| | Rating Thread /
Thread Starter | Last Post  | Replies | Views |
 |  | I've been looking to move to Core 2 and one thing slightly perplexes me,
I've always thought Intel locked the multipliers on their processors
(with...
Proto
|
04-19-2007 05:09 PM
Michel R. Carleer  | 2 | 19 |
 | | ---reading avidly---
I'm enjoying reading through this thread...good stuff!
Have you tried SpeedFan? http://www.almico.com/speedfan.php
I have...
Ed Medlin
|
04-19-2007 10:11 AM
Jack R | 42 | 90 |
| | | Hi all,
I have the following setup:
M/b: Asus P5B deluxe, 1066MHz FSB
CPU: Intel QX6700
RAM: 2 x Corsair XMS2 DDR2-800 (2Gb)
PSU: Tagan TG580-U15...
Allistar
|
04-18-2007 09:19 AM
Ed Medlin | 9 | 26 |
| | | Low Profile Conroe Cooler 11.5cm or lower needed.
Must be quiet and efficent even at lower fan RPM. Nice to be quiet at
maximum as well.
The...
Aussie Paladin
|
04-17-2007 08:48 AM
omegand@gmail.com | 1 | 18 |
| | | How do you overclock a 7600gt in vista, i can't get coolbits to work, what
are other people using, thanks in advance.
Internode News
|
04-14-2007 04:52 PM
legendof.jonnie@gmail.com | 1 | 17 |
| | | Take a look at Gary's site here.
He has been around this group forever off and on.
http://www.motherboardrepair.com/
I'm pretty sure this is who you...
rec.audio.pro
|
04-13-2007 09:14 AM
Ed Medlin | 2 | 20 |
| | | Phil Weldon wrote:
Apparently the word out there is that pre-week-40 E4300's are the 3.6GHz and
higher candidates. Anything after week 40 is pretty...
Phil, Non-Squid
|
04-09-2007 02:34 AM
Phil, Non-Squid | 5 | 27 |
| | | Phil Weldon wrote:
Perfect! I understand better now. Thanks.
--
Phil
Phil, Non-Squid
|
04-07-2007 01:57 AM
Phil, Non-Squid | 6 | 20 |
| | | I am using a celeron M 1.6 GHz and am trying to overclock, but i cannot
figure out what PLL to use for my chipset. Cpuz tells me i have a...
kevo
|
04-03-2007 11:35 PM
kevo | 3 | 21 |
| | | jb39 (AT) trillium (DOT) net wrote:
Dear Jb,
the owner's manual for the 8300 is...
BC
|
04-03-2007 09:35 PM
Bob Knowlden | 1 | 19 |
| | | I have a Biostar TForce 939 motherboard that requires a new CMOS battery
about once a week. Does this mean that whatever is supposed to be
keeping...
User
|
04-03-2007 08:21 PM
Paul | 1 | 13 |
| | | I have all these drivers but still have a problem with the LAN and MCP( I
think). Both have hazard signs in Device manager. I think that...
nntp.nildram.co.uk
|
03-31-2007 06:06 PM
nntp.nildram.co.uk | 4 | 24 |
| | | I saw a boxed gigabyte GA 965P-S3 motherboard at a local computer store.
I looked all over the box but could not see what revision it is. I am...
peter
|
03-26-2007 07:27 AM
Davy | 2 | 15 |
| | | In experimenting with overclocking a new system, I've noticed that
the CPU temperature displayed varies very quickly with load. Running
orthos gets...
Bob F
|
03-24-2007 02:26 PM
Richard Hopkins | 4 | 27 |
| | | I'm considering switching to a core 2 due cpu after years of just AMD
machines (only upto S939 DDR and not DDR2 machines).
However coming from such a...
Proto
|
03-19-2007 12:18 PM
GinTonix | 2 | 28 |
| | | I'm trying to OC my D975XBX2 with a E6600. I've gotten it up to 3.1GHz
(FSB 346MHz) with no problem. Fully loaded temp is at 50 C, stability
is good,...
byar
|
03-18-2007 10:45 PM
byar | 0 | 17 |
| | | (message (Hello 'Yousuf)
(you :wrote :on '(Fri, 16 Mar 2007 02:49:27 -0400))
(
YK> It's hardly something most people care about, even enthusiasts....
