| | Rating Thread /
Thread Starter | Last Post  | Replies | Views |
|  | Verger wrote:
You can look up processor overclocks here.
http://www.cpudatabase.com/index.cfm?Action=search
Some processor families have had...
Paul
|
05-22-2007 09:54 AM
Paul | 2 | 476 |
|  | Thanx for the explanation Phil...
Confused? you bet!, but learning more each day thanx to guys like you...
P G
|
05-21-2007 04:40 PM
P G | 3 | 106 |
|  | Has anyone here tried ocing a 6320? I was going to get a 4300 or 4400 but
it looks like only the early runs were good overclockers? The 6320 is...
Billy Bob
|
05-21-2007 10:11 AM
Billy Bob | 5 | 87 |
|  | One of my new HDs is clicking every hour or so, but I can't figure out which
one is dying because it seems that the RAID layer is blocking my access...
Phil, Non-Squid
|
05-20-2007 07:33 PM
Ed Light | 6 | 87 |
|  | What is the highest overclock for radeon 9550 xt?
Genius
|
05-19-2007 03:15 PM
Augustus | 1 | 86 |
|  | The E6320 and the E6420 have 4m shared L2 caches
http://www.newegg.com/Product/Product.aspx?Item=N82E16819115016
"Phil Weldon" <not.disclosed (AT)...
Nick Le Lievre
|
05-18-2007 04:55 PM
Andy Facadio | 2 | 91 |
|  | "Phil Weldon" <not.disclosed (AT) example (DOT) com> wrote
To use with 3 monitors utilizing inexpensive video cards in financial
application.
Peter van der Goes
|
05-18-2007 04:47 PM
Phil, Non-Squid | 12 | 125 |
|  | Phil Weldon said
Win2000 is better to OC with as XP can get screwed up by messing with the
FSB, 2k never has, as far as I and a lot of others have...
leadfoot
|
05-17-2007 09:30 AM
Guest | 12 | 137 |
|  | Just ran across this at the EVGA forum. It talks about core 2 duo temps. I
guess the two cores are usually different. It also says that the Intel...
P Gagg
|
05-17-2007 03:01 AM
Forrest | 10 | 121 |
|  | Hi...
Just a general question about case fans.
Do people think that case fans should draw warm air OUT of the case, or
draw cool air INTO the...
P G
|
05-16-2007 08:28 PM
Allistar | 2 | 89 |
|  | Hi...
I'm tweaking one of my older pc's (I built it about three years ago) and
the cpu seems a bit hot to me, does anyone know what the...
P G
|
05-15-2007 04:08 PM
Peter van der Goes | 7 | 82 |
|  | In the new pc I have just built, I have a Nvidia GeForce 8800GTS (320Mb)
GFX card (PCI-E) from overclockers.com
What sort of core clock and memory...
P G
|
05-15-2007 11:36 AM
P G | 2 | 86 |
|  | Hi..... my question....
During the last couple of days I have just built myself a new Intel Core 2 Duo E6600
based pc. I understand the clock...
P Gagg
|
05-14-2007 04:19 PM
P Gagg | 0 | 82 |
|  | Dear Groups (sorry for crosspost),
Last few days, I'm plagued by some vague instability. Every now and then my
whole screen freezes (pc hangs)....
Thomas
|
05-11-2007 08:19 AM
Jack R | 8 | 88 |
|  | What's a good web site with frequently updated product (motherboard,
processor, memory, etc) news and reviews related to home-brew PC...
peter
|
05-11-2007 03:37 AM
Thomas | 2 | 83 |
|  | How to update BIOS on computer running Vista 32-bit without floppy drive?
007
|
05-10-2007 09:31 PM
peter | 1 | 79 |
|  | "Phil Weldon" <not.disclosed (AT) example (DOT) com> wrote
I'm using the same MOBO as you, Phil, (EVGA 680i) but with an E-6600. I just
got this...
Jack R
|
05-09-2007 04:55 PM
Forrest | 3 | 90 |
|  | ô_ô wrote:
So how did you fix it ?
A future P4s800d user, might appreciate your wisdom.
Paul
Paul
|
05-08-2007 11:06 PM
Paul | 1 | 96 |
|  | "Phil Weldon" <not.disclosed (AT) example (DOT) com> wrote
readings, lockups and just a lot of other issues I think I will remove it
and just use...
