?? Is there a SCSI Card that will work in a old AMS Soundwave 486 Laptop W/W95. I have an IBM SCSI CDROM Drive but can't find a SCSI card that the...

Robert J. Stevens

02-16-2007 10:45 AM
Robert Heller

Hi, I'm using the the sg linux device driver to mount a tape on a tape library. I get from time to time while mounting a tape a device or resource...

hcacote@gmail.com

02-13-2007 12:22 PM
Folkert Rienstra

Hi ... I have a rather peculiar problem... I have two sets of data from different sources...Both the sets of data consists of lot of TIFF images...

prabhu.pravin@gmail.com

02-09-2007 05:19 PM
Michael Baeuerle

Does anyone know of a SCSI to USB or firewire converter that works with linux? The ones I've seen seem to be mostly usb 1.1, which makes them...

CptDondo

02-09-2007 03:07 PM
Chris Cox

Hi All, I'm looking for a way to permanently disable reflashing of the bios. I have several platforms, not a specific vendor or series. I thought...

Bradly_Jeff@yahoo.com

02-06-2007 07:17 PM
Paul

Hello, I have IBM valuesmart vs160 tape drive, and installed it. Can you provide me some of scsi command tool and can execute CDB? I want to check...

yixuan

02-06-2007 12:59 PM
Folkert Rienstra

Hi all, I posted this question on January 16th: Recently I installed a new motherboard (ASUA P5B) with processor and memory. I Kept my old SCSI...

Fokke Nauta

01-29-2007 04:58 AM
Fokke Nauta

hi small info: this SCSI controller: ULTRA 160/m PCI Adaptec AIC-7892 (68 pin) is compatible with this HD: MAW3073NP (fujitsu) 68 pin U320...

goldfix

01-25-2007 05:42 AM
goldfix

I have two 68-pin SCSI drives that I pulled from a server that went belly up years ago. Does anyone make an adapter cable for these SCSI drives...

gunnar.stoa@gmail.com

01-22-2007 06:40 AM
Folkert Rienstra

I put together an all scsi pc about 5 years ago, with a 9GB u2w hd attached to an Adaptec 2940U2W controller. Later added an 18GB hd to the chain...

scuzzy

01-20-2007 04:26 PM
Michael Hawes

I must have over a hundred misc jumpers removed from old equipment. of that entire lot, only ONE of 'em was tiny enough to use to jump...

dave

01-18-2007 02:45 AM
murph1012

Hi all, Recently I installed a new motherboard (ASUA P5B) with processor and memory. I Kept my old SCSI card (Adaptec 7850). The system runs fine,...

Fokke Nauta

01-17-2007 02:56 PM
Jeremy Boden

How does one connect an external Ultra SCSI drive? The only cables I find connect the case external receptical to the SCSI card. I wish to connect...

William C. Smith

01-14-2007 10:00 AM
William C. Smith

Which is latest bios for 3200S? Official bios is 1.62 and firmware is 370F.. Is there any *unofficial* firmware and bios, like 3.10 for adaptec...

shark

01-13-2007 08:11 AM
shark

Hi, I have an Exabyte M2 hooked up with a 50pin converter to the 50 pin cable to the PC card and it won't work with Adaptec Slim scsi 16 bit pcmcia...

Tom C.

01-13-2007 01:48 AM
Folkert Rienstra

I had a SCSI hard drive but then I decided to put a IDE one instead. After I installed windows XP on it the PC rebooted and said that there was NO...

littler9870

01-11-2007 10:10 PM
daytripper

Hello there! I need some help/advise! I've a Raid 5 with 4 hitachi scsi hd. 1 of the disks went down (it's dead), and now i'm not being able to find...

astra14i@hotmail.com

01-09-2007 04:50 AM
astra14i@hotmail.com

Hi all I have a customer who desperately needs one or two Overland L490E's. Is anyone is this group able to give some hints on where to find them ?...

Nico de Jong

01-08-2007 04:00 PM
Nico de Jong

Hi, I want to buy a used LSI Logic 20160 SCSI-Controller (32 Bit PCI, U160). On the LSI website I found no drivers for Windows Server 2003 or...

Steven Munlo

12-29-2006 11:35 AM
Steven Munlo

Hi! I have a question about different PCI-slots. I have a SCSI 39160 64-bits PCI-card with some SCSI components. At the moment I have it a standard...

Fredrik Odéhn

12-27-2006 12:55 PM
daytripper

Dear all, My server have problem with HDD(hotspare). I had configured in hard RAID1 with LSI RAID controller. The HDD failure is in slot1. Now i...

thethongtran@gmail.com

12-25-2006 02:12 AM
John L Rice

Does anyone know of a brand and model nr of SCSI HD that can be formatted with 2048 bytes/sect using Bart's tools or similar. I have tried nearly all...

djspearritt@gmail.com

12-25-2006 01:19 AM
djspearritt@gmail.com

I'm new to raid and to sas drives, but have been working with parallel scsi for a few years. I just put up a new server with 4 Seagate ST373454SS...

