| | Rating Thread /
Thread Starter | Last Post  | Replies | Views |
 |  | Ok recently my computer has been randomly shutting down when it starts
getting busy.
When I reboot my computer a voice comes on my speakers and...
MatthewL
|
01-18-2006 01:27 PM
John Edmister  | 2 | 67 |
| | | Hi all,
Have installed my new a64 4400 + stock 2.2ghz @ 1.4v have now slowly clocked
up to:
260 x 10 = 2600mhz - HTT x 4 ram 2.5-4-4-8
Everything...
Christy
|
01-17-2006 12:09 AM
eventerke@hotmail.com | 10 | 116 |
| | | Hi,
Not sure if this is the right forum to ask this question, but here goes
anyway.
I just installed a GeForce 5500 graphics card, and everything...
Ian Stevens
|
01-16-2006 10:40 AM
Ian Stevens | 0 | 37 |
| | | "EdG" <spammerz (AT) hotmail (DOT) com> wrote
So it's supposed to show the bios settings, then? After entering everything
it showed the bios...
Hellraiser
|
01-15-2006 12:44 PM
Ed Light | 4 | 41 |
| | | DFI Lanparty UT NF4 Ultra-D this support Opteron 165 cpu ??
Also does an Opteron Support normal ram. Or do i have to use ECC...
Miltion
|
01-15-2006 10:26 AM
Miltion | 0 | 120 |
| | | hello!
im running my p3/866 mhz at a clock of 975 ( changing the fsb from 133
to 150 ) - the computer keeps running without problems and...
deckard
|
01-15-2006 04:33 AM
Rick S. | 1 | 68 |
| | | Opteron 165 for gaming. This a good idea ??
I think you could overclock it to 2.5ghz easy. And the Dual core and
the 2 meg cache should be...
Miltion
|
01-13-2006 05:12 PM
Miltion | 0 | 117 |
| | | My system:
AMD A64 4400+ x2 (Toledo core 2x1mb L2 cache)
MSI K8N SLI Diamond (NF2 Chipset)
POC Nvidia GF7800GTX 512mb Extreme
2 x 512mb G.Skill DDR...
Grateful Gift
|
01-12-2006 07:34 PM
Ed Light | 1 | 64 |
| | | any recommendations or recent reviews on the best 21-22" crt monitor? shadow
mask preferred as the lines drive me batty but if an Aperture grill...
spr
|
01-10-2006 09:33 AM
spr | 0 | 49 |
| | | hello-
i am using the p5gd2 premium mb with intel p4 3.2 cpu.
in the past week i have been getting "cpu over temperature" followed by
"press f1 to...
zark
|
01-09-2006 07:38 PM
Paul | 7 | 135 |
| | | Restating problem in more clear/concise manner:
My Tyan K8WE (S2895) motherboard needs CPU fans with 4-pin connectors for
fan speed control from...
Scotter
|
01-09-2006 09:41 AM
Scotter | 2 | 80 |
 | | "Kimmy" <justagirl (AT) hotmail (DOT) com> wrote
Years ago this group used to be filled with overclockers, there was AMD and
Intel users here and...
F0rS4k3n666
|
01-04-2006 06:14 PM
EdG | 24 | 497 |
| | | Decided to take the 1 ghz amd chip out my AK37GT mobo and switch it out
with a Barton 2800.
Was successful getting the chip to work at 100 X 12.5. ...
joe m
|
01-02-2006 05:32 PM
dannysdailys | 24 | 146 |
| | | "Bushy" <ex(underscore)boss (AT) hotmail (DOT) com> wrote
in a high ambient temperature room, a peltier cooler may do the trick, you
probably wont...
drhowarddrfine
|
12-31-2005 10:40 PM
~misfit~ | 12 | 60 |
| | | Hello all,
What is a good resource for a newbie learning to over clock.
Also recommendations/ comparisons of AC vs. water vs. air...
Alaeddin
|
12-30-2005 05:08 PM
John Edmister | 3 | 63 |
| | | Greetings -
I'm building the system described below and will do some mild to moderate
overclocking. I have assumed up to now that I would...