Ed Medlin
|
05-08-2007 05:01 PM
Forrest | 1 | 89 |
|  | Following up on "Phil, Non-Squid"'s findings, I upped the FSB from 1066 to
1350. Incredibly enough, this setting posted! All settings between 1100...
Thomas
|
05-06-2007 04:04 PM
Fishface | 3 | 88 |
|  | So my week 44 cheapie processor finally came in and I was able to just start
messing around with it today. I used Easytune to ramp up the FSB to get...
Phil, Non-Squid
|
05-06-2007 03:02 PM
Thomas | 5 | 82 |
|  | "Phil Weldon" <not.disclosed (AT) example (DOT) com> wrote
have hit upon something that, at least, gives NView some use. Before, I
could not get...
Ed Medlin
|
05-06-2007 08:27 AM
Ed Medlin | 3 | 84 |
|  | "jake" <jakoblin (AT) gmail (DOT) com> wrote in message...
Your single question is actually two separate questions:
Is it worth overclocking your...
Richard Hopkins
|
05-06-2007 01:43 AM
jake | 2 | 97 |
|  | So my week 44 cheapie processor finally came in and I was able to just start
messing around with it today. I used Easytune to ramp up the FSB to get...
Phil, Non-Squid
|
05-05-2007 08:58 PM
Phil, Non-Squid | 0 | 88 |
|  | So my week 44 cheapie processor finally came in and I was able to just start
messing around with it today. I used Easytune to ramp up the FSB to get...
Phil, Non-Squid
|
05-05-2007 08:58 PM
Phil, Non-Squid | 0 | 87 |
|  | Phil Weldon napisa³(a):
frequency at 250) cause I set my memory multipier to 2.66 and everything
work fine. tell me what is better for boost...
afi777
|
05-05-2007 12:03 AM
afi777 | 14 | 129 |
|  | We knew that.
Just took it for a typo.
Amir
"Phil Weldon" <notdiscosed (AT) example (DOT) com> wrote
peter
|
05-04-2007 11:12 PM
nobody@nospam.com | 12 | 139 |
|  | Hello,
I just installed the following config:
CPU Intel Core2Duo E4300 with original Intel fan
M/B ASUS P5N-E SLI
GPU Geforce 7900 GTX
I made a...
thierryjacob@hotmail.com
|
05-04-2007 03:19 AM
Al Brumski | 1 | 80 |
|  | Arctic Silver has issued new instructions for application of
AS5 for Intel dual and quad core CPUs. Who...
Fishface
|
05-03-2007 10:39 PM
Fishface | 0 | 89 |
|  | Phil Weldon wrote:
Yes, default voltage. CoreTemp says my E6400 has a default voltage of
1.275v, presumably by reading the vid pins, hence the...
Thomas
|
05-03-2007 08:33 PM
ul csa vde | 23 | 172 |
|  | "xrongor" <hacky (AT) smackeycrackey (DOT) com> wrote
This the OC forum and bad grammar and spelling are not tolerated either.
Learn to use the...
Phil, Non-Squid
|
05-03-2007 08:24 PM
i got your caps right here | 4 | 82 |
|  | "Phil Weldon" <not.disclosed (AT) example (DOT) com> wrote
If you have a true OEM version of XP (not one preinstalled on a boxed
system) the system...
P Gagg
|
05-03-2007 08:16 PM
Amir Facade | 4 | 87 |
|  | Well, everything finally arrived
except the case. That figures since the
case is what I may need to modify a little
for my slightly larger PSU and...
Ed Medlin
|
05-03-2007 08:19 AM
Ed Medlin | 3 | 85 |
|  | Hi All,
Have an Intel D975XBX2 mobo and a QX6700 chip with an Intel Pentium D HS/F
(low noise). Motherboard BIOS hardware monitoring says the CPU...
R. J. Salvi
|
05-02-2007 09:16 AM
R. J. Salvi | 0 | 77 |
|  | Phil Weldon wrote:
Oh, yeah, different socket. But I believe he did mention one LGA775 chip in
which he was interested. This article gives a rough...
