| | Rating Thread /
Thread Starter | Last Post  | Replies | Views |
 |  | On Sun, 11 Apr 2004 00:51:16 +0100, Jack <ny (AT) privacy (DOT) net> wrote:
Two part answer, should I, and even could I ? The question...
borolad@myowseintheboro.org
|
04-11-2004 02:00 AM
borolad@myowseintheboro.org  | 0 | 12 |
| | | ABIT nf7-s MOBO; 2X512 pc3500 CAS2 ram; AMD 2600+ (wk37)
Settings:
FSB = 200
Multiplier = 11x
Vcore = 1.75
Memory timmings = 11-3-3 at cas2
Memory...
Richard
|
04-10-2004 07:55 PM
Peter Harrington | 5 | 13 |
| | | Thanks very much for putting me 'in the know'
Garry
"Ed" <nobox (AT) hotmail (DOT) com> wrote
Jago
|
04-10-2004 07:26 PM
iTsMeMa | 10 | 23 |
| | | i have a 2400xp runing at 1999mhz with a room tep of 24c,my cpu not loaded
it 38c loaded it is only 49c
to get my com has on case
"jean cool"...
tony
|
04-10-2004 07:22 PM
iTsMeMa | 3 | 9 |
| | | do you think an exaust fan will cool my cpu down. last night i was
playing a game and i got to 45 C. I think thats to hot.
Ryan
|
04-10-2004 04:17 PM
Ed Light | 5 | 19 |
| | | I have both of these but haven't had time to take both systems down and
remove their heatsinks. The TR2-M2 works great on a Barton 2500+ @ 3200+
with...
Chris
|
04-10-2004 10:52 AM
neopolaris | 1 | 14 |
| | | I just bought an EPoX 8RGMI & compared the graphics speed to my Asus
A7N266-VM. I ran a 3d screen saver that shows the...
Gregory Toomey
|
04-10-2004 07:54 AM
Geoff | 1 | 18 |
| | | Hi
Im after info on unlocking the 128 cache to 256 on a duron 1.8ghz.
Thanks
Ken
|
04-09-2004 06:13 PM
Martin Gallagher | 2 | 10 |
| | | When should we expect this to be released in the uk?
Figurt
|
04-09-2004 08:10 AM
Figurt | 0 | 14 |
| | | (Posted this in the 64 newsgroup, but not many people there.)
I was reading a review of the Aopen AK86-L Via motherboard and the...
red_nose@bozo.com
|
04-09-2004 07:06 AM
red_nose@bozo.com | 2 | 19 |
| | | at7max-2
512 corsair xms pc3200
(2) wd 40 gig in raid 0
abit ti 4200
ahtlon 2400xp oc'ed to 2800xp 333
Just recently I began to have problems when I...
chrisj
|
04-08-2004 04:48 PM
chrisj | 5 | 19 |
 | | 'Daft' is quite a common term here in the UK....Not everyone who posts here
comes from the USA, many actually belong the 'other' 95% of the...
Brian Hopkinson
|
04-08-2004 11:23 AM
Roger Hunt | 18 | 22 |
| | | Hi
I have Athlon XP 2500+, Epox 8rda3i mobo, 2x256MB TwinMos DDR400 MHz in Dual
Mode. I've tried to OC them from 2500+@333mhz fsb to 3200+@400mhz....
Coffin
|
04-08-2004 03:45 AM
Nico | 2 | 16 |
| | | I would like to know how well the Koolance Exos will perform with the White
Water Block for cooling a XP 3200 cpu ? Will the flow rate be high...
Max Harrell
|
04-07-2004 09:57 PM
Neil | 1 | 14 |
| | | Under Downloads
http://www.h-oda.com/
S.Heenan
|
04-07-2004 09:09 PM
Canus_Lupis | 7 | 13 |
| | | I would like opinions of these three motherboards. I plan to purchase one soon, and need opinions as
to why one board is better than the others....
lazya
|
04-07-2004 07:54 PM
QBall | 5 | 16 |
| | | Hi all. New to group.