Magnusfarce
|
12-30-2005 10:11 AM
David Maynard | 6 | 62 |
| | | Thermaltake Polo 735 rev 2 A2144
I have a p4...
q_q_anonymous@yahoo.co.uk
|
12-29-2005 04:12 PM
q_q_anonymous@yahoo.co.uk | 2 | 46 |
| | | Hi folks,
I need some help with my "ultra-low budget silent pc" project. When I
built my current PC, which I'm using for work and gaming in my...
Serban Andrei Dumitrescu
|
12-27-2005 09:40 PM
Leadfoot | 1 | 31 |
| | | Hello,
I have just installed 4mb cable broardband (blueyonder) but the connection
speeds seem slow. Web browsing and downloding is no where near...
Ricard Woodward
|
12-27-2005 08:36 AM
Richard Hopkins | 3 | 67 |
| | | Some questions about Raid 0. its for a new PC.
From what i read raid 0 is the fastest version. But not the safest.
Not realy concerned about safe...
Boris Easten
|
12-27-2005 08:28 AM
Richard Hopkins | 1 | 41 |
| | | My chip is a P4 2.0 GHz and the cmos reports that after I press f1. My
mobo is a TH7ii RAID.
My memory is Samsung MR16R1628AF0-CK8 256x4.
When...
kilowatt@charter.net
|
12-26-2005 07:53 PM
~misfit~ | 1 | 227 |
| | | Hello,
Will the iwill DH800 work with one DIMM?
The manual says not to install three. I understand for dual channel
operation it requires memory...
SteveSch
|
12-25-2005 08:41 PM
SteveSch | 3 | 33 |
| | | I suppose many of you have seen this experiment.
they put a 486/66 inside a fridge full of frozen beer, and overclocked it up
to 300mhz playing duke...
vader
|
12-23-2005 12:44 PM
Thomas | 3 | 61 |
| | | Hello,
I own a Gigabyte 8I955X Royal with an Intel D840EE and two 512 MB
CorsairCM2X512A-5400UL DDR2 RAM.
They are tested to run at 675 MHz at...
Stephan Bielicke
|
12-21-2005 10:36 PM
Phil Weldon | 1 | 32 |
| | | Or the thin ice their skating on.
http://www.timesrepublican.com/columns/story/121202005_colcol.asp
Then there's...
Dennis E Strausser
|
12-19-2005 07:02 PM
Dale Brisket | 1 | 29 |
| | | I am looking for some info about CPU pin currents. In various
white-papers on the web it is ussualy mentioned summary current Icc
(cca. 50...80 A for...
zmaj
|
12-19-2005 12:59 AM
David Maynard | 7 | 31 |
| | | http://processorfinder.intel.com/scripts/details.asp?sspec=sl6ef&procfam=483&pkgtype=all&sysbusspd=all&corspd=all
Carlos
|
12-18-2005 09:53 AM
JT | 1 | 31 |
| | | Anyone got this installed into a GA 8N SLI Royal , how does it
perform?
Ridge Walker
|
12-16-2005 11:14 PM
Ridge Walker | 0 | 27 |
| | | help unlock my laptop :retard:
BenTZ
|
12-15-2005 05:11 AM
Pete | 2 | 50 |
| | | I'm a bit stumped about overclocking (properly) with this board and I'd appreciate some tips from anyone knowledgeable. I've tried
this and that but...
tg
|
12-13-2005 08:22 AM
Richard Hopkins | 3 | 42 |
| | | The Aquaverve online boutique was founded to offer the highest quality
water appliances for the home and office. Please take a few minutes to
browse...
feelrelations@gmail.com
|
12-12-2005 03:05 AM
feelrelations@gmail.com | 0 | 31 |
| | | After quite thoroughly shopping (researching) around for the best
motherboard for me, I guess the AT8 is the closest to what I need.
Notice I said...
gold fingers
|
12-11-2005 02:19 PM
gold fingers | 0 | 44 |
| | | Hi!
I have a question about computer beeps. I have just bought some
computerparts and built a P4 2 GHz.
MS 6585
P4 2 GHz
512 mb ddr PC2100
Hitachi...