GyanGuru
|
05-01-2007 12:43 AM
Fishface | 4 | 87 |
|  | On Sun, 29 Apr 2007 20:36:12 GMT, "Phil Weldon"
<not.disclosed (AT) example (DOT) com> wrote:
OK. I've overclocked every system I've built for...
dago81anchor@gmail.com
|
04-30-2007 01:45 PM
Folk | 4 | 83 |
|  | Phil Weldon wrote:
You're welcome, of course... Anyway, I can only set VCore (1.325 - 1.45
tested), northbridge (1.2 - 1.4 tested), memory (2.0 -...
Thomas
|
04-30-2007 09:53 AM
Ed Medlin | 6 | 92 |
|  | Put together the following system:-
E4300 Core 2
Thermalright Ultra-120
ASUS P5N32-E SLI motherboard
2GB Crucial Ballistix PC2-6400
7900GT
and am...
random206@googlemail.com
|
04-30-2007 01:00 AM
Billy Bob | 12 | 126 |
|  | You're getting better results than I am, but still poor.
Please let us know if you get any results in contacting EVGA and nVidia.
Thanks,
Jack R
Jack R
|
04-29-2007 09:27 PM
ireviewstuff@gmail.com | 5 | 80 |
|  | Thanks Phil,
I'll stay away from nTune!
<reading and learning>
Jack R
"Phil Weldon" <notdiscosed (AT) example (DOT) com> wrote
Jack R
|
04-28-2007 07:29 PM
Colin DW | 9 | 78 |
|  | Hi!
Just a quick q. I see a lot mentioned about the 4300 beeinga desent Ocer
and good price/performance. How about the 4400? It's very little...
Thomas Andersson
|
04-26-2007 11:25 PM
Thomas Andersson | 0 | 79 |
|  | Hi everybody,
I have the opportunity to aquire an HP workstation at a good price - the CPU
in that machine is an AMD Dual Core Opteron 1210 (1.8Ghz...
constantine
|
04-26-2007 03:18 PM
constantine | 2 | 88 |
|  | "Phil Weldon" <not.disclosed (AT) example (DOT) com>
wrote in message
news:lVzXh.4855$j63.156 (AT) newsread2 (DOT) news.pas.earthlink.net...
to do a...
Ed Medlin
|
04-25-2007 05:41 AM
Ed Medlin | 24 | 217 |
|  | Phil,
I am not at home this afternoon, and won't be this evening either. From what
I remember, but I may be wrong, tCMD = 4 would be equal to you...
Michel R. Carleer
|
04-24-2007 11:54 AM
Michel R. Carleer | 8 | 86 |
|  | Phil Weldon wrote:
I thought your post had something to do with synchronous transfer, as if there
was something magic about the 1:1 ratio. The...
Paul
|
04-23-2007 10:19 PM
Paul | 2 | 80 |
|  | The Core 2 Duo chips use "socket 775".
I'm using an ASUS P5N-E Sli, very nice, and well rated.
Lots of OC'ing options, too.
My $.02,
Jack R
"Colonel...
Jack R
|
04-23-2007 09:41 PM
Jack R | 1 | 85 |
|  | "Phil Weldon" <not.disclosed (AT) example (DOT) com> wrote
System: E6600 / DDR2 533 (PC5300) / P5W DH mobo.
Overclocked E6600 @ 3.0 GHz / FSB 1333...
Nick Le Lievre
|
04-23-2007 09:35 AM
M. R. Carleer | 31 | 213 |
|  | Does anyone know how to change the memory timing on a Gigabyte GA965P-DS3
firmware F10? I am stuck at 5-6-6-17 at 900mhz and cant find any...
Heywood Jablowme
|
04-23-2007 05:26 AM
Ed Medlin | 2 | 93 |
|  | "Phil Weldon" <not.disclosed (AT) example (DOT) com> wrote
At heavy processing load, and at 2.7 GHz, I am getting a temperature reading
of 58...
Talal Itani
|
04-23-2007 03:10 AM
Plato | 4 | 84 |
|  | Hello friends. Can anyone help me to overclock safely my e6300, with
the ga-965p-ds3/s3? Please help me! :(
j.s.13
|
04-21-2007 02:04 AM
j.s.13 | 0 | 83 |