I know 16bit cards work with 32bit slots, what about the reverse? If I put a 32bit card into a 16bit slot (older notebook), will it work? I'm about...

Peter

11-09-2003 01:44 AM
Johnnie Leung

I have an Asus WL-100 pcmcia wifi card that I am trying to install on a Compaq Armada 1130 laptop with Windows98. I have verified that the card works...

Frederick Bryan

11-08-2003 04:36 PM
Frederick Bryan

Who make such a PCMCIA interface to this kind bus, that is GBIP or same as IEEE-488. Many thanks

Caregln

11-04-2003 01:35 PM
tim majoch

Is there a PCMCIA card to Midi does anyone know? Or will a Midid to USB work through a USB to PCMCIA CardBus card?? I have no USB port on my...

MG

10-27-2003 01:23 AM
MG

I have a USB FlashReader from Quatech, PCD-U, which supports a 16Mb PCMCIA PC Card from SanDisk. The cards that I need to read have NOT been written...

Bill Grigg

10-21-2003 09:31 AM
Bill Grigg

Are there any 3D accelerators that plug into the PCMCIA slot on laptops?

caver99

10-20-2003 12:00 PM
caver99

What are cheapest PCMCIA reader/writer connectors for USB PCs? What interconvert cards exist? I got a USB-CF reader by mistake. But realised too...

vjp2@biostrategist.com

10-19-2003 05:23 PM
vjp2@biostrategist.com

Hi: I'm looking for the utilty software for the PCMCIA Calluna 520 Meg hard drive, model CT521RM called "callunacode" or possibly...

Glenn A. Macala

10-14-2003 10:45 PM
Glenn A. Macala

When I plug my Orinoco Gold 802.11b card into my Thinkpad A31 running Windows 2000 Pro, then boot up the computer, the network software configures...

Spammay Blockay

10-14-2003 08:11 PM
Spammay Blockay

Can anyone help out My card reader isn't working since I upgraded and now I realized I lost my disk 2 of PhoenixCard Manager Ver 4.01 I would be...

Frankly

10-13-2003 07:17 PM
Frankly

Hi, I have Centennial Technologies 8MB Flash PCMCIA card (FL08M-20-11119). I can't use it with WinXP - driver missing or something. I've found some...

M.

10-13-2003 06:43 AM
M.

Is there a company that buys used PCMCIA PC Card Modems? I'm trying to avoid the aggrevation of negotiating a sale. If you know of a web site that...

Arctic Wolf

10-12-2003 04:39 PM
Arctic Wolf

where I can find the driver for RH9.0 for the card PCMCIA Nokia D211. The link of Nokia's site is not correct, and show me any errors I would use...

Cor_Pie\(\)

10-12-2003 08:11 AM
Cor_Pie\(\)

Dear all, I have one big problem with my cardbus PC-card. I developed this card on my own and a collegue developed the driver. The CardBus-interface...

Joachim Mann

10-10-2003 01:20 AM
Joachim Mann

Dear all, I have one big problem with my cardbus PC-card. I developed this card on my own and a collegue developed the driver. Since there were some...

Joachim Mann

10-06-2003 11:24 AM
Joachim Mann

Does anyone please have a web address for help with USB 2.0 carbus? I cannot get my sitecom cardbus to work on my Dell Inspiron 8200 (XP with...

Nicko

09-28-2003 06:42 AM
Nicko

Hi all, OS-Linux 7.3 Redhat Distribution Hardware:- 16 bit Memory PC Card Kernel: - 2.4.18 pcmcia Package: - pcmcia-cs-3.2.4 I am using the...

Shiva Prasad

09-23-2003 06:20 PM
Pavel A.

Have installed the driver for this "Multifunktioncard" on my Sony PCG-505E. However using wvdial to establish a ppp does not work. My first question...

E

09-18-2003 07:32 AM
E

Panasonic LK-RM864DZ PCMCIA LS-120 drive for sale. Box, manual, all accessories plus 2 LS-120 disks included. $20.00, plus your choice of...

Edward Strauss

09-18-2003 05:52 AM
Edward Strauss

Thinking of putting new life in my old Win 98 laptop by getting a USB 2.0 card for the PCMCIA type II slot. Research shows that all USB 2.0 CardBus...

J.Jake

09-17-2003 04:13 AM
neill

I have Netgear MA401 PCMCIA wireless pc card on old '97 laptop. Windows ME. Installed OK & Download latest, think same & lastest firmware I...

Greg Reed

09-14-2003 11:28 AM
Greg Reed

Hi there, i really hope that someone can help me out of trouble.... Since May 2003 I have a Yakumo Q7M Mobilium XD Notebook. I found out...

Hubert

09-12-2003 04:28 PM
Hubert

Does anyone know how, in a program, you can detect when a card has finished installing on windows 2000/XP? I want to hold up installation of...

Zordiac

09-12-2003 05:07 AM
Zordiac

I have mandrake linux 9.1 and try to make the pcmcia option international modem work but I can't. does anybody know how to make it work?...

hatemicrosoft

09-10-2003 02:17 PM
hatemicrosoft

Seems to be only 10 Mbps or 100Mbps/fiber complying whit the NE-2000 drivers.... It has to work on a stand along WindowsCE platform (not...

