| | Rating Thread /
Thread Starter | Last Post  | Replies | Views |
 |  | On Fri, 08 Aug 2003 14:58:35 GMT, Stanley Cline <sc1-news (AT) roamer1 (DOT) org>
wrote:
Actually it is. You have to download the standard...
Steve
|
09-07-2003 09:45 PM
no@nonona.net  | 15 | 32 |
 | | Thanks for this link CSM1
Althought Windows detect the scanner at the startup,
Config32 : "SCSI card not ready or SCSI card not Found"
GetVer :...
Hervet
|
09-07-2003 08:51 PM
Hervet | 2 | 18 |
| | | Hi
One afternoon I got bored with scanning negatives and decided to see what
else I could do with my FS4000 film scanner... ...
Keith Cooper
|
09-07-2003 02:02 PM
Keith Cooper | 0 | 18 |
| | | The advanced workflow allows to set correct CCD exposure and film base
color, however, during profiling, I don't see anything that would take care
of...
Tomas
|
09-07-2003 12:40 PM
Markus Plail | 1 | 24 |
| | | When I try to use any of the four panel buttons, or start the Smart Panel
program, virtually nothing happens. There is a brief sign of activity...
Wayne
|
09-07-2003 12:29 PM
Wayne | 0 | 17 |
| | | I don't know what to look for in a scanner. I would be doing mostly picture
scans. I'm looking for something that'll fit on my desk? Anything else...
lordmajax
|
09-07-2003 10:13 AM
Jon Bell | 1 | 13 |
| | | Hello,
I would like to know if there is any software to "network enable" a HP 5550
or 3530? I know there is a network enabled TWAIN driver shipped...
j2
|
09-07-2003 03:01 AM
j2 | 0 | 15 |
| | | JMooreTS (jmoorets (AT) aol (DOT) com) writes:
Paint shop Pro, although wait until they release 8.1, since 8.01 still has
a few problems. ...
Brendan R. Wehrung
|
09-06-2003 11:41 PM
FOR7b | 5 | 15 |
| | | Hello,
I am looking for an ISIS driver for the HP 8250 scanner.
I am aware that HP do not produce any but I was wondering if there are
any freeware...
Gordon Taylor
|
09-06-2003 11:20 PM
Ric Trexell | 1 | 12 |
| | | I have spent hours and hours with the HP customer service people, and
they have not been able to solve my problem -- or even offer any
insight. Can...
mrm
|
09-06-2003 10:42 PM
mrm | 0 | 20 |
| | | Hi,
i sale vuescan pro version buy 80$, sale 55$
emmanuel
d'araquy
|
09-06-2003 12:38 PM
d'araquy | 0 | 26 |
| | | "Bart van der Wolf" <bvdwolf (AT) nospam (DOT) nl> wrote
I don't believe that Vuescan is scanning the range of the image. When
I scan the same...
Douglas Coon
|
09-06-2003 05:42 AM
Bart van der Wolf | 2 | 27 |
| | | Does anyone have or know where to get an
XP scanner, I believe that there is one.
all the best
Stewart
Stewart
|
09-06-2003 04:48 AM
Stewart | 0 | 9 |
| | | SILVERFAST Ai 6 and 48 BIT IMAGE PROCESSING
Every Standard SilverFast Ai 6 has full 48 bit editing capability for
all functions fo SilverFast such...
Carlos R.
|
09-05-2003 06:48 PM
Karl-Heinz Zahorsky | 3 | 30 |
| | | Microtek 5900 Scanner - user's experience
For what it's worth, I just returned this scanner and will not ever buy another
Microtek product -- not...
HBYardSale
|
09-05-2003 03:36 PM
HBYardSale | 0 | 10 |
| | | "Cliff Rames" <crames (AT) worldnet (DOT) att.net> wrote
I did this. Thanks for the idea, though.
Doug
|
09-05-2003 10:40 AM
Doug | 6 | 22 |
| | | This morning I discovered a new newsgroup:
news:alt.comp.periphs.scanners.vuescan
--
Henk de Jong
http://www.hsdejong.nl/
Nepal and Burma (Myanmar)...
