dan wrote:

FWIW, I get mine from Digikey -- www.digikey.com


--
The e-mail address in our reply-to line is reversed in an attempt to
minimize spam. Our true address is of the form che... (AT) prodigy (DOT) net.

On Sun, 01 Aug 2004 20:36:19 GMT, CJT <abujlehc (AT) prodigy (DOT) net> wrote:

What was the total costs?

I've got one MSI 6330 board and 2 K7S5A's
All of these boards work, but usually lock up or become
stable after 30 minutes. I've already replaced em all
with new boards and these are just sitting on the
shelf.

TX_Dude wrote:

Every board will be different, depending on how many of what caps
it uses. Probably between $10 and $20, plus whatever your time is
worth. As I recall, Digikey has a $25 minimum if you want to avoid
extra handling charges.

--
The e-mail address in our reply-to line is reversed in an attempt to
minimize spam. Our true address is of the form che... (AT) prodigy (DOT) net.

electronix.com had a $10 minimum when I ordered.

I didn't buy for a K7S5A, but each cap was about 75 cents.

dan

TX_Dude wrote:

dan wrote:

That sounds pretty cheap for 105 degree low ESR caps. Maybe
even too cheap.


--
The e-mail address in our reply-to line is reversed in an attempt to
minimize spam. Our true address is of the form che... (AT) prodigy (DOT) net.

Fry's Electronics has several new K7S5A Pro v.5.0 boards for $38.

Pj



On Mon, 02 Aug 2004 14:21:13 GMT, CJT <abujlehc (AT) prodigy (DOT) net> wrote:

Which Fry's......the one in Plano?

On Fri, 06 Aug 2004 11:29:51 -0500, PJx <me (AT) privacy (DOT) net> wrote: