Phil Weldon wrote: I wasn't even thinking about that. According to this thread, I guess some 440BX motherboards had the 1/4 divider and some didn't....

Billy Bob

10-27-2006 05:14 AM
Richard Hopkins

The P6D series has a 100MHz FSB and will take two PIIIs or PIIs. CPU/Bus ratios are set by four jumpers on the mainboard. The possible ratios range...

Lew Robinson

10-27-2006 02:52 AM
Lew Robinson

After updating to the 1503 bios i can not longer change CPU Vcore voltage, i guess thats why its a beta? The Bios setting in the advanced menu...

Ron Shaw

10-25-2006 07:59 AM
Ron Shaw

I don't want to fry my system, but I just threw together some older parts and would like to try overclocking, a little. I have Abit kd7 raid amd...

takoma

10-24-2006 06:26 AM
Thomas

Hi guys, I've just recently purchased an AM2 Sempron 3000+ CPU, I'm running it on a Gigabyte GA-M55plus-S3G motherboard with the Geforce 6100...

Strutter1982

10-22-2006 03:02 AM
Strutter1982

On a system that normally uses DDR 400 RAM, would DDR 500 be more easily overclockable, like just by increasing FSB speed? The FSB speed is usually...

Judd

10-21-2006 11:40 PM
Paul

Im new to core 2. Can anyone advise me on what RAM ( 2 gig) I should look at.I do overclock, currently have my old p4 2.66 @ 3.1 for last 4...

dpm

10-16-2006 11:51 AM
Al Brumski

I'm about to build my new computer on Monday, with an E6700 CPU. Now, this is going to be my first OC so I'd like some help with it. I've read about...

Grimscythe@gmail.com

10-15-2006 01:23 PM
Paul

With the new PC that I'm gonna have on Monday, I will have a 7950 GT in it. I was reading about the specs for it and I can't find much...

Grimscythe

10-15-2006 12:06 PM
Grimscythe

Ok, here is my problem I have an e6600 on an asrock 945g-dvi mainboard witha leadtek 7600gt graphics card. When i first got the computer i had a...

wheres_wally

10-13-2006 09:41 AM
Paul

Phil I will be moving on next year when Vista is out. I'll build a new system then. As a long time overclocker (Celeron 300@450 days), I still like...

news.comcast.net

10-12-2006 09:03 AM
Billy Bob

"Phil Weldon" <notdiscosed (AT) example (DOT) com> wrote morning about Intel releasing their Core-2 Quad by early next year......... Amazing where...

GIRunit

10-07-2006 08:56 AM
GIRunit

Seeing that out-of-stock $150 Opteron 165 on NewEgg got me thinking (I havn't bought one -- yet).... To OC an Opty, you need to keep the HT=<1000 (...

andrew.gullans@gmail.com

09-30-2006 07:29 PM
robin gordon

Subject says it all... I purchased a Infinity 975X/G motherboard for my C2D 6700 and its not a bad board... to few SATA ports IMHO (looking at...

Southpaw

09-29-2006 07:07 PM
Southpaw

The old Katmai is retired. The link for the slot -T adapter and a 1.1GHz tualatin celeron now grace this old box. Thanks for your help. The...

pheasant

09-29-2006 12:43 AM
~misfit~

Anyone got any ideas on how to reduce the noise from a Fujistsu Siemens Primergy RX100 rackmount 1U server? It'm currently in a different...

dale303@gmail.com

09-28-2006 04:30 PM
dale303@gmail.com

hi there. I'm building a box based on P4DC6+ board with two passive copper coolers for both CPUs. The passive cooler isn't enough to sufficiently...

AT

09-28-2006 04:29 AM
GIRunit

Has anybody used a Big Typhoon or a Zalman 9500 in a Sonata II case with a ASUS P5B deluxe? Any problems fitting it in? Does the plastic air...

Major Ninth

09-28-2006 04:29 AM
GIRunit

The fan on my graphics card doesnt work, i managed to make it twitch once but it never worked any better than that, I at first assumed it muct only...

metal_flowboard

09-28-2006 04:29 AM
GIRunit

Hi I have an HP Media center with a Intel P4 530. I did overclock it but now I want to change CPU What CPU can I put in there ? Can I put for...

davis

09-24-2006 01:42 AM
whitlom

Abit AS8 (i865PE) with Celeron D336 (2.8GHz) -------------------------------------------------------------------------- I have this motherboard...

Peter Allison

09-23-2006 03:31 AM
Peter Allison

I am about to switch from AMD to Intel's Core 2 Duo. What is the best motherboard for this chip? I really want to buy Asus but if you have...

atlantica

09-23-2006 02:43 AM
atlantica

X-No-Archive: yes I have an idea about what overclocking is (speeding up a processor over it's normal speed) but how in the world do you do...

Pete

09-22-2006 03:28 AM
Don W. McCollough

system is SO loud: AMD 64 X2 4200 w/ standard fan Asus A8N Premium Geforce 7800 GTX x 2 (SLI) 2 Case fans I have the AMD cool 'n quiet drivers...

dennispublic@hotmail.com

09-22-2006 03:25 AM
Don W. McCollough

I have this motherboard fitted with a Socket 775 Celeron D, and previous posts tell me 1. The Celeron has less cache than a Pentium 4 5xx or 6xx...