Henk de Jong
|
09-05-2003 09:45 AM
Ralf Hartings | 1 | 18 |
| | | Hello, UrbanVoyeur
you wrote...
This should be, indeed. With my first tries in profiling with vuescan I
noticed that the film base color was not...
Markus Plail
|
09-05-2003 08:12 AM
Erik Krause | 15 | 22 |
| | | I don't find the Help function to be particularly useful when trying
to get this program to run effectively. Is there a manual or tutorial
for this...
fotolover
|
09-05-2003 01:29 AM
fotolover | 3 | 12 |
| | | {43622} Anti S*P*A*M seeding msg - please ignore
Laura Biding
|
09-04-2003 07:11 PM
Laura Biding | 0 | 15 |
| | | "rs1011117" <rseverin (AT) usit (DOT) net> wrote:
The top part of a Kodak Q60 description is attached below.
Regards,
Ed...
Ed Hamrick
|
09-04-2003 05:58 PM
Erik Krause | 1 | 18 |
| | | Hi,
I am new to scanning and would appreciate your inputs. I read that
most photo prints do not have more than 300dpi of information in them.
If that...
Srinivas S
|
09-04-2003 06:51 AM
Bart van der Wolf | 1 | 14 |
| | | Ed Hamrick wrote:
Awww.... Ed, I can't keep up with you! LOL!!!!
I was just going to compliment you on 7.6.58 for the Minolta DSE5400. ...
William D. Tallman
|
09-04-2003 05:07 AM
AArDvarK | 2 | 18 |
| | | Maybe reflection can damage CCD? :)
You're right about the manual though. It doesn't explain WHY not. :(
m.
"Dierk Haasis" <Dierk.Haasis (AT)...
Dan Marder
|
09-04-2003 01:54 AM
Dierk Haasis | 5 | 20 |
| | | I'm having the same issue with my 8000F, as soon as I disconnected the other
USB devices it seems to be ok. I'm currently installing them 1 by 1 to...
Al
|
09-03-2003 08:53 PM
Al | 0 | 12 |
| | | Stupid question that I should know the answer but here goes:
- I have a Canoscan 4000 scanner used with Vuescan. I use PS for post
processing. For...
joe
|
09-03-2003 08:26 PM
Andrey Tarasevich | 3 | 19 |
| | | If I have a stack of photos and more than one of then can fit on the glass
of a flat-bed scanner, what is best software to use to scan the photos...
New Question
|
09-03-2003 06:21 PM
David R | 5 | 12 |
| | | I have recently been tasked with scanning all of my grandparents' old
35mm color slides (hundreds of them). The output will be primarily
on-screen...
Susan H. Cook
|
09-03-2003 04:40 PM
William D. Tallman | 1 | 14 |
| | | Is there any OCR software that will work with my Epson 3200 under OS X?
I tried Omnipage and it simply will not recognize my scanner. (And
Scansoft...
^
|
09-03-2003 03:12 PM
^ | 0 | 16 |
| | | There's a somewhat critical review of this new scanner in this week's UK
"Amateur Photographer". Whilst the reviewer is happy with the quality of...
Malcolm Stewart
|
09-03-2003 10:35 AM
Bart van der Wolf | 2 | 9 |
| | | Bart van der Wolf schrieb:
Bart,
I think you misunderstood me.
I wanted to say, if we only have a single color, without context, then it...
Thomas Otterbein
|
09-03-2003 06:42 AM
Bart van der Wolf | 34 | 35 |
| | | hi
I would like to know which scanner will meet my needs and what would
be the cost of this in the US.
- Need to scan about 3million A4 sheets.
-...
B. G. Mahesh
|
09-03-2003 03:39 AM
B. G. Mahesh | 0 | 20 |
| | | Now that Heidelberg has dropped its desktop scanners, is there any way
of getting software updates?
I particularly want to update my LinoColor Elite...
Null
|
09-03-2003 03:15 AM
Null | 0 | 13 |
| | | Pete,
I'm using the scanner on a USB hub and my PC ports have USB 1.1 capability
only, so I'd guess that is not your problem. I have 2 USB hubs and...