Jeff

12-23-2006 10:14 AM
Jeff

Hi Guys, Please help. I am new to SCSI's. I have recently got myself an old server its an Acer Altos 1100e. I have 5 hot swap SCSI drives in there,...

pritesh123@gmail.com

12-22-2006 07:22 AM
Folkert Rienstra

hi guys my four "new" 181gb seagate ST1181677LW SCSI drives are now in the enclosure I made for them (actually, a cut-down server case)....

dave

12-21-2006 09:31 AM
Don Matthews

P.S. This is a 68pin U160 cable and drives.

mrceolla@gmail.com

12-20-2006 10:29 PM
mrceolla@gmail.com

I have a windows 2003 server computer that has two SCSI drives. C and D. The C drive is full. I want to increase the size of the 36 Gig drive as it...

steve

12-19-2006 10:55 AM
Folkert Rienstra

Wer kann mir helfen ? - Suche Manual für Accusys ACS-8610U3 (SCSI TO IDE RAID controller). Technische Info welche mir derzeit zur Verfügung...

Alfred Steiner

12-14-2006 07:51 AM
Folkert Rienstra

I have an adaptec EZ-SCSI pcmcia card and I have a drive with a 68 bit connector. Can they be hooked up together? Passively? TIA

unix_fan

12-12-2006 02:12 AM
unix_fan

who can tell me the function of the scsi disk's mode page.

letit

12-10-2006 10:40 PM
letit

Hello, I administrate a server where we've been given an external tape drive with 68-pin connectors clearly marked "LVD/SE". I did also get...

sigve.indregard@gmail.com

12-10-2006 09:56 AM
Folkert Rienstra

How can i change the default parameter of my Tandberg SCSI tape drive, like compression, ? The drive manual speaks about mode select, and give...

Daniel Eyer

12-09-2006 08:47 AM
Michael Baeuerle

How can i change the default parameter of my Tandberg SCSI tape drive, like compression, ? The drive manual speaks about mode select, and give...

news.wanadoo.fr

12-06-2006 05:12 AM
news.wanadoo.fr

I just bought the card. What doesn't make sense is, my 19160(that I am using now) is a 68-pin card and, so is the one I bought. With the 19160, I...

Christopher Range

12-05-2006 05:45 PM
Folkert Rienstra

My SCSI equipment has started acting up. I have an adaptec 2940UW controller, with three devices. A plextor cdrom drive on the 50 pin cable (that...

Not@home

12-05-2006 12:58 PM
Not@home

hi guys building (actually modifying an old server case) to hold four 7200 RPM 181gb seagate SCSI drives. one of two items I'm short is the "case...

dave

12-04-2006 02:51 PM
hdrdtd

Hey ! I'am looking for an analzer and monitoring tool ! At the adaptec pages, i didn't find anythink! I have a adaptec raid I scsi and a adaptec...

horst

12-04-2006 01:36 PM
Folkert Rienstra

Hallo, What will happen, if during rebuilding the the 2/second disk of a 2-Disk-RAID1-Array, (attached on a Adaptec OnBoard HostRAID adapter...

john

12-03-2006 04:54 PM
Christopher Range

The above text was posted by a another individual on a computer discussion forum, that I am a member of. I would appreciate any suggestions that, I...

Christopher Range

12-03-2006 02:08 AM
Christopher Range

Please help me with this... LSI MegaRAID 320-1 is reporting this for both of hard drives in RAID1 NOTIFY:Check Condition on Ch 1 ID 0 with the...

V

11-29-2006 05:20 PM
Folkert Rienstra

Lee Jones wrote: Folkert Rienstra wrote: It's working fine for my purposes now, Folkert. I installed a drive overlay on the IDE drive so it has...

Lee Jones

11-29-2006 10:00 AM
Lee Jones

I would like to ake some things if anybody know. I would like to attach on my ibm netfinity 5000 with AIC-78xx integrated scsi controler to ibm's...

Marin

11-29-2006 07:05 AM
Michael Baeuerle

I'm about to put a medium duty server together and am new to SAS (serial attached SCSI) and the difference between on-board controllers and...

Jeff

11-23-2006 05:24 PM
Folkert Rienstra

I opened up the case on my Dell Precision 330 Workstation equipped with an Adaptec 29160N SCSI card and 2 internal Fujitsu Ultra 160 LVD (68 pin)...

Gene

11-21-2006 09:09 AM
Gene

Now I have 2 SATAII Drives NVRAID RAID0. I want something faster. And I have few solutions: 1. Add third drive to existing RAID0 2. Buy Adaptec...

reloader

11-20-2006 11:21 PM
David Flory

SCSI Products Thanksgiving Deals at SCSI4ME. Save 50% or more on selected items Offer valid from 11/17 -...

DZJZ79@gmail.com

11-20-2006 12:00 PM
DZJZ79@gmail.com

I am trying to upgrade an IBM LTO2 tape drive from a firmware revision in the 3000 series to 53Y3 using the IBM LTO-TDX tool under Windows. First,...

Will

11-17-2006 11:58 PM
Will

I moved this post up from the bottom of the "Loss of SCSI" thread to get it a little more exposure. This is probably just a 1980's era BIOS...

Lee Jones

11-16-2006 09:14 AM
Lee Jones

Hi all - anyone seen this behavior before? System was running fine - then one day...BSOD. Tried transplant into another working SCSI capable system...

kfellger

11-15-2006 06:55 PM
kfellger

Hi! I wonder if it is possible to remove the drive from it´s Hot Plug Bay and use it as a ordinary 80-pin drive? It´s a HP 347708-B22. More info on...

Mr.Perfa

11-14-2006 06:07 PM
Folkert Rienstra