Alex Mizrahi
|
03-17-2007 04:43 AM
Alex Mizrahi | 0 | 22 |
| | | I've overclocked my 2.6 to only 3 just to be safe.
I had it up to 3.3 and it was stable unless I was playing a graphically
intensive game, then it...
Kokken
|
03-15-2007 09:54 PM | 2 | 30 |
| | | How can I buy a mobo with the latest revision?
Many people at newegg complain they are getting older revisions of a
motherboard.
peter
|
03-15-2007 12:50 AM
__ | 2 | 19 |
| | | I have a 1.8 P4 and was wondering how you go about over clocking it?
Thanks
Jesse
pitts5
|
03-14-2007 04:50 AM
Ed Medlin | 5 | 45 |
| | | Well, can Microsoft answer this question? Why
does Gothic 3 run better and smoother in 4 gigs
of ram, and it is jerky in 2 gigs of ram? And then
add...
Trimble Bracegirdle
|
03-12-2007 03:20 PM
johns | 30 | 61 |
| | | Hi @all!
I hope I'll receive answers by overclockers even if this message is a
little OT.
I've a Radeon X1650 Pro AGP with fan always @100%. :-(
In...
Armando
|
03-10-2007 09:08 PM
Armando | 0 | 20 |
| | | According to cpuz, FSB:memory is 1:1. And just in case you wonder, I was
able to increase the bus/memory from default 200Mhz to 280Mhz (no...
peter
|
03-10-2007 01:04 AM
peter | 2 | 13 |
| | | On Fri, 16 Feb 2007 09:47:29 +1300, "risc" <risc@cisc>
wrote:
http://www23.tomshardware.com/cpu.html?modelx=33&model1=486&model2=448&chart=169
It...
risc
|
03-08-2007 02:55 PM
Trimble Bracegirdle | 36 | 72 |
| | | Hallo
Ik heb ongelofelijk nieuws wat ik je wil vertellen. Ik heb sinds kort een
nieuw soort business
op gestart wat ik van uit huis, in mijn vrije...
Erik Smid
|
03-08-2007 12:13 PM
Erik Smid | 0 | 23 |
| | | Any tests on stock retail HS?
bob
"Phil Weldon" <notdiscosed (AT) example (DOT) com> wrote
Ed Light
|
03-05-2007 07:23 PM
Billy Bob | 14 | 47 |
| | | Is the a way to estimate the impact of memory latency and clock rate on the
overall system performance? In other words, if you plan to overclock, do...
peter
|
03-03-2007 01:35 AM
beomagi@gmail.com | 2 | 39 |
| | | Hello. I have shuttle ak32 mainboard.
In the specification there is written:
1)Support Socket462 package CPU with 200/266 MHz FSB
2)Self...
Przemek B.
|
03-03-2007 01:10 AM
beomagi@gmail.com | 1 | 21 |
| | | Phil Weldon wrote:
EIST is for power savings, not for thermal reasons. If the processor
is not being used, it drops to a low power state. And has...
tom@japtuning.ch
|
03-02-2007 09:49 PM
Paul | 5 | 30 |
| | | "Phil Weldon" <notdiscosed (AT) example (DOT) com> wrote
overclocking the two main things to consider is heat and stability. I got my
Pentium D...
mcsconsult@gmail.com
|
02-27-2007 11:17 AM
Paul | 26 | 52 |
| | | I asked this in an asus forum but received no reply. Perhaps someone could
help here.
I just put together a PC using intel E4300 and an asus...
peter
|
02-26-2007 02:02 AM | 2 | 21 |
| | | Gents I am confused at looking at guides that don't exactly match up with my
setup. I have a evga 680i SLI MB, Intel e6700 Core Duo, evga 8800GTX and...
Chappie
|
02-23-2007 12:38 PM
Don Burnette | 1 | 19 |
| | | The retail intel E4300 CPU comes with a heat sink with 3 strips of paste
where it contacts the processor. Would it be better if I add heat...
peter
|
02-22-2007 04:18 PM
Al Brumski | 1 | 19 |
| | | Do these memories tend to be upward compatible? Can a DDR2-800
or DDR2-677 memory be used for a motherboard designed for
DDR2-533, such as an ASUS...
