| | Rating Thread /
Thread Starter | Last Post  | Replies | Views |
 |  | What is the maximum size hard drive that can be handled by the 2940UW?
Howard Kaikow
|
05-22-2007 11:59 AM
Eric Gisin  | 2 | 472 |
| | | Michael Giegerich wrote:
I don't know if this is the reason, but mechanical systems tend to
resonate. If, for example, you put a bunch of similar...
Folkert Rienstra
|
05-18-2007 09:54 PM
Eric Moore | 23 | 163 |
 | | I have a Compaq (rebranded Sony) DDS-4/DAT40 autoloader in which until
now I have used only Sony tapes. These have never needed to be
retensioned or...
Percival P. Cassidy
|
05-11-2007 01:02 AM
Rob Turk | 3 | 78 |
| | | Hello!
I've just bought an Linotype Saphire Ultra Scanner, which supports
SCSI-II.
On my notebook I'm running Win XP.
What I now need is a...
Sebastian Scholz
|
05-08-2007 06:24 PM
Eric Gisin | 5 | 80 |
| | | I was trying to add an additional SCSI drive to a Dell 1300 server.
The motherboard has a SCSI controller on it plus it has an additional
Raid card,...
carcari@gmail.com
|
05-05-2007 03:39 PM
John L Rice | 1 | 99 |
| | | Rita Ä Berkowitz wrote:
LOL
Idiot.
fred
|
05-04-2007 08:47 AM
chrisv | 19 | 129 |
| | | I started a background format on a DVD+RW. Then I stopped it with
the CLOSE TRACK/SESSION function 0 (Quick Stop BG Format).
Now when I reinsert...
Darin Johnson
|
05-03-2007 05:07 PM
Darin Johnson | 0 | 81 |
| | | The RAID controller on my Compaq ProLiant ML370 server doesn't work.
There is no message from the controller at boot time (like no RAID
controller...
Acik
|
04-26-2007 06:05 PM
Michael Hawes | 1 | 83 |
| | | Hello,
I am a newbie to RAID recovery. I did a lot of research before my
first attempt, but it failed so I am hoping for some further advice.
I...
mrceolla@gmail.com
|
04-23-2007 07:40 PM
Ray | 6 | 92 |
| | | Is anyone out there using the adaptec usb2xchange and iomega JAZ drive?
fpefpe
|
04-22-2007 10:11 AM
fpefpe | 0 | 80 |
| | | Hi,
I'm trying to restore a Gateway 2000 that is part of a GC/MS
instrument, to functionality. The hard drive is a SCSI v2 2.1 GB
Seagate ST32430N...
d.086@hotmail.com
|
04-21-2007 04:32 AM
Andrew Gabriel | 19 | 163 |
| | | I'm making myself a multiple disk enclosure for SATA drives.
Having bought the first two drives, I find there's no LED
activity connector on the...
Andrew Gabriel
|
04-17-2007 02:56 AM
Andrew Gabriel | 0 | 83 |
| | | I am new to SCSI pls give me some details about Scsi.
And please metion about the details that i should know.
thanks
Raghav
|
04-13-2007 09:22 AM
PeterD | 4 | 89 |
| | | Excuse the lack of specific details. I'm not at the computer in question.
I have a computer at work with 3 hard drives. The C: drive is IDE. D: and...
DanR
|
04-06-2007 07:49 PM
DanR | 10 | 138 |
| | | I have a Precision 670 with a U320 SCSI hd controlled by the on-board
AIC-7901. I was wondering if anyone knew whether it is possible to
create a...
googlegroups@struzak.com
|
04-04-2007 03:17 PM
googlegroups@struzak.com | 0 | 85 |
| | | Anyone car to clarify? :
msg
|
04-02-2007 01:28 PM
msg | 0 | 71 |
| | | NuT CrAcKeR wrote:
ping
|
04-01-2007 08:23 PM
msg | 21 | 155 |
| | | On Mon, 26 Mar 2007 16:56:47 +0200, "Folkert Rienstra"
<see_reply-to (AT) myweb (DOT) nl> wrote:
....for a possible sata-scsi conflict or for the...
sl@hotmail.com
|
03-29-2007 06:06 PM
Folkert Rienstra | 5 | 91 |
| | | I was trying to add an additional SCSI drive to a Dell 1300 server.