Peter Allison

09-22-2006 12:46 AM
Paul

"Phil Weldon" <notdiscosed (AT) example (DOT) com> wrote OC, fine. I still do. This system is an EM64T 3.0g that runs great at 3.6g and would...

pheasant

09-21-2006 10:23 AM
Ed Medlin

you absolutely write here http://allLucyLiu.info -- Posted via a free Usenet account from http://www.teranews.com

kurtw12

09-17-2006 09:05 PM
kurtw12

Hi. Muy quest is to OC sempron2800+ from stock 2Ghz to at leat 2,4Ghz but after aplying FSB190 mhz my comp dosent start(black screen). My question is...

syzer

09-16-2006 01:10 AM
~misfit~

Anna Kounikova p0rn mov1e! 8) http://allAnnaKournikova.info -- Posted via a free Usenet account from http://www.teranews.com Warning: Do not use...

sterder9

09-10-2006 09:04 PM
sterder9

I have a naive question: does FSB frequency selection for overclocking have to be done at BIOS time, or is it possible to alter it via a privileged...

ivowel@gmail.com

09-04-2006 05:44 PM
Paul

I'm looking for some advice on a new system. Something that will give me a good bang for the buck when overclocking. My previous systems have been...

kamisama

09-03-2006 11:39 AM
MadFox

I've been following all the hype about the CABYE/CABNE steppings of these processors. Like many others, I'm desperate top get an Opteron 146 gor...

bossk128@gmail.com

09-02-2006 08:35 AM
robin gordon

A couple people asked about these boards here recently, one person looking to replace one due to blown caps. Well, just thought I'd mention that I...

~misfit~

09-02-2006 08:28 AM
~misfit~

I am working on a specific project that involves a lot of number crunching. I am looking to build one or more machines to cope with the problem. I am...

Neil Jones

08-31-2006 05:03 PM
.SuperBLUE

iv just got an ol computer, which was second hand, iv recently learned that you can get different speed pci/agp slot thingys anyway, does this mean...

metal_flowboard

08-29-2006 09:50 AM
Ed Medlin

Hi All, Thanks in advance for any answers to my question. I have the Gigabyte board in the subject, with a Pentium D 805 CPU. Got them both as...

Funex

08-27-2006 12:27 PM
Electric Pineapple

Intel Xeon model 5160 (Woodcrest Core 2 Duo), 3.0Ghz, any benchmarks on Intel Xeon model 5160 Woodcrest Core 2 Duo 3.0Ghz ? alone or better compaired...

inventor

08-26-2006 11:44 PM
inventor

Hi, I have a PC Chips MB with a 600mhz CPU all of which is 5-6 years old. Was wondering if anyone tried loading windows XP on one of these? Were...

Greg Schoolden

08-24-2006 10:01 PM
Ed Light

hi do the new motherboards with heatpipe cooling on their mosfets chips etc have to be mounted in any particular way i.e. does gravity play any part...

oLDfART

08-20-2006 07:00 AM
Andrew MacPherson

Hello -- See my sig for hardware. One of my Xeons has died, and I'd like to use the opportunity to make a performance upgrade. I've seen a lot of...

Rohan Beckles

08-19-2006 04:29 PM
Rohan Beckles

Hello everyone. I'm new to this forum, so sorry if I'm posting this question in the wrong thread. I posted it somwhere else, but I dont think it...

gakor

08-19-2006 12:18 AM
~misfit~

Hello , i need help !!!! How can i change recycle bin icon ? Thanks

olegb

08-18-2006 10:48 AM
Larc

The Gold edition of the Gamers' Extreme XTC DDRAM (1GB DIMMs) has recommended timings of 2 - 3 - 3 - 8 at DDR400 speeds, 3 - 4 - 3 - 8 at DDR500...

ajmoss_throwaway_account_001@hotmail.co.uk

08-17-2006 08:22 PM
EDM

FSP350-60THN-P http://www.fsp-group.com.tw/english/1_product/2_detail.asp?mainid=1&fid=52&proid=213 I know FSP is a good make, but judging by the...

q_q_anonymous@yahoo.co.uk

08-17-2006 01:14 PM
Paul

Measuring with a multimeter, my PSU 12V rail varies between 11.4 and 11.6 According to hmonitor, it varies, says at around 11.4 mostly, , someitmes...

q_q_anonymous@yahoo.co.uk

08-15-2006 02:47 AM
Paul

What's the best way to quieten a WD Raptor without making it overheat? Without getting into watercooling, this is the best thing I found so far, but...

Synapse Syndrome

08-13-2006 02:18 AM
Carl

Hi Folks, I have an HP Pavilion ze4325us laptop; of course, since it's a complete package type system, the bios does not have any overclocking...

Anonymous

08-10-2006 07:09 AM
Anonymous

KVM switch use with Wireless USB mouse and keyboard ??? I've got 3 computers and i want to control them all with my Wireless USB keyboard and...

Home Theatre Guy

08-10-2006 12:01 AM
Venom

USING: ABIT BH6 motherboard with 1.3GHz Intel Tualatin processor using an adaptor. 384MB PC100 SDRAM. WD 250GB & WD 200GB harddrives connected to...

John

08-09-2006 02:39 AM
David Maynard

What's this about?I see this on low end DDR.Both have 64x64.What's the deal? I'm aware of this on PC 100 SDRAM but not...

job

08-09-2006 02:06 AM
Julie Green