Bob F
|
02-21-2007 01:14 PM
Bob F | 0 | 22 |
| | | Two questions:
1) Does low temperature improve performance with normal clocking on a
desktop with static clock?
2) Does #1 apply to notbooks where...
SoCal
|
02-19-2007 01:49 AM
Guy | 1 | 24 |
| | | jake wrote:
No.
Vista is a resource sucking pig. If you want your
computer to run like a slide show, then go right
ahead.
If you read the reviews,...
Paul
|
02-15-2007 06:33 AM
Paul | 0 | 13 |
| | | "Phil Weldon" <notdiscosed (AT) example (DOT) com> wrote
But then people would not be able to email me if they wanted. With my
reply address, all...
Bobbie Weeks (Ms)
|
02-14-2007 06:30 PM
Bob F | 5 | 17 |
| | | I'm shopping for a low end core 2 duo.
Is there any strong reason to pick either the E4300 or E6300? Price
difference is negligible. Which one...
peter
|
02-14-2007 01:55 PM
Ed Light | 1 | 21 |
| | | Hi Folks,
My Athlon Thunderbird socket A is running at around 1GHz on an
A7V266. I'd like to get a new heatsink and quiet cpu fan for it (the
old...
Allie
|
02-13-2007 05:15 PM
Wes Newell | 5 | 15 |
| | | ok,i started over and overlocked it to 3 ghz...it was stable with
stability test with 60 c temp..what is the max temperature?i'm confused
with many...
d805
|
02-12-2007 07:35 PM
Billy Bob | 27 | 66 |
| | | Ed Light wrote:
Heh! You think you've got it bad? I'll have to stick with my XP1800+ T'bred
B JUIHB (133MHz x 11.5 stock) running at XP2400+ speed...
mike3
|
02-12-2007 07:32 PM
~misfit~ | 49 | 70 |
| | | On Mon, 5 Feb 2007 22:04:43 -0000, "John Whitworth"
<sexyjw (AT) gEEEEEEEEEmail (DOT) com> wrote:
in regard to my earlier post ...
This is table...
....@m
|
02-12-2007 12:00 AM
~misfit~ | 7 | 17 |
| | | I need a bios upgrade for my computer. The bios string is :
08/02/2001-8363A-686B-6A6LMG99C-00. Please help
kbunsee@hotmail.com
|
02-11-2007 11:20 AM
kbunsee@hotmail.com | 0 | 25 |
| | | I am tryin to overclock this thing. There is something wrong with the
BIOS on it. Everytime i try to get into the BIOS it comes up with an
error...
naza
|
02-10-2007 07:19 AM
naza | 0 | 23 |
| | | MSI K8N Neo2 Plat. Edition nForce3 Ultra
AMD Athlon64 3700+ SanDiego 2.2GHz TRAY 1MB
or
ASRock 775i65G R2.0
Pentium D 820 dual core
For video...
brkica
|
02-10-2007 07:13 AM
Ed Medlin | 3 | 29 |
| | | Hi.
Well, I decided to do some detailed investigation into the alleged
"Extreme Overclock" video show a chip exploding from overclocking...
mike3
|
02-10-2007 12:12 AM
One_shot_weasel | 1 | 26 |
| | | I have been using a sidewinder force feedback II joystick with
the microsoft Combat Flight Simulator 3. It seems like the
forces are backwards. I go...
Bob F
|
02-09-2007 02:04 PM
Bob F | 0 | 16 |
| | | Wat is best buy (for overclok)
CPU AMD Athlon64 BOX 3800+, Sck939 or
CPU AMD Athlon64 BOX 3200+, Sck939
or am2
CPU AMD Athlon64 3800+ BOX, Sck AM2...
brkica
|
02-08-2007 11:09 AM
Peter van der Goes | 1 | 20 |
| | | Hi, can anyone please tell me what is the fastest cpu that I can fit to
my motherboard?
The M/B is an Asus A7N8X Deluxe, rev 2.0 using bios version...
pg
|
02-05-2007 01:44 PM
Ian | 5 | 24 |
| | | I am thinking about my next PC, and am considering the Pentium D or
Core 2 Duo processor. I am running 3 TV tuner cards currently, so
I would like to...
Bob F
|
01-31-2007 04:39 PM
VanShania | 4 | 12 |