The motherboard has a SCSI controller on it plus it has an additional
Raid card,...
carcari@gmail.com
|
03-28-2007 11:48 AM
carcari@gmail.com | 0 | 82 |
| | | I was trying to add an additional SCSI drive to a Dell 1300 server.
The motherboard has a SCSI controller on it plus it has an additional
Raid card,...
carcari@gmail.com
|
03-28-2007 11:29 AM
carcari@gmail.com | 0 | 86 |
| | | I am making a new motherboard purchase,
hopefully with a AMD ATHLON 64 X2 4800+ EE
processor and I would like to run a 64-bit
version of Linux.
I...
Ivan K.
|
03-26-2007 11:21 AM
Ivan K. | 5 | 81 |
| | | I am new to SCSI, just bought an external SCSI device(DLT Tape
drive.), I have a windowsXP based PC. With the provided driver CD, i
have installed...
ab.clemson@gmail.com
|
03-24-2007 01:02 PM
bansalvikrant@gmail.com | 7 | 86 |
| | | I recently acquired several Jujitsu 73GB SCSI drives but they do not have
selectable addresses in the drive. Dose this mean they must be use...
PeterH
|
03-24-2007 03:20 AM
Folkert Rienstra | 2 | 87 |
| | | Hi all,
I'm looking for a bit of advice about a HP SureStore E AutoLoader 818
which is connected to a AHA-2944UW (BIOS v2.20) HVD SCSI card...
dippa
|
03-22-2007 03:37 AM
Rob Turk | 1 | 83 |
| | | I must buy a computer for a customer with connection to a Tandberg LTO
(internal). I know that I can buy an Adaptec 29160, but are there...
Burkhard Schultheis
|
03-15-2007 06:49 AM
wolfgang schneider | 2 | 93 |
| | | I am trying to follow a suggestion that I install the latest driver
for my SCSI controller (29160n, in Windows XP) to see if it will
correct a...
Jonathan Sachs
|
03-14-2007 07:16 PM
Folkert Rienstra | 3 | 77 |
| | | Hello
I've a Compaq 2940U2 (OEM)
(PCI ID : VEN_9005&DEV_0010&SUBSYS_21809005&REV_00)
I made a mistake : I flashed a bios for Adaptec 2940U2W. This...
Gilles Vollant
|
03-14-2007 07:52 AM
Folkert Rienstra | 2 | 79 |
| | | Hello,
I am configuring a dual boot system (Vista and Win XP). Rather than
purchasing new 10K SATA drives (to use as system drives), I have...
no spam
|
03-13-2007 09:30 AM
Folkert Rienstra | 4 | 97 |
| | | All the time I see "burst data rate" used as a measure for performance
of a tape drive, but I have never seen a clear definition in layman's
terms...
nicksmaint@gmail.com
|
03-13-2007 01:35 AM
Rob Turk | 2 | 90 |
| | | Hello mailing list,
with my Mylex ExtremeRAID I have a great problem.
During the initialisation process only the mini menu is accessable...
Juergen Dankoweit
|
03-10-2007 03:03 PM
Juergen Dankoweit | 0 | 87 |
| | | I've got a SCSI performance question....
I just set up a multi-seat box for my kids. It runs on an Athlon 2000
XP, with 786 MB RAM.
The mobo is a...
CptDondo
|
03-09-2007 10:59 AM
Andy | 7 | 92 |
| | | hello
does anyone have any code snippet that how MS iSCSI initiator detect a
jukebox?I am working on Jukebox over MS iSCSI,but couldn't...
fred
|
03-09-2007 10:55 AM
Andy | 1 | 81 |
| | | Hello folks,
I'm concerned about the heat of a SCSI drive that is in almost constant
operation. This drive is being used in an Akai digital sampler...
Dr.White
|
03-08-2007 06:15 PM
Dr.White | 2 | 80 |
| | | I've upgraded from XP to Vista Ultimate x64 and my old U320 controller
isn't supported anymore. I'd like to continue using my VXA-1 tape
drive, but...
