This error pops up in the Administrative Tools / Event Log several times a day. If I didn't examine the long, I'd have no idea there was a problem,...

Agent_C

06-29-2006 10:30 AM
daytripper

i have compaq dlt device (160/320 gb) on 2940UW (68 pin). it worked perfectly (scsi at chanal 7 and device at 8) until i put 19160/29160 scsi. 19160...

Eniac

06-29-2006 04:52 AM
Eniac

Windows XP : Odd one this, I've set the "MaximumSGList" of my "aic78u2" driver to 128, yet I still can't get transfers of anything over 64kb...

Matthew Augier \(dps\)

06-28-2006 03:38 AM
Matthew Augier \(dps\)

Hi I am curious about knowing how scsi disk drivers behave with a faulty disk. I am having a faulty disk and "read()" system call on that disk will...

siddharthtuli (AT) gmail (DOT) com

06-28-2006 01:08 AM
David A.Lethe

Well I got the Hard Drive (73 GB, 15k) and it was a sca, so I also got a convertor. Connected all the parts started the computer and... well the card...

AT

06-26-2006 09:36 PM
AT

I have an Intel D850MV Mother Board and a Seagate ST173404LW Cheetah (SCSI Ultra 160), the drive works great but I would like to get a large drive...

AT

06-26-2006 05:36 PM
Michael Hawes

Ok, probably missing somethign really obvious, but I know I have a card SCSI0, and I know the manager of this card and everything else... but how...

Matthew Augier \(dps\)

06-23-2006 07:08 AM
Matthew Augier \(dps\)

I am not at all a SCSI specialist but recently ran into troubles when trying to install a benq Scanwit dia scanner on my WinXP computer. This scanner...

Günter Findenegg

06-21-2006 11:10 AM
Folkert Rienstra

Hi, I was wondering how the host software will behave in case of WRITE MULTIPLE command of ATA. Will it check for DRQ (or any other bit) before...

AT

06-21-2006 06:13 AM
AT

ATTO Products: 1. FibreBridge 1100D FCBR-SU64-DSK ATTO FIBRE CHANNEL BRIDGE DESKTOP, SINGLE-ENDED, EnHANCED Qty:...

VZA

06-21-2006 05:49 AM
VZA

John Doe <jdoe (AT) usenetlove (DOT) invalid> wrote in news:Xns97E6B5430A57A0123456789 (AT) 207 (DOT) 115.17.102:

Beemer Biker

06-18-2006 06:47 PM
Frazer Jolly Goodfellow

Hello everybody, Did anybody know how to convert my scsi cd-writer with50 pins to 40 pin thank you yopu can contact me on dipsondolphin (AT) yahoo...

AT

06-18-2006 06:06 PM
George Hester

Hello, excuse me for my bad english but I don't hunderstand what's happen with a adaptec 29160N pci card : After passed 3 hours between my computer...

DUPRE Jonathan

06-14-2006 11:42 AM
Folkert Rienstra

I setup my computer to be all scsi about 4 years ago (Seagate 9GB HD, IBM 18GB HD, internal CD Writer, external CD reader, Umax 2200 scanner) using...

scuzzy

06-14-2006 09:01 AM
Robert Heller

Hi, A IBM scsi disk is connected to my motherboard by a adaptec 2940UW card. It is formatted and partitioned, contains data, is recognized by...

Doggybad

06-11-2006 04:42 PM
Doggybad

I remember from a while back that some of these cards can be flashed with regular Adaptec bios and some cannot. iirc you could tell which could and...

Les Matthew

06-09-2006 07:22 AM
Les Matthew

Is the multiple-drive read test in SCSITOOL a reliable indicator of overall bus bandwidth demand and limits? When I performed that test with all...

Bruce Morgen

06-08-2006 02:36 PM
Bruce Morgen

Lo, I have an old adaptec 2940U (aic-7861). I have bought a aiti130 ultra wide tape drive. The 68 pin to 50 pin converter is a belkin...

JD

06-08-2006 08:49 AM
JD

I have / had a RAID-10 "HostRAID" array built from 4 x Maxtor Atlas IV 10k 36GB U320 drives, using the onboard AIC-7901W controller on my...

