I have an Acer DUW1616ARR Dual layer DVD\RW-CD\RW drive. It's the only ata
drive on my system and it's set as slave on IDE 0
My Hard drive is a WD 1600js sata II on SATA 0.
The DVD drive is holding up the whole system at boot up.Seems like it adds
almost a minute to boot time.It won't finish booting until the drive spins
down.
Is this typical?

don't look <don't look (AT) worldnet (DOT) att.net> wrote:

Nope.

Previously don't look <don't look (AT) worldnet (DOT) att.net> wrote:
Not really. Unless you have a) enabled CD/DVD boot and b) have a CD/DVD
in the drive which looks bootable. In that case the booting is
handed over to the bootcode on the CD/DVD and the system can do
nothing about that. If the bootcode needs a minute to decide that
the CD/DVD is not really bootable, then that is it.

Advice: Disable boot from CD/DVD in teh BIOS. You can re-enable
it should you need it in the future.

Arno

Jumper the Acer as master.

On Fri, 27 Apr 2007 21:46:20 GMT, "don't look" <don't
look (AT) worldnet (DOT) att.net> wrote:

In article <MauYh.374885$5j1.169135 (AT) bgtnsc04-news (DOT) ops.worldnet.att.net>,
don't look <don't (AT) look (DOT) ?.att.net> writes

Bad move. Set it as master.

Almost certainly because the drive is jumpered as slave.

--
(\__/) Bunny says NO to Windows Vista!
(='.'=) http://www.badvista.org/
(")_(") http://www.cs.auckland.ac.nz/~pgut00...ista_cost.html
http://www.theinquirer.net/default.aspx?article=38926
http://www.schneier.com/crypto-gram-0702.html#8
http://www.theinquirer.net/default.aspx?article=39051
http://www.theinquirer.net/default.aspx?article=39087
http://www.theinquirer.net/default.aspx?article=37091
http://www.theinquirer.net/default.aspx?article=36653

Ah here it is.Thanks Andy,did the trick. Cut boot time by more than half.
Couldn't find this post on the AT&T server,but here it is in Verizon server.


"Andy" <1@2.3> wrote