HighDots.NET Computer Hardware Forums  

Sponsored Links


PCMCIA PCMCIA Peripherals Discussions(alt.periphs.pcmcia)


Discuss in the PCMCIA forum.



Post New Thread
Threads in Forum : PCMCIA Forum Tools Search this Forum
  Rating Thread / Thread Starter Last Post Reverse Sort Order    Replies         Views     
I have a spectrum analyzer (Advantest U4941) with a PCMCIA slot. Can I use a PCMCIA/USB adaptor card and send data to a USB memory...
Jim Costello
06-23-2004 02:54 PM
dhinds@sonic.net Go to last post
1 44
Hi folks, I am using a pcmcia stack on MIPS, running with PCMCIA Ricoh chip R5C475 and CF storage card. I got a very strange thing that I cannot...
VU Khac
06-21-2004 03:56 PM
VU Khac Go to last post
0 27
We have a MPC8250 based board that has a TI PCI1410 PCI-PCMCIA controller which interfaces with the PCMCIA socket where a wireless modem AirCard 750...
samraj
06-16-2004 12:14 PM
dhinds@sonic.net Go to last post
1 25
I ordered a 56k PCI card modem when I built a system for my friend but instead they send me PCMCIA modem card for the laptop. I decided to keep...
xwingsMan
06-14-2004 12:29 AM
dhinds@sonic.net Go to last post
1 26
Hi, I am trying running pcmcia on mips and got some problem of memory mapping. On mips, the memory windows start at the physical addresses that are...
VU Khac
06-12-2004 04:40 PM
VU Khac Go to last post
8 26
I have a dell inspiron notebook,600mgz celeron,latest bios,256m ram,fresh reinstall win 2k svc pk 4,all latest drivers. Have following problem with...
a
06-11-2004 02:52 PM
a Go to last post
0 34
I have a dell inspiron notebook,600mgz celeron,latest bios,256m ram,fresh reinstall win 2k svc pk 4,all latest drivers. Have following problem with...
Julie Quetel
06-10-2004 03:24 PM
Julie Quetel Go to last post
0 30
How do I erase the non-file data from a smart media card? I erased all the files and folders, but seem to still have some thing still stored on...
Eugene Rippen
06-08-2004 02:22 PM
Eugene Rippen Go to last post
0 30
Hi, I heard Memory mapped address range for ISA bus is 16 MB. But how to access that much range.I want to allocate 4MB address range for my pcmcia...
Yugender Reddy
06-07-2004 02:10 AM
dhinds@sonic.net Go to last post
5 27
I'm working on a project using these old wireless modem PCMCIA cards for a non-network re-use. Here is a link to a scan of the de-shelled PCMCIA...
Ike
06-06-2004 12:25 PM
Ike Go to last post
0 30
Hi! I am responsible for my PC Card hardware design and the driver associated. I want to know the proper interrupt handling of...
Panda Ng
06-02-2004 10:42 PM
Panda Ng Go to last post
0 37
Hello: I have a flash memory Intel Series 2 that belong to a GPS cartography and data. My intention is to modify these data from Linux. The Adapter...
Carmelo Nombela
06-02-2004 12:06 PM
Fernando Acero Martin Go to last post
6 26
I am using a 32MB Sandisk CF card connected as an IDE device to boot NWDOS in an embedded system. I would like to be able to master these cards in a...
Bob Koblish
05-23-2004 07:03 PM
Pavel A. Go to last post
1 39
We are looking for shop to buy SRAM PCMCIA cards. According to the site http://www.gefanuc.com/support/cnc/3551.htm we could use for example...
Miguel
05-19-2004 11:04 AM
Miguel Go to last post
0 34
Hello, I've recently posted a message about problems with WIN2000 and resource assignment for a Cardbus Card, which I have developed. It requests a...
maier
05-17-2004 03:38 PM
Pavel A. Go to last post
1 34
I have a Compaq Netelligent (or so) PCMCIA ethernet adapter which needs one of those adapters to plug the RJ45 cable in. This adapter actually seems...
Andreas Peter
05-17-2004 01:10 AM
Andreas Peter Go to last post
2 32
