Is there such a thing as a PC card interface that would plug in to a PCI slot? I am thinking about going completely wireless at home and using one...

mr.sandog@gmail.com

05-13-2007 04:47 AM
conan

How long it takes for the power on the PCMCIA PC Card Bus to ramp to full voltage (+3.3V & +5V)

eza@excalibur.co.il

04-19-2007 07:41 AM
eza@excalibur.co.il

I was under the impression that PCI interface chips/bridges can be used for cardbus but now I'm not sure. I'm waiting for Volume 9 of the spec but...

alexh1@sbcglobal.net

03-29-2007 07:57 PM
alexh1@sbcglobal.net

I'm reviewing a PCMCIA hardware design done by some consultants and I noticed that the IDSEL on the PCI device is tied high. I have requested the...

alexh1@sbcglobal.net

03-29-2007 07:48 PM
alexh1@sbcglobal.net

Hello. Is it possible for a rogue PCCard to read or write to arbitrary locations in memory (system RAM) without a rogue driver being installed? If...

thabets@googlemail.com

03-07-2007 07:10 AM
thabets@googlemail.com

Hi, We are testing Cardbus with Win XP platform (Toshiba laptop). We have the ccd1 and cvs1 pins connected. ccd2 is grounded and cvs2 is left open....

nagu

01-04-2007 10:55 AM
nagu

I got HAYES optima 336 and have some unexpecting things happening with it. 1. Sometimes my notebook (HP nx6110) doesnt detect it: $ dmesg|grep...

madpython

01-02-2007 03:25 PM
madpython

I've seen some old postings, but nothing recent on this. I have two PC slots on my laptop but want to put in two cards whose exterior connects are...

km@mathcs.emory.edu

12-11-2006 11:57 AM
km@mathcs.emory.edu

Hi, I have an embedded application that runs under XP and is using a SRAM PC Card. I have battled through many PC Card driver issues and such and...

jk14

11-10-2006 12:58 PM
MG

Can anybody recommend a PCMCIA to USB adaptor that will work in my G3 Powerbook ? Are drivers needed and where can I download them from if...

BW Moore

11-09-2006 03:43 AM
BW Moore

Hello, I have a Sandisk SDP3B 1GB flashdisk card, of wich you can see a...

philippefimmers@gmail.com

10-13-2006 06:44 PM
dhinds@sonic.net

In the PCMCIA (CardBus) specification, it is mentioned that the time elapsed between power good to deassertion of RST# signal is 1ms. Is there any...

ronycharly@gmail.com

10-12-2006 07:15 AM
ronycharly@gmail.com

We are building a WAN ExpressCard and are looking for a PCI Express interface chip. Any information on sources is greatly appreciated. Regards, Mike

michael.mcentee@interdigital.com

09-27-2006 12:25 PM
michael.mcentee@interdigital.com

Hi Everybody, I downloaded pcmcia-cs-3.2.8.tar.gz file and installed in our Linux PC( RedHat Linux Ver 9.0 and kernel version 2.4.20-8) In...

mahinder_gudur@yahoo.com

09-04-2006 02:32 PM
mahinder_gudur@yahoo.com

Hi, We have developed Windows WDM driver for our PCMCIA 16 bit PC card. Our card is working in all the wondows systems perfectly with our...

mahinder_gudur@yahoo.com

08-31-2006 06:23 AM
mahinder_gudur@yahoo.com

We are looking to buy a PCMCIA data acquisition card. It looks as though they can be had for US$500-$1000. Any suggestions as to what to buy or...

Charles

08-15-2006 05:36 PM
Charles

Can anyone recommend a high quality cardbus (PCMCIA) Firewire/USB adaptor for a PC notebook (Lenovo T60p)? You plug it into your PCMCIA slot and you...

AT

08-08-2006 11:54 AM
Matt The HepCat

Hello from Italy and sorry for bad english. I have a Fujitsu-Siemens Amilo M1437 without a PCMCIA slot. How can I use my Vodafone Connect Card? I...

cardinale Albornoz

07-31-2006 04:55 PM
cardinale Albornoz

Hi: I recently bought Dell Inspiron 6400 not realizing it doesn't come with a full PCMCIA slot. I have a Type II PCMCIA card I need to use with...

Russ

07-14-2006 07:52 PM
Russ

I just got an type II PcCard that will not fit in my type II slot. Surprise ! There happen to be a notch on the side that is too thick to get in my...

Volny DE PASCALE

07-07-2006 09:48 PM
tim majoch

Hello! I'm Brazilian, and I'm having serious troubles to find a place to buy a PCMCIA SRAM CARD OF 2MB capacity. I'll use this device in a industrial...

fcamatti

06-26-2006 11:42 AM
fcamatti

I have a Belkin Hi-Speed USB 2.0 Notebook Card on a Windows XP laptop. I have installed the latest drivers from the CD, in the correct way as stated...

Dan Owen

06-20-2006 01:54 PM
Dan Owen

Background: I have: 1) An ancient IBM 701c (butterfly)laptop 2) A Xircom RealPort Cardbus Ethernet 10/100 card. The card doesn't fit in the PCMCIA...

Greg Hamblin

06-18-2006 07:48 AM
Greg Hamblin

Hello all, what are the voltage levels to be set for VCC, VPP1, VPP2, VS1 when the cardbus is connected into the host socket. My cardbus host...

praveen.sethuram (AT) gmail (DOT) com

05-20-2006 12:03 AM
praveen.sethuram (AT) gmail (DOT) com

I have a Panasonic PCMCIA cdrom (KXL-808A) and I cannot get it to work with Wxp .. does anybody know of some drivers or how I can do it. Secondly,...

