to work with this...

Littleberry

10-20-2004 10:21 AM
Littleberry

Hi, i got an Elitegroup P6BAT-A+ flashed with the latest Bios update. The board is running with 350Mhz PII. I bought a 800MHz PIII running on 133MHz...

mugsi

10-16-2004 07:09 AM
mugsi

Hi, i have a ecs k7sa cpu xp1900 vga: radeon 9500 pro My problem is that some times the screen became blank or pc reebot during normal use of my pc....

KiKKo

10-15-2004 07:36 PM
KiKKo

hi all have a major problem with my board. i cannot get USB 2 enabled. its there as i have had it working before i formatted though i do not know...

smith

10-14-2004 01:00 PM
smith

Hi, Ich wollte ein aktuelles Spiel ausprobieren, dass DirectX9.0c voraussetzt. 9.0C wird nicht installiert (System "tut so" als ob es installiert...

Ralf Pogorzelski

10-12-2004 08:46 PM
Shep©

Does ECS have an FTP site?

EEE

10-11-2004 01:02 PM
EEE

Hi, I have problems installing a new Game which requieres DirectX9.0c on my Machine equipped with a K7S5A V1. Windows XP. 9.0c didnt install and...

Ralf Pogorzelski

10-09-2004 03:17 PM
Ralf Pogorzelski

Hello! I have elite k7s5a and I just bought a (used) ati radeon 9600pro graphics card. The system does not start at all. Windows may start but...

Kostas

10-09-2004 02:59 PM
Buffalo

what is the range for this 800FSB P4 3.0 gig chip with a copper fan running @ 2200 RPM?? right now it is 50 C , my old P4 2.4 gig 533 FSB ran at 28...

Pete Rynas

10-08-2004 09:41 PM
PJx