Peter Kennedy
|
09-02-2003 11:00 PM
Mike Henry | 2 | 8 |
| | | W. W. Schwolgin wrote:
Not a computer newbie. Compiling and installing stuff is trivial for a
system that has all the necessaries.
A digital...
William D. Tallman
|
09-02-2003 07:31 PM
William D. Tallman | 7 | 17 |
| | | Hi All,
VueScan newbie question:
Trying to scan 35mm slides using VueScan 7.6.58 w/ Nikon Super
Coolscan 4000 ED for use on the web. I would like...
JoeD
|
09-02-2003 10:14 AM
JoeD | 0 | 12 |
| | | Are any of the current crop of low-end scanners with automatic
document feeders(like, say, the Microtek 5950) able to reliably scan
stacks of glossy...
Jeff
|
09-02-2003 08:10 AM
Jeff | 2 | 9 |
| | | From the VueScan 'changes' page:
"Improved scan quality on newer Minolta scanners (Avision models)"
Does anybody know which Minolta filmscanner was...
Wilfred van der Vegte
|
09-02-2003 08:06 AM
wally | 4 | 21 |
| | | Alan:
I have lots of Firewire stuff and have never seen this.
Is the scanner connected directly to the PC, daisy-chained thru
another Firewire...
Ira Solomon
|
09-01-2003 07:59 PM
Ira Solomon | 0 | 15 |
| | | Life is a series of small victories. Today I've figured out a solution
to one of my on-going color-correction problems.
I mostly scan negatives on a...
Preston Earle
|
09-01-2003 12:51 PM
Preston Earle | 0 | 16 |
| | | Hello,
I have a 969 MB item in the multipro preferences called FullMaxImage.
Library/Preferences/Dimage Scan/DS MultiPRO/Prefs/DRAG/FullIMaxImage
I...
Aitor
|
09-01-2003 12:12 PM
Aitor | 0 | 16 |
| | | Hi folks - using any version of mirascan, I can't get this scanner to
automatically crop images. It always scans the full vertical length of...
Shrink
|
09-01-2003 11:17 AM
Shrink | 0 | 12 |
| | | I am in the market for a film scanner and would appreciate comments
comparing the new Minolta Scan Elite 5400 and the Nikon Super Coolscan
4000 ED...
Jim
|
09-01-2003 10:19 AM
Bart van der Wolf | 4 | 18 |
| | | Hi
I've just taken some portraits using Kodak Portra 160NC
The 6x4 Proofs i recieved looked gorgeous but i just can't get a decent scan
I'm using a...
Stewart
|
09-01-2003 08:53 AM
Leonard Evens | 1 | 14 |
| | | "Gerhard Fuernkranz" <nospam456 (AT) gmx (DOT) de> wrote
SNIP
Absolutely, but with the file sizes one can "achieve" in VueScan, that would
be...
Alan
|
09-01-2003 08:41 AM
Alan | 12 | 22 |
| | | Ok
"Bart van der Wolf" <bvdwolf (AT) nospam (DOT) nl> wrote
John carlton
|
09-01-2003 08:13 AM
John carlton | 0 | 31 |
| | | Yeah but 1200 dpi is just sooo cool :)
Makes fileds like 10 megs in size to thats just a bonus :)
On Fri, 29 Aug 2003 13:32:05 GMT, "csm1" <nomail...
We Live For The One We Die For The One
|
09-01-2003 07:17 AM
We Live For The One We Die For The One | 0 | 15 |
| | | On 30 Aug 2003 08:52:30 -0700, CJ wrote:
Paperport Pro Office 9 will handle 1, 2, 3 and 4.
Omniform ought to handle 5.
Both are available from...
Rita
|
09-01-2003 06:15 AM
Rita | 0 | 10 |
| | | On Sun, 31 Aug 2003 17:02:53 +0200, Bart van der Wolf wrote:
Thanks Bart, I followed your procedure and the scratch and dust option
appears in the...
jmp
|
08-31-2003 04:47 PM
jmp | 3 | 16 |
| | | My manual informs me that I should place the film strip face down in the
film guide for scanning.
Can someone tell me if the shiny or dull side of...
Stephen Smith
|
08-31-2003 02:45 PM
Bart van der Wolf | 5 | 14 |
