| | Rating Thread /
Thread Starter | Last Post  | Replies | Views |
 |  | Hello,
I have bought a HP test equipment build with a hard disk inside.
The test equipment is a logic analysis system HP 16500C designed in...
astalor
|
01-07-2007 10:25 AM
Conor  | 1 | 8 |
| | | Hi,
I just got through trying to install a totally new system on an Intel
blkd975xbx2kr .
I get a an error at start-up which is PXE-E61 media test...
SRT
|
01-07-2007 08:03 AM
Brownz \(Mobile\) | 9 | 10 |
| | | Hello,
Anyone know of a PC cases manufacturer that makes a case that looks like a
MAC G5 case. I recall seeing such a case (for PCs) some 18 months...
Ricky
|
01-07-2007 03:15 AM
Ricky | 0 | 11 |
| | | Hi!
I have a problem that is driving me crazy. It is a problem that returns all
the time. Almost everytime when I remove a harddrive and try to...
Susanne
|
01-05-2007 03:45 PM
Andrew Smallshaw | 5 | 20 |
| | | MB: msi k8t800 pro with via chipset, realtek audio 97 sound card
(onboard)
HDD: WD CaviarŪ SE16 SATA Hard Drives 250 GB, 300 MB/s, 16 MB Cache,
7200...
mayton
|
01-05-2007 02:22 PM
mayton | 2 | 13 |
| | | After I installed fresh windows xp(sp1) copy on my new wd sata hard
drive. My MB is msi k8t800 pro with via chipset. I have installed sata
drivers...
mayton
|
01-04-2007 12:39 AM
Paul | 2 | 9 |
| | | Vista comes on a DVD, requiring a bootable DVD drive. How is that done
for a new build? If I install a DVD drive, say Lite-On or LG, and set
bios to...
sdeyoreo@hotmail.com
|
01-03-2007 10:22 PM
Clint | 14 | 19 |
 | | "John Whitworth" <sexyjw (AT) gEEEEEEEEEmail (DOT) com> wrote
Thanks! :-)
Cyber
|
01-03-2007 09:35 PM
kony | 20 | 21 |
| | | Here is a simple question re the new power supplies that are currently
about that have a 24 pin split connector block. I was under the
impression...
scully
|
01-02-2007 03:46 PM
scully | 4 | 10 |
| | | I am going to swap out an MSI K8N neo platinum with and AMD 64 2800 ( 2x512
Micron Ram) and my 9800Pro( 128) AGP video card.
I want to go to a core 2...
your name
|
01-02-2007 11:35 AM
your name | 3 | 8 |
| | | On Tue, 2 Jan 2007 10:50:10 -0000, "John Whitworth"
<sexyjw (AT) gEEEEEEEEEmail (DOT) com> wrote:
Any Athlon era or newer CPU can be fried if...
carm
|
01-02-2007 07:03 AM
kony | 5 | 11 |
| | | hi im running windows xp,and i use firefox as my internet browser.every
time i get on the internet i get these little pop up boxes and they say
your...
carm
|
01-02-2007 03:28 AM
kony | 5 | 8 |
| | | Michael Cecil <macecil (AT) gmail (DOT) com> wrote in
news:JeCdnaEwUaWmzg7YnZ2dnUVZ_uTinZ2d (AT) comcast (DOT) com:
I too am a newbie (kind of). So...
carm
|
01-02-2007 01:46 AM
Roy Coorne | 4 | 13 |
| | | I used to build my own computers but that was years ago. I went blind
about 5 years ago (seriously, it's no big deal) and I'd like to give
building...
John Heim
|
01-01-2007 06:42 PM
philo | 3 | 11 |
| | | Hi
Does anyone know how to safely run the output from 2 PCs (or games console)
into one TFT monitor.
I have one with VGA and DVI inputs. I realise...
Conrad
|
01-01-2007 07:01 AM
Ed Medlin | 4 | 11 |
| | | Hello,
Can anyone comment on the quality, stability etc of the ELITEGROUP
K8T890-A MOB.
I built a system in August and since then have had endless...
Adam Smith
|
12-31-2006 03:10 PM
OSbandito | 4 | 16 |
| | | I used to have a system with 2 IDE HDDs which were used for data and backups
mainly. Eventually I was going to use one of them for an alternative OS,...