I've read all posts of the last week and have found some good info about my
question but it's not particular to my system....
dorkus.erectus
|
04-07-2004 07:33 PM
Ed Light | 7 | 15 |
| | | On Wed, 07 Apr 2004 14:53:11 +0200, Roland Scheidegger
<rscheidegger (AT) gmx (DOT) ch> wrote:
Too bad they don't put the output filters in the...
anonymous
|
04-07-2004 09:22 AM
anonymous | 0 | 14 |
| | | Sal Amie wrote:
None do your safe, also with Pentium 4's you can turn off HT in the BIOS.
Minotaur (8*
Minotaur
|
04-07-2004 08:17 AM
Minotaur | 0 | 12 |
| | | For Higher Speeded RAM than 3200 do i just need to raise the Memory Voltage.
Or Do I need to OC my front side bus. Maybe a guide on how to run the...
Daniel P
|
04-07-2004 02:48 AM
Ben Pope | 4 | 16 |
| | | "Geoff" <fooooooool (AT) hotmail (DOT) com> wrote
razor or pin mask the area around the pit then fill with conductive paint.
The last L5 is the one...
boostland
|
04-07-2004 12:05 AM
boostland | 0 | 14 |
| | | "Matt Graham" <mdg149 (AT) rcn (DOT) com> wrote
working tho only for a short time as I did it only to see if it worked.
Check this forum out for...
boostland
|
04-06-2004 11:54 PM
boostland | 0 | 18 |
| | | Probably, the reason you didn't notice any speed difference is because the
applications you are running were not being hampered by a lack of CPU...
Rick
|
04-06-2004 06:46 PM
Ed Light | 7 | 14 |
| | | http://www.nvidia.com/object/sysutility_1.08.5.html
Your motherboard is based on the Nforce2 chipset. So, you can use this tool.
It is safer than...
Wayne Wastier
|
04-06-2004 06:04 PM
Wayne Wastier | 0 | 13 |
| | | as spring temps rise, have noticed a slight increase in core temp. Should
temps start encroaching the 60 degree range, which would be a better way...
pheasant
|
04-06-2004 10:56 AM
RD | 9 | 14 |
| | | "NuT CrAcKeR" <nutcracker (AT) internationalhacker (DOT) org> wrote
Maybe (probably) both are fine and when used separately they will run
without...
Walter Cohen
|
04-06-2004 03:00 AM
ElJerid | 2 | 13 |
| | | Hi,
First, sorry for my bad english i´m spanish.
The fsb for the XP2800+ is 333, no? Can i change the fsb to 400?
Is stable and/or...
Juanjillo
|
04-06-2004 01:48 AM
Juanjillo | 10 | 20 |
| | | Has anyone tried this combination and if so what were the results?
Chuck S
Chuck S
|
04-05-2004 11:17 PM
Chuck S | 0 | 13 |
| | | I was talking to a sysadmin from a retail store & he just put together a
system with an Intel hyperthreading chip. He says under linux it comes...
Gregory Toomey
|
04-05-2004 10:20 PM
Minotaur | 3 | 12 |
| | | "Irrat8ed" <nomail (AT) nomail (DOT) com> writes:
The cache on the processor is certainly going to try to hide any increases
in memory speed. IF...
Don Taylor
|
04-05-2004 04:51 PM
Don Taylor | 0 | 14 |
| | | what !!!
FIC made something good ?
!?!?!?!!!
I didn't see that coming....
Geoff
|
04-05-2004 03:25 PM
Roger Hunt | 7 | 14 |
| | | I'm having a problem getting my PC running at the proper speeds.
PC Specs:
Mobo: ECS L7S7A2 Mobo
Proc: AMD 2500+ Barton
RAM: Dane-Elec 184 Pin...
JBS1
|
04-05-2004 11:52 AM
JBS1 | 0 | 11 |
| | | I have an xp2700 on an abit nf7-s mobo and am unhappy with the stock
heatsink and fan. I had wanted to get the THermaltake SIlentboost, but
they...
BiPolar
|
04-05-2004 09:08 AM
BiPolar | 8 | 13 |
| | | Hi,
If anybody is lookin to upgrade I think the Mobile XP 2600 is the way to go!
I bought one for $100 from NewEgg and an ABIT NF7-S board refurb...