Bob

05-12-2006 06:25 PM
AT

I've got an old laptop I'd like to do something useful with, but it only has pre-Cardbus PCMCIA slots. If I plug in a modern Cardbus-based card,...

billstewart

05-09-2006 11:06 AM
Mike Y

I don't even really need Cardbus, ordinary PCMCIA would be sufficient, just to keep using old-generation DSLR's on the road, on a PC or tablet...

Willem-Jan Markerink

05-08-2006 04:24 PM
MMI

"Brian Devine" <devine (AT) g2ss (DOT) com> wrote in news:rqidndiHI9wlMrzZ4p2dnA (AT) nethere (DOT) com: While searching for a portable PCMCIA->USB...

Willem-Jan Markerink

05-01-2006 03:17 AM
Willem-Jan Markerink

domain for sale: internetdotcoms.com http://www.afternic.com/name.php?id=11866440

internetDotComs.com

04-16-2006 06:30 AM
internetDotComs.com

Just a stupid question. I've got an accelerometer, a gain, and a National Instruments PCMCIA (mod. 6024E) hardware. PCMCIA bus is connected to a...

Tiffany

04-08-2006 08:57 PM
tim majoch

I am hoping somoene can help me solve the riddle behind this issue... I have an IBM (Lenovo) T41 Laptop running XP Pro... I have a Wireless LAN...

icarus.agenda@gmail.com

04-03-2006 12:26 PM
icarus.agenda@gmail.com

I am trying to access a 16-bit PC-Card through a Cardbus controller. I do this on an Windows XP platform with an RTX (Hard Realtime sub system)...

Kim Stubberup

03-29-2006 10:29 AM
Mike Y

Hi folks, Bit of an obscure one: Does anyone have an archive of old Intel datasheets? I'm trying to find a sheet for Intel Flash Series 2+ memory...

Ben Weaver

03-28-2006 08:04 AM
Ben Weaver

I am trying to write a 802.11 CF driver. I have a driver for 802.11 PCMCIA. WHat modification is necessary to convert the existing PC Card driver to...

RHINE

03-19-2006 10:16 PM
RHINE

I have a Compaq Presario 1200 notebook running Windows 2K Pro with an aging battery. Yesterday the battery went dead without me noticing. When...

Sam

03-16-2006 07:15 PM
Sam

I recently purchased this microsolutions pcmcia card in hopes that it would work with a Motu Express XT (midi hub) and i've downloaded the drivers...

spencer@itiswhatitisrecordings.com

02-23-2006 01:35 AM
spencer@itiswhatitisrecordings.com

I have a Dell 2650 laptop that I plan on putting on a home network. Don't know the pros/cons of PCMCIA vs. USB when it comes to nics. Can anyone...

Tiny Tim

02-16-2006 09:31 PM
Regal53

I have designed a cardbus Module that acts as a cardbus slave for configuration access and then acts Cardbus Master that reads and writes data into...

Pranks

02-12-2006 04:57 AM
Pranks

I have an old 16 bit ISA PCMCIA card reader that I am trying to get working in an XP box I just built. The reader is a DataBook PI-2300, DB86082B...

Scarletdown

01-31-2006 09:12 PM
Scarletdown

How to Write resources from CIS of a PCMCIA CF Card from an NT DDK driver? Thanks in advances.

noah538@mail2000.com.tw

01-21-2006 04:21 AM
noah538@mail2000.com.tw

Hi I need to get the two-tone sound that is played by a PCMCIA card when it is plugged in (down-up), and when it is plugged out (up-down). Would...

Root canal

01-19-2006 04:53 PM
Root canal

got already two pcmcia-cards running fine on it: a 56k-modem and a 10mb-combo-network-card (am using win98se: system-manager (subsection properties)...

Thomas Ziegler

01-17-2006 11:01 AM
Thomas Ziegler

Hello -- After installing W2000 SP4, the PCMCIA slot no longer works. The PCMCIA Adapter shows up in the Device Manager with 2 entries for Texas...

L Mehl

01-16-2006 03:48 PM
L Mehl

I have a card that needs to be formatted in DOS using a file called tcformat.exe. It is part of an old CardTalk utilities. If anyone knows where I...

Ed H

01-10-2006 05:57 PM
Ed H

HELP, HELP, HELP.!!! I am totally frustrated searching for a solution to my problem. My problem is this........ I purchased a new notebook without...

Billy Boy

12-28-2005 09:53 PM
Billy Boy

Hi Everybody, Our PCMCIA 16 bit PC card(with WDM driver) is generating Interrupts properly and in the Interrupt service routine we are servicing...

mahinder_gudur@yahoo.com

12-27-2005 09:57 PM
mahinder_gudur@yahoo.com

Looks like there is no path to wireless using a type I slot. In looking for NIC I came across the (old) 3COM 3CCFE574BT. This card is described as...

Norman Goldsmith

12-26-2005 07:56 PM
dhinds@sonic.net

Can anyone suggest a path that will let me add wireless to two old laptops that have only a type I slot and no USB? Thank you, Norm

Norman Goldsmith

12-23-2005 12:00 PM
Norman Goldsmith

We recently purchased a number of wireless cards for our notebook computers, but since it protrudes so much, each user must remove the card before...

dwilt@historyassociates.com

12-21-2005 02:48 PM
dwilt@historyassociates.com

Hi all, 1)I want True IDE specifications and details on TRUE IDE. can anybody give some URLs. 2)Is PCMCIA-ATA and TRUE IDE are same? I googled it...

prasi

12-21-2005 12:12 AM
prasi