Martin C
|
12-31-2006 09:59 AM
Clint | 1 | 8 |
| | | I am trying to compare these two AGP video cards. I have Radeon 9600
Pro/256 now. Compusa has the GeForce FX5500/256 I am considering for
an...
geronimo
|
12-31-2006 07:38 AM
geronimo | 4 | 16 |
| | | I have always wondered if there are any heat benefits to just leaving
my case open. I unerstand that when the case is closed air is forced a
certain...
jg
|
12-31-2006 03:11 AM
kony | 7 | 10 |
| | | I'm about to build two computers using a budget that's a hair under
$2000; one of them is going to be a single-core gaming machine
(probably 939...
andrew.gullans@gmail.com
|
12-31-2006 12:53 AM
andrew.gullans@gmail.com | 0 | 11 |
| | | in the bios where do you set for virus protection for the boot
carm
|
12-30-2006 10:58 PM
Rod Speed | 1 | 10 |
| | | I was trying to uninstall an Epson printer driver for the 830U. In
"Control Panel/Add/Remove Programs" there was an item called "Epson
Printer...
Dave Rado
|
12-30-2006 09:38 PM
T Shadow | 4 | 9 |
| |  | Hi everyone!
I am new here and have a quick question: I had to send my ASUS m/b for repair and now am faced with the dilemma of remounting the... pcgurl |
12-30-2006 08:09 PM
kony | 7 | 70 |
| | | CharlesBlackstone wrote:
Even if mixed with PC2700, you will only reach 133MHz on the memory bus.
Al Pilarcik
|
12-30-2006 01:59 PM
Rod Speed | 2 | 10 |
| | | hi i built new computer.i need to know i hook up one cd drive with its
on ide cable and set it to master drive.then i hook hard drive with its
own...
carm
|
12-30-2006 10:51 AM
carm | 2 | 15 |
| | | Hi all,
I have a system that has three GB of 184-pin DDR 400 DIMM (three 1-GB
modules) and a really good AGP video card. Unfortunately, the CPU is...
Adam Corolla
|
12-29-2006 06:33 PM
kony | 3 | 11 |
| | | Hi,
I am presently ordering up pieces for a new system that will run from a wd
150 gb raptor sata drive.
No special needs--a little aimed towards...
SRT
|
12-29-2006 04:47 PM
Rod Speed | 9 | 10 |
| | | Strobe wrote:
I did a repair install and that has helped me get further. However, it
has brought another issue to light. I have a SATA and an IDE...
Enchant
|
12-29-2006 12:27 PM
Enchant | 4 | 9 |
| | | Folks,
I am considering the feasability of building a distributed system out of
a network of low-cost single-board computers.
Physically...
Gavin Brewer
|
12-28-2006 08:59 PM
Bob Fry | 9 | 17 |
| | | HI BUILDING A COMPUTER.I GOT ALL THE PARTS,BUT THERE ONE PROBLEM.MY
COMPUTER CASE AND POWER SUPPLY ARE FOR A ATX FORM FACTOR.BUT I BOUGHT A
MICRO...
carm
|
12-28-2006 06:46 PM
kony | 2 | 12 |
| | | I'd like to overclock the Dell I'll get. Say I get a 6600 cpu in a
Precision workstation.. Is installing the extra cooling possible
without altering...
BillJosephson
|
12-28-2006 06:36 PM
kony | 11 | 23 |
| | | I want a TV tuner for WinME and/or Linux(probably Debian). I want TV in
and out for pc or tv viewing. I also want remote control. And of...
sofasurfer
|
12-28-2006 10:25 AM
Conor | 2 | 16 |
| | | Do u want to make friend with me? If yes, click this link :
http://www.mylot.com/?ref=noyleticia
nong
|
12-28-2006 01:10 AM
nong | 0 | 12 |
| | | If u friendly, click this link :
http://www.mylot.com/?ref=ebnong
nong
|
12-28-2006 01:08 AM
nong | 0 | 15 |
| | | Tsunami dah datang ke dalam akaun anda. Untuk keterangan lanjut, sila
layari
http://www.TsunamiWang.com/?ref=khim
nong
|
12-28-2006 01:07 AM
nong | 0 | 20 |
| | | MoBo:p5NSLI
CPU: pentium D
PSU:Enermax
Ext Video card: PCIexperess Nvidia GeoForce 7600 GS
RAM: Kingston pc5300 667MHZ 512MB RAM
My Problem:
When I...
hariramasubbu@gmail.com
|
12-26-2006 11:25 PM
Rod Speed | 6 | 15 |
| | | Building a new system for Windows VISTA ( i have release candidate 1).