Hades
|
04-05-2004 05:17 AM
Ed Light | 3 | 12 |
| | | I'm planning on building an A64 system soon but I'm waiting for the KT800pro
and NF3-250 based boards before I replace my 1700+ @ 2.5ghz.
Anyone...
LBJGH
|
04-05-2004 05:11 AM
anonymous | 1 | 17 |
| | | Why is my athlon 2500+ 55 celcius? I've een lowered the to vcore1.60. If I
try to overclock 200fsb it goes over 60 when i do large tasks. i've...
Hervey Cleckley
|
04-05-2004 05:01 AM
Leon Smith | 7 | 20 |
| | | Here is my issue, I'm overclocking an AMD Athlon XP 1800+ (tbred) and
I'm concerned about the CPU temp, I keep getting different CPU
measures from...
rtf
|
04-05-2004 12:39 AM
rtf | 5 | 16 |
| | | I recently purchased a Barton-core 2600+ that I thought was going to be
unlocked. I had already upgraded my RAM to OCZ PC3200 and my cooling to...
Mark Walker
|
04-04-2004 03:58 PM
pberry | 3 | 18 |
| | | I previously read on one of these newgroups about a fix for a loud fan in an
Antec trupower PS. Anyone remember or have a link to this fix? Sorry I...
knowname
|
04-04-2004 01:20 PM
rstlne | 3 | 10 |
| | | "Patrick Tite" <patricktite (AT) sympatico (DOT) ca> wrote
with the cpu volts set at 1.9 volts. I am using the Thermalright ALX 800
heatsink.
Max
Max Harrell
|
04-04-2004 12:22 PM
Max Harrell | 0 | 13 |
| | | Hey everyone, I thought I’d tell you about this place I got my AGP Card
from. I got a 256MB ATI Radeon for $106.00 and he carries the new AMD
64-bit...
mr_computer_pro
|
04-04-2004 09:36 AM
Geoff | 5 | 10 |
| | | To run a network of 2 PC's with this mobo do I need a router? And if not is
there anything special I should be aware of?
PC 1 has and A7N8X-E Mobo...
COCA COLA KID
|
04-04-2004 08:37 AM
Alan | 9 | 10 |
| | | Ive got a Asus A7N8X-E deluxe mobo
athlon xp 2600+
512mb kinsgton ddr333 ram
radeon 9800 pro
audigy 2 zs
etc
etc
on stock settings ( 166fsb / 166...
pberry
|
04-04-2004 05:09 AM
Apollo | 10 | 19 |
| | | Why are you looking for the answer to such a thing anyhow. The group might
be able to answer a more specfic question if you ask it (I notice...
Michael Brown
|
04-04-2004 04:48 AM
rstlne | 2 | 12 |
| | | Hello. Conflicted about a Barton 2500+ retail for $83.00 or the 2600+
Mobile OEM for $101.00 at newegg. Will be overclocking at a target of...
Centroid
|
04-04-2004 01:46 AM
Dylan Christopherson | 3 | 15 |
| | | "Lem" <lem (AT) mail (DOT) com> wrote
AppleBred
rstlne
|
04-03-2004 02:41 PM
rstlne | 0 | 15 |
| | | "nut cracker" <nutcracker (AT) internationalhacker (DOT) org> wrote
I don't get that option. It only goes as far as 1400(133). RAM is pc2700
(166)....
john cody
|
04-03-2004 08:57 AM
john cody | 5 | 11 |
| | | On Thu, 01 Apr 2004 06:58:39 +1200, Bruce Tyler <top (AT) bottom (DOT) au> wrote:
Lots to be said for single channel: reliable, simple, cheap. The...
stan@nospam.com
|
04-03-2004 03:27 AM
LostSoul | 2 | 14 |
| | | I've got a Gigabyte 7VAX board based on the KT400 chipset and want to lock
down the AGP and PCI bus speeds to overclock by raising the FSB. I've seen...
zzipper
|
04-02-2004 09:37 PM
S.Heenan | 3 | 10 |
| | | news.claranews.com wrote:
I wouldn't say OCZ is better than Corsair. Corsair offers PC4400 on their
website, which, according to them, has been...
S.Heenan
|
04-02-2004 04:01 AM
Chip | 1 | 11 |
