I just purchased an L7S7A2 Mobo with the AMD XP2700+ CPU...The maximun
multiplier jumper setting on this board is 12.5 (going by the manual)
this gives 12.5 x 166= 2075MHz...the AMD XP2700+ is a 2170 MHz
part...are there any 'secret' jumper combinations on this board to set
the correct speed for this CPU or will I have to overclock past 166
MHz to set the correct frequency?

Thanks in advance foor any help.

**** Post for FREE via your newsreader at post.usenet.com ****

You'll notice in the manual.....the "by CPU" setting.
Use it....should be default anyway.
The XP2700 is multiplier locked anyway, so changing
the multiplier settings won't do anything.

"cagliostro" <cagliostro (AT) my-deja (DOT) com> wrote



-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
*** Usenet.com - The #1 Usenet Newsgroup Service on The Planet! ***
http://www.usenet.com
Unlimited Download - 19 Seperate Servers - 90,000 groups - Uncensored
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=