k7vta3 v8.0 wont post

#1

Got the ktvta3 v8.0 with Duron 1800 at frys. Set up system with gf4 mx440
and mushkin pc3200. No post, no beeps no video no nothing. Swapped out
(one at a time) gf4 ti 4200, corsair pc 3200, and duron 600. Reset cmos,
and bumped fsb settings back down to 100mhz. No luck same thing happens
each time...ie nothing, no beeps, no video, etc. Any suggestions?

#2

PSU?

Does anything, like fans, power up? If you can swap the PSU.

"J Elson" <jdelson (AT) hotmail (DOT) com> wrote

Quote:

Got the ktvta3 v8.0 with Duron 1800 at frys. Set up system with gf4 mx440
and mushkin pc3200. No post, no beeps no video no nothing. Swapped out
(one at a time) gf4 ti 4200, corsair pc 3200, and duron 600. Reset cmos,
and bumped fsb settings back down to 100mhz. No luck same thing happens
each time...ie nothing, no beeps, no video, etc. Any suggestions?

#3

300W antec PS. Fans/cd/HD/VideoCard Fan powers up.

"Richard Haygreen" <rjth2 (AT) ukc (DOT) ac.uk> wrote

Quote:

PSU?

Does anything, like fans, power up? If you can swap the PSU.

"J Elson" <jdelson (AT) hotmail (DOT) com> wrote in message
news:t_ednbKXHqRVAEOiRVn-vA (AT) comcast (DOT) com...
Got the ktvta3 v8.0 with Duron 1800 at frys. Set up system with gf4
mx440
and mushkin pc3200. No post, no beeps no video no nothing. Swapped out
(one at a time) gf4 ti 4200, corsair pc 3200, and duron 600. Reset
cmos,
and bumped fsb settings back down to 100mhz. No luck same thing happens
each time...ie nothing, no beeps, no video, etc. Any suggestions?

#4

swapped board. Now boots up no problems. Those dang dead mobos will drive
you crazy

"J Elson" <jdelson (AT) hotmail (DOT) com> wrote

Quote:

300W antec PS. Fans/cd/HD/VideoCard Fan powers up.

"Richard Haygreen" <rjth2 (AT) ukc (DOT) ac.uk> wrote in message
news:1071566430.671346 (AT) ananke (DOT) eclipse.net.uk...
PSU?

Does anything, like fans, power up? If you can swap the PSU.

"J Elson" <jdelson (AT) hotmail (DOT) com> wrote in message
news:t_ednbKXHqRVAEOiRVn-vA (AT) comcast (DOT) com...
Got the ktvta3 v8.0 with Duron 1800 at frys. Set up system with gf4
mx440
and mushkin pc3200. No post, no beeps no video no nothing. Swapped
out
(one at a time) gf4 ti 4200, corsair pc 3200, and duron 600. Reset
cmos,
and bumped fsb settings back down to 100mhz. No luck same thing
happens
each time...ie nothing, no beeps, no video, etc. Any suggestions?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

k7vta3 v8.0 wont post

Elitegroup Motherboards Elitegroup mainboard discussion (alt.comp.periphs.mainboard.elitegroup)

k7vta3 v8.0 wont post - 12-15-2003 , 11:53 PM

Re: k7vta3 v8.0 wont post - 12-16-2003 , 03:21 AM

Re: k7vta3 v8.0 wont post - 12-16-2003 , 09:54 AM

Re: k7vta3 v8.0 wont post - 12-18-2003 , 09:43 AM