Would anyone care to advise on how I can get the USB port of my Aptiva
2139E5D, Windows98,to recognize a flash drive?
Thank you!



----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----

Does your Flash drive require USB 2.0? If so, you are out of luck with
the current USB on your system. You may be able to find a USB card
somewhere with 2.0 ports and install it in your system.

Mike

Be sure the USB has been enabled. Go to Control
Panel ... System ... Device Manager. There should
be an entry near the bottom ... Universal Serial Bus
controllers.

If it's not there, go into the BIOS and make sure it
has been enabled.




If you haven't installed the driver for the flash drive,
use this one instead:

Maximus Decim Native USB ver.2.2
------------------------------------------------------------------------
Only for Windows 98SE English !!!
Native (without installation of additional drivers
for each type) support USB flash drives, digital
photo and videocameras and other similar devices.
Remember! You install it at own risk!
Before installation remove ALL of driver
USB flash drivs, available in system.
What's new?
1.Fixed bug "USB Diagnostic Device"
2.New devices are added.
------------------------------------------------------------------------
http://rapidshare.de/files/1217842/nusb22e.exe.html