Hi, can anyone help pinpoint the problem area? I have a Gateway notepad computer. It has a Xircom RealPort PCMCIA card. Yesterday the computer...
John
05-15-2004 09:54 AM
post Go to last post
1 44
Dear specialists, I have an Inspiron 5100 Dell (2,4 Mhz Intel, about a year old) with a TI4410 CardBus Controller, driver 5.1.2600.0 (signed by...
post
05-15-2004 09:51 AM
post Go to last post
3 47
Hey Are you experienced with the PC Card standard? I have a PC card (16 bits) and want to use both the WP (pin 33) and IREQ (16) signals, when in...
J?rgen Helgheim
05-13-2004 11:54 AM
J?rgen Helgheim Go to last post
0 26
Dear Readers, There seems to be a problem with the TI 4410 PCMCIA bus drive. I found severall reports on the net about simular problems i am facing...
post
05-04-2004 03:24 PM
post Go to last post
0 27
Hey 1. I have implemented CIS in Common memory (1KB Dual SRAM). 2. CISTPL_CONFIG and CISTPL_CFTABLE_ENTRY are used to configurate the card. 3. I want...
J?rgen Helgheim
05-04-2004 07:03 AM
J?rgen Helgheim Go to last post
0 30
I´ve got a problem installing an old PCMCIA Modem on an old Laptop running XPpro. With Win98 the same modem on the same laptop runs just fine. The...
Karina Salmen
04-30-2004 06:45 AM
Karina Salmen Go to last post
0 32
Hello ! i am looking for a "converter" from PCMCIA Card to RS232 something to plug on the PCMCIA Card which will convert it to RS232 i hope i...
Patrick S
04-29-2004 10:37 AM
Mike S. Go to last post
1 34
I have a 4 meg PCMCIA flash card. This card came out of a Cisco 1005 router. I'd like to be able to examine the data on the card to see if it is...
Noozer
04-29-2004 01:58 AM
Noozer Go to last post
0 32
My out-of-warranty Dell Inspirons modem doesn't work, and I thought of using a PCMCIA modem. The Xircom Realport Modem 56 looks like it has a better...
HANSTEIS
04-28-2004 05:55 PM
HANSTEIS Go to last post
0 29
I originally posted this on microsoft.public.development.device.drivers. The results of that post are at the bottom. ------- I've got a custom PCMCIA...
JudyL
04-26-2004 04:30 PM
JudyL Go to last post
0 23
Hello, thanks a lot for this input. I tried this and it works well, the host system sees a normal PCIbus card. Unfortunately, the hot plug and unplug...
maier
04-22-2004 09:10 AM
maier Go to last post
3 40
I have a 32 bit cardbus network card (realtek chipset) and am running 95c on my laptop to use the built in DVD decoder card. When I install the...
hockeygod
04-20-2004 02:57 PM
Pavel A. Go to last post
1 28
Hi Folks, WindowsXP usually ends with a bluescreen after i tried to access data from a linear flash card. Without service pack 1 installed...
Mike
04-20-2004 09:13 AM
Mike Go to last post
0 30
Hello, I installed a PCI to PCMCIA adapter card into my desktop so I could then use my wireless card to access my wireless network. I understand...
DBM
04-18-2004 09:19 PM
Len Moskowitz Go to last post
1 36
Hi, Am having accurite pcmcia prototype card with me.I want to develop device drivers for that card in windows NT 4.So in ISA mode I developed...
Yugender Reddy
04-14-2004 02:05 PM
Pavel A. Go to last post
1 25
hi i have just installed Vectorlinux on my laptop, it worked fine except the pcmcia slots, on start up i get: cardmgr: no driver in /proc/devices so...
the giffo
04-14-2004 01:57 PM
Pavel A. Go to last post
1 45
Analog/Digital (USA) PCMCIA Modem - Is there such a thing?
ChNomad
04-13-2004 08:55 PM
ChNomad Go to last post
0 30
Rita, I am trying to leverage an existing 16 bit wireless PC card with an old desktop so I went and bought a PCI-PCMCIA adapter made by Enterasys...
DBM
04-06-2004 11:53 AM
DBM Go to last post
0 42
Hi, I was wondering if anyone can point me to any information about the market size of PCMCIA cards (current or latest information available would...