Glowball
|
03-08-2007 01:13 PM
Torbjorn Lindgren | 2 | 85 |
| | | I'be got a DawiControl SCSI adapter (with bios) installed and upon
booting it finds the attached HDD's and assigns SCSI ID's (0 upto 7
where 7 is the...
peacekeeper
|
03-07-2007 05:52 PM
Folkert Rienstra | 14 | 125 |
| | | Can someone tell my if it is possible to have Vista Ultimate edition to
recordnize my 2940 adaptec controller, so that I can use the patches...
Zeg maar jij
|
03-06-2007 03:33 PM
Torbjorn Lindgren | 3 | 76 |
| | | Hi,
I have a Certance LTO3 tape streamer which I upgraded with the last
firmware image from quantum web-site (the new owner of certance). Sadly,
I...
Steven Munlo
|
03-06-2007 01:19 PM
Steven Munlo | 3 | 81 |
| | | Hi,
I have a Certance LTO3 tape streamer which I upgraded with the last
firmware image from quantum web-site (the new owner of certance). Sadly,
I...
Steven Munlo
|
03-05-2007 09:00 AM
Steven Munlo | 0 | 77 |
| | | I am wanting to add a second scsi hard drive to my HP Proliant 310ML server
for file storage, the operating system will remain on the existing drive....
angharad
|
03-04-2007 04:49 PM
philo | 1 | 79 |
| | | I have an old Gateway 7250R server with hot-swappable (non-RAID) U160
SCSI disk interface. I want to move my 2 newer larger disks to my
newer...
SherryB
|
03-04-2007 06:04 AM
Michael Baeuerle | 9 | 83 |
| | | I've damaged the rubber-like stuff on the crimping plate of a 3M
3443-106N
crimping tool, by clamping too hard.
Any advice on what to use to replace...
gearloose
|
02-28-2007 08:07 AM
gearloose | 0 | 74 |
| | | Hi
Hopefully an easy question for you experts to answer!
I have a Windows Server 2003 with an external SCSI RAID 5 disk array
which is set up with...
gavin@msfitout.com
|
02-27-2007 08:33 AM
gavin@msfitout.com | 0 | 78 |
| | | hi, I hope can shed some light on my problem. there is lot to digest.
I am a newbie on the scsi sides of hardware, but know what they
capable of and...
dstuarts@googlemail.com
|
02-25-2007 08:48 PM
ranjit_mathews@yahoo.com | 25 | 162 |
| | | I have a RAID 5 array on our Netserver with 3 36 Gig drives. NetRaid
Assistant shows all 3 as Failed with the following error is the...
szakarian@gmail.com
|
02-23-2007 02:50 PM
Rob Turk | 1 | 76 |
| | | I have a RAID 5 array on our Netserver with 3 36 Gig drives. NetRaid
Assistant shows all 3 as Failed with the following error is the...
szakarian@gmail.com
|
02-23-2007 01:27 PM
szakarian@gmail.com | 0 | 81 |
| | | Hello all...
I am no SCSI expert by any means, but I've learned a lot by running
SCSI devices on IBM PS/2 and Microchannel hardware.
However, all...
wm_walsh@hotmail.com
|
02-22-2007 12:02 PM
wm_walsh@hotmail.com | 4 | 70 |
| | | A long time ago (2 Jun 2000 17:56:54 GMT) "Rob Turk"
<rob.t... (AT) gelrevision (DOT) nl> wrote:
No, that doesn't make sense. Pardon the pun.
The...
BubbaGump
|
02-19-2007 09:17 AM
BubbaGump | 8 | 98 |
| | | May be this topic has been discussed before, I am not a computer geek
and very new to SCSI devices, recently bought a DLT tape drive that
has SCSI SE...
ab_clemson@yahoo.com
|
02-18-2007 10:37 PM
soma.barman@gmail.com | 4 | 79 |
| | | hello everybody!
i use parallel SCSI technology myself for over a decade mainly because
of the fact that the I/O operations of SCSI do not affect...
alexander.huemer@gmail.com
|
02-17-2007 06:11 PM
Folkert Rienstra | 7 | 77 |
| | | Something basic about SCSI has confused me for a while. Is REQUEST
SENSE required to clear a unit attention condition or is TEST UNIT
READY...
BubbaGump
|
02-17-2007 08:53 AM
BubbaGump | 2 | 71 |
