Printer port PCI card driver

Hi all,

I already installed a 2 x port parallel printer PCI card in a Windows 2000
machine which works fine. Now wish to transfer this card to a new Windows Xp
Pro machine, but, of course, the original installation diskette/CD has been
mislaid.

WXP detects the PCI card and looks for a driver. Have tried scanning the
Internet but to no avail.

The board was manufactured in Taiwan but there are no identifying model
numbers apart from a Ultra2 chipset.

Does anyone have any ideas how a generic driver could be found on the net,
or the card could be installed using the driver on the W2K machine (but
without the .INF installation package).

Regards
Leonard Mor

You can find your board model # (and HWID) using Radarsync software
(you have to look at the s/w log files). It's free and will also look
for the driver for you. I've found that it's especially good for
Taiwan made products.

"Léonard MOR" <lenmor (AT) asi-solutions (DOT) fr> wrote

Hi all,

I already installed a 2 x port parallel printer PCI card in a Windows 2000
machine which works fine. Now wish to transfer this card to a new Windows Xp
Pro machine, but, of course, the original installation diskette/CD has been
mislaid.

WXP detects the PCI card and looks for a driver. Have tried scanning the
Internet but to no avail.

The board was manufactured in Taiwan but there are no identifying model
numbers apart from a Ultra2 chipset.

Does anyone have any ideas how a generic driver could be found on the net,
or the card could be installed using the driver on the W2K machine (but
without the .INF installation package).

Regards
Leonard Mor