Joe Blow

09-04-2003 10:51 PM
Joe Blow

Panasonic LK-RM864DZ PCMCIA LS-120 drive forsale. Box, manual, all accessories plus 2 LS-120 disks included. $20.00 plus your choice of...

Edward Strauss

09-04-2003 04:02 AM
Edward Strauss

Hi. Im currently building a embedded PC-System with a PCMCIA reader from AAEON (PCM3115-B) Up till now it worked fine with all PCMCIA cards that I...

stefan.ohrman@ps.ge.com

09-03-2003 11:37 AM
dhinds@sonic.net

dhinds (AT) sonic (DOT) net wrote in message news:<ZFX3b.16687$dk4.547162 (AT) typhoon (DOT) sonic.net>... Dave, you are right - I got two...

mjlabas

08-30-2003 08:19 AM
mjlabas

I have a USB 2.0 PCMCIA card installed in a Sager NP8880 laptop running Win XP Pro. SP 1. P4 2.2, Intel 845 chipset. The card is not recognized...

mchariff

08-27-2003 10:44 AM
mchariff

Hello, I am trying to equip an old thinkpad 560e running under W98SE with a pcmcia-to-usb adapter. I have acquired two different adapters (aten...

theld

08-26-2003 11:43 AM
dhinds@sonic.net

Any opinions about dongles vs. X-jacks vs. ruggedized connection ports? My thoughts: X-jacks: PROS: jack is contained in the structure of the card...

Todd Richardson

08-22-2003 12:34 AM
Jonathan Klein

I am using a new HP notebook running XP home. I have a Flash Storage card ATA-20MB from Simple technology that works well in my digital...

Roland Ashley

08-21-2003 10:26 AM
Roland Ashley

I've been reading a lot about NEWCARD of late. I went to the pcmcia web site, but couldn't find how to get a copy of the NEWCARD specification. Can...

Warner Losh

08-21-2003 05:39 AM
Pavel A.

I misplaced my modem cable and the darn modem doesn't seem to have a make. How predictably standard are those cables and where can I find an...

vjp2@biostrategist.com

08-20-2003 11:13 PM
vjp2@biostrategist.com

Hello from Gregg C Levine Does anyone have a copy of the original DOS based card and socket services collection? I need it for my Dell laptop, and...

Gregg C Levine

08-20-2003 10:31 PM
Gregg C Levine

I am working on interfacing to a cardbus device. I've got all kinds of documentation and books, but I still can't figure out the difference...

Adam Kumpf

08-20-2003 11:39 AM
dhinds@sonic.net

I have a PM-1038 dual slot PC-104 expansion board, it has a ricoh chipset. My pcmcia card services detect it and the modem card that is...

TJ

08-19-2003 05:47 PM
Pavel A.

Hi all, We are trying to develop a cardbus32 hardware. Could someone please help with queries to this relation. What should be the values of CCD1,...

Susaant

08-19-2003 05:40 PM
Pavel A.

I made an ndis2 boot disk for my Xircom IIps using the Ghost boot wizard that works OK with Ghost server app that comes with Ghost 7.5, it uses...

Gaz

08-15-2003 09:05 AM
Gaz

Hello, I am interested in whether there are any products that will plug into a single PCMCIA slot and have a way to expand it to two or more...

Mike McWhinney

08-12-2003 09:46 AM
Mike McWhinney

Hi all, OS:-Win98 SE Driver:- Wdm Hardware- 16-bit memory PC Card on Elan's pcmcia adapter(pci-to-pcmcia bridge) I have done a pcmcia win98(wdm)...

Shiva Prasad

08-11-2003 11:27 PM
Shiva Prasad

Have you installed the driver? -PA "Dolphin Boy" <dolphin_boy_42 (AT) yahoo (DOT) masp.spambackwards.com> wrote

Pavel A.

08-11-2003 04:48 PM
Pavel A.

Does anyone manufacture an extender that would permit staggering two PC cards? I have a Dell laptop computer that has two PC Card slots. However,...

Ginny & Bob Moore

08-08-2003 10:51 AM
Dolphin Boy

The DTPL.EXE tool is not available from microsoft anymore. Does anyone have a copy? Thanks in advance, Carlos

juca

07-23-2003 08:26 PM
juca

As I am sure many people on here are doing, I want to 'simplify' the interface to the CardBus so that it can be easily used by a microcontroller. Two...

Adam Kumpf

07-21-2003 11:18 AM
dhinds@sonic.net

I would like to write a MS-DOS(real-mode) enabler and a W2K device driver for a custom designed flat memory Cardbus. I am still learning about PCI...

juca

07-13-2003 07:52 PM
juca

I recently bought Calluna 260M Card, however, found 9M bytes of sector defects. I tried several format utils, but all the utils cannot access...

izenizen

07-03-2003 06:55 AM
izenizen

Does anyone know of an easy way to integrate a wireless PCMCIA card with a microcontroller (speciffically PIC)? Any tips or ideas? Thanks to...

Michael Banks

06-30-2003 09:04 AM
Michael Banks

Hello everybody! Perhaps some here can help me with my problem. I asked this question on the comp.os.linux.portable newsgroup which has a low...

Christian Heimes

06-23-2003 07:26 PM
Christian Heimes