gpv
04-04-2004 09:51 PM
gpv Go to last post
0 30
Hi, I have a huge problem with my wireless pcmcia card (D-Link DWL 650+) on my Compaq Presario 1700 (ME). I installed all the latest drivers and...
Daniel Holden
03-07-2004 08:37 AM
Daniel Holden Go to last post
0 43
I want to add a USB 2.0 PCMCIA card to my Inspiron 4000 which only has an USB 1.1 port. Are there any DOS drivers that I can add to Ghost 2003...
Proudtower
03-06-2004 11:24 PM
Proudtower Go to last post
0 54
Hello, I have a Sony VIAO notebook with a single PCMCIA slot. I left a Netgear 802.11b card in the slot while transporting the notebook and had...
Steve Fischer
03-06-2004 03:44 PM
Steve Fischer Go to last post
0 27
I've got an old Compaq LTE 5200 running windows 98 and want to upgrade this notebook for the use with usb. So I got an 32-bit USB CardBus card...
Andreas Peter
03-05-2004 07:35 AM
HH Go to last post
3 33
Hi, I am about to have a CompactFlash slot in my new hardware design and I am a bit confused about the different modes of operation in various CF...
Gunnar Alm
03-04-2004 08:33 AM
Pavel A. Go to last post
1 23
I have plugged a PCMCIA SRAM Memory Card in my Toshiba notebook. The computer detects it fine. How do I read the contents of the card? Thank you!
Leonardo
03-01-2004 12:54 PM
Leonardo Go to last post
0 42
I recently took apart my Thinkpad A20m to replace the processor after not using the computer for a month. Afterwards, my Linksys Wireless card...
Joe
03-01-2004 01:32 AM
dhinds@sonic.net Go to last post
1 32
Juan M Santiago Burruchaga <JBURRUCHAGA (AT) terra (DOT) es> wrote: Ok... looking at 2.6.3 it isn't obvious to me why that would be true but I...
dhinds@sonic.net
03-01-2004 01:26 AM
dhinds@sonic.net Go to last post
2 33
I have "inherited" my daughter's Toshiba Satellite 2505CDS laptop (bought for her years ago, since replaced). I wiped Windows 98 off it and have...
Howard and Celia Modell
02-29-2004 04:04 PM
Howard and Celia Modell Go to last post
4 29
Hi, I succeed in reading the CIS of my PCMCIA card. I whould like to know where I can find the size of my CompcatFlash memory car in the slot PCMCIA,...
rodolphe
02-27-2004 11:47 AM
dhinds@sonic.net Go to last post
1 28
Hello, does anyone know from problems with Xircom ethernet cards? I have a Xircom CEM2 card and a laptop with win 95 B as os. The card don't want to...
jim
02-26-2004 09:59 AM
jim Go to last post
0 35
Hello all, I need to detect the BVD1/BVD2 status under Windows (XP/2000) for SRAM cards. Lots for Linux, but no examples for Windows. Any ideas? ...
Lister
02-25-2004 08:20 AM
Lister Go to last post
0 29
I have two pcmcia cards from a diagnostic machine which I wish to backup I am unable to read them in my laptop. Is there any software that can be...
Apples
02-24-2004 01:39 PM
Pavel A. Go to last post
1 26
Hello, I got this PCMCIA scsi card reader for an RS6000, with the nifty idea of using it to directly read my flash card from my camera to my...
73blazer
02-23-2004 09:36 AM
73blazer Go to last post
0 45
Are there any PCMCIA sound cards that will work in WinXP? Thanks
-
02-21-2004 02:23 PM
- Go to last post
0 32
Post New Thread

Display Options
Showing threads 151 to 200 of 299
Sorted By Sort Order
From The
Forum Tools Search this Forum
Search this Forum :

Advanced Search

New posts New posts More than 15 replies or 150 views Hot thread with new posts
No new posts No new posts More than 15 replies or 150 views Hot thread with no new posts
Closed Thread Thread is closed  
 
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Powered by vBulletin Version 3.5.3
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.