Yvonne
|
12-09-2005 04:18 PM
dawg | 6 | 47 |
| | | I want to play around with ramping up a HP Pavilion WinXP P4 2.6 machine
with a typical limited BIOS but have done some searching for this OEM
board...
dscotts
|
12-08-2005 08:03 PM
dscotts | 2 | 26 |
| | | Hi all,
Sorry not sure if right for this forum but assume you guys will have the
technical kmnowledge.
If I install a pc game on a USB external...
Unwanted Gift
|
12-08-2005 06:42 PM
Carl | 6 | 36 |
| | | Hi guys, now I've another question, to be more exact, one friend of mine ;)
He has ECS group mainboard (L7S7A2) and amd duron 1.5GHz. Today I have...
Yandos
|
12-07-2005 02:22 PM
tod | 1 | 22 |
| | | I was wondering what these lines in Everest Home edition mean:
Processor Properties: Manufacturer Intel External Clock 100 MHz Maximum
Clock 1000...
news.rcn.com
|
12-06-2005 04:57 AM
David Maynard | 6 | 32 |
| | | Give more information. The Pentium (it was never called Pentium I) could be
anything from a Pentium 60 MHz to a Pentium 233. And then there is...
Phil Weldon
|
12-04-2005 07:20 PM
~misfit~ | 2 | 28 |
| | | Can anybody tell me if my graphic card is 1.5v or 3.3v and how I can find
out this myself next time around??
It is a Geforce 3 winfast titanium 200....
Yvonne
|
12-03-2005 04:34 PM
Bob Knowlden | 1 | 23 |
| | | Hi
I have an AMD 64 3000 939 and i was interested in know how much i can
overclook it with the AMD fan that comes with the CPU.
Ozy
|
12-03-2005 02:38 PM
dawg | 1 | 32 |
| | | I picked up the pata version of the Maxtor 300/16 and have not installed it
because I have not been able to find out much about it. This drive is...
JB
|
12-02-2005 12:38 AM
Augustus | 1 | 22 |
| | | Hi,
I just wanted to get an idea as to what type of case you would
recommend for this system. I wasn't too concerned until I saw the Wind
Tunnels...
SteveSch
|
12-01-2005 05:57 PM
Phil Weldon | 1 | 22 |
| | | If anyone is running an Abit IC7-G (preferably Max II or III) with
Zalman's CNPS9500 LED or CNPS7000Cu/AlCu, or Thermalright's
SI-120 or XP-120,...
Glen
|
12-01-2005 02:05 PM
TomG | 4 | 56 |
| | | For a new computer.
I hope Phil or someone has some
input on this.
What I want to do is, use copper pipes, combined
with one or 2 Peltiers.
The...
Dennis E Strausser
|
12-01-2005 01:17 PM
Dennis E Strausser | 14 | 38 |
| | | I have a Soyo 7VCA-2 motherboard with a 750 Mhz processor. I'd like to try
to overclock it, but I the changes I've been randomly making to the bios...
Lawrence Bouton
|
11-30-2005 12:24 PM
Phil Weldon | 1 | 22 |
| | | I'll have a section up soon on my site
for Overclocking.
+
A forum.
I want posted any and all subjects having to
do with...
Dennis E Strausser
|
11-29-2005 09:36 AM
Dennis E Strausser | 0 | 28 |
| | | It's been well over a year since I opened the case on my P2B-DS Dual
1.4Ghz P3-S system, and it has been running 7x24 without a glitch.
Last weekend...
P2B
|
11-29-2005 12:21 AM
David Maynard | 1 | 25 |
| | | Hello, I mostly play games, I have an off the shelf Gateway with an
Athlon 64 3400+, 1GB Ram, and a BFG 6800OC 128MB AGP Video Card. This
setup games...
jerryeveretts
|
11-28-2005 02:37 PM
Glen | 1 | 20 |
| | | One place where I used to work used clear looking axle grease. This
was after one guy, with a physics degree, made some tests of various
heat sink...
Glen
|
11-26-2005 02:52 PM
- HAL9000 | 4 | 25 |
| | | 'Daniel Böhmer' wrote, in part:
The Pentium III has thermal diode in the chip. Two pins on the CPU allow
access to this temperature sensing diode...
Phil Weldon
|
11-25-2005 01:46 PM
Phil Weldon | 7 | 20 |