I'm only using 1 SATA hard drive, so I can't set up a RAID array. But
I don't...
sdeyoreo@hotmail.com
|
12-26-2006 06:00 PM
kony | 1 | 10 |
| | | Any ideas?
I have a new kit w/machspeed p4msd-800 motherboard. When power is
turned on - just as the fans begin to spin, the power turns off.
I've...
public@rappaport.name
|
12-25-2006 12:46 PM
unclefrank24@gmail.com | 4 | 8 |
| | | Hi all ,
Please help me out .
Connected 20 pin and 12V Power supply cables to MoBo
Connected CPU fan to the righ socket in MoBo
Switch on...
hariramasubbu@gmail.com
|
12-25-2006 09:43 AM
hariramasubbu@gmail.com | 5 | 8 |
| | | Hello, I'm curious about how RAM prices have fluctuated. I would like
to see a graph of prices, does anyone do this? Maybe I can predict a
"low"...
BillJosephson
|
12-22-2006 12:37 AM
Rod Speed | 6 | 7 |
| | | I just built a new computer, and when I turn it on, it turns off in about 4
seconds. I hear a longish beep, and all 4 fans in the system are...
Jack Bruss
|
12-21-2006 12:35 AM
astein34@hotmail.com | 39 | 44 |
| | | Hi,
I'm trying to assemble my first homebuilt PC. The parts I'm using are
as follows:
Motherboard: ASUS M2N-MX, AM2, SATA-II
CPU: AMD Sempron 64...
wisccal@googlemail.com
|
12-21-2006 12:33 AM
astein34@hotmail.com | 5 | 15 |
| | | I have an interesting problem. With XPSP1, the computer boots into XP with
L2 Cache enabled. With XPSP2, it does not. The system is:
PCChips...
mdp
|
12-20-2006 11:19 PM
mdp | 8 | 17 |
| | | I'm about to build my first computer, probably with an AMD 64 chip on
an ASUS board. I've started looking at RAM options and notice that some
run at...
Dave S
|
12-20-2006 04:35 PM
kony | 4 | 11 |
| | | Hello,
We purchase small to medium sized lots of Cisco equipment.
Routers, switches, ip phones, modules.
Feel free to email me a list.
Thank...
ciscohw
|
12-20-2006 10:26 AM
ciscohw | 0 | 12 |
| | | Hi.
I have an old Toshiba Tecra 8000 with no CD drive and running DOS.
I'd like to install linux, and figure that the best way would probably
be...
Wombolt
|
12-19-2006 06:38 AM
Lasse Jensen | 2 | 11 |
| | | Well, everyone was a beginner once. I am connecting a Seasonic 500w PS
to my Gigabyte DS3 board.
This mobo has a 4 pin ATX_12V connector, and a 24...
Jonathan Currie
|
12-19-2006 05:28 AM
Paul | 12 | 15 |
| | | "Jon Danniken" <jonREMOVETHISdanniken (AT) yahoo (DOT) com> wrote
This is how I ended my original post:
"My questions are:
"Did I miss anything?...
Neil Harrington
|
12-18-2006 06:28 PM
Neil Harrington | 19 | 20 |
| | | Hi there,
I'd like to assemble a "media centre" pc to view dvd's, internet tv, etc.
I guess I'd need a video card with tv-out, as I'll have just...
HamRadio
|
12-18-2006 02:38 AM
Lasse Jensen | 3 | 10 |
| | | I got a computer for my son, a new emachine. It worked fine. Then I
pulled out the memory and HD to use. When I put it back in, I got a
CMOS/ GPNV...
Eric Kent
|
12-18-2006 01:48 AM
Plato | 4 | 12 |