Andrew Wasielewski

06-07-2006 01:41 AM
Folkert Rienstra

I think it's dangerous that anyone can sit in front of a server without any permission and he can access the RAID bios during the boot process, then...

orsobubu

06-06-2006 07:14 PM
AT

In other words the Connectors on each of the SCSIs have jumpers for LEDs. The Motheroard has a connector so that when the SCSIs are being accessed...

George Hester

06-03-2006 09:02 PM
Charles C.

Hi, I'm trying to detect the end of data on a tape device by skipping a big number of filemarks but although the st tape device driver (debug on)...

AT

06-01-2006 04:08 PM
AT

twirling when it is not being accessed. So that the diode indicator never goes off. My other two SCSI harddrives further up the ribbon closer to...

George Hester

06-01-2006 03:20 PM
George Hester

HI all, Is that possible to get a chip that converts single ended digital signal to LVDS differential signal? please let me know where can i get...

praveen.sethuram (AT) gmail (DOT) com

06-01-2006 12:35 PM
Folkert Rienstra

"Politically Incorrect" <PI (AT) hotmail (DOT) com> wrote: "normal;" FDisk would not see it?

Dave

05-31-2006 01:25 AM
Folkert Rienstra

Anyone have a few unwanted 50-pin SCSI1 drives, about 2GB each? Oh and in the UK. Specifically looking for something like the Seagate 'N' models,...

techie_alison

05-30-2006 09:19 AM
Dorothy Bradbury

This problem has had me running in circles for the past couple of weeks…. The basics. I’ve got 4 identical SCSI 3 disks. Fujitsu MAN3367MP (badge as...

springer

05-29-2006 03:02 PM
Folkert Rienstra

Hi. I've configured raid 5 ( 3 disks SCSI 10K 17GB ) on Adaptec 2010S. Write performance is lower than single disk. When I restore DB2...

Paul Nartowski

05-26-2006 02:00 PM
Dorothy Bradbury

Is RAID 0 suitable for the main boot partition? Or is it better to use a single disk for the OS and the RAID array for programs and such? I...

Larry Hodges

05-26-2006 01:52 PM
Dorothy Bradbury

Hi NG I'm having trouble connecting a HP StorageWorks DAT 72 internal tape backup to an Adaptec AHA-2940AU controller. I'm trying to connect the...

Steffen Beck

05-26-2006 11:19 AM
Folkert Rienstra

On Sun, 21 May 2006 04:09:38 GMT, "Politically Incorrect" <PI (AT) hotmail (DOT) com> wrote: The Adaptec 2940U is a PCI card. The choice of...

Bruce Patis

05-25-2006 03:45 PM
Bruce Patis

Hi guys, you are my last hope on this matter. I bought a Mylex RAID controller (DAC960PG) off ebay. I downloaded the latest release of the flash...

Lars @ Home

05-25-2006 01:07 PM
Robert Heller

Hello, I have an unusual question: We have an application that needs to access a bunch of multi-gigabyte odd-sized two-dimensional arrays and slices...

Ancient_Hacker

05-25-2006 10:24 AM
David A.Lethe

Ever heard of this? When I am sending a file to the machine that has the SCSI drives one of the drives starts up diode comes on sputters turns...

George Hester

05-25-2006 12:36 AM
George Hester

Hi again, I'm running XP x64 and an Adaptec 29160N U160 controller. This configuration runs fine. But I just picked up a new U320 controller,...

Larry Hodges

05-22-2006 08:57 PM
Larry Hodges

Hi all, I am having problems connecting a Quantum DLT 7000 LVD external drive to an Adaptec 2940UW: With the following chain: Adaptec 2940 |-----|...

haydude

05-22-2006 06:19 AM
haydude

I have a IBM Pseries disk.The following is output: ROS Level and ID............43373043 Serial Number...............00 EC...

letit

05-18-2006 08:30 PM
letit

Hi All I have an IBM x-Series 346 server onto which I have installed Windows 2000 Advanced. I now want to install a ServeRaid 7k card into...

AT

05-18-2006 09:26 AM
AT

Hi all An Overland L490E at a customer site has developped a weird problem. When unloading a cassette, the pin meant to reseat the header block...

Nico de Jong

05-18-2006 06:21 AM
Nico de Jong

Looking for original DOS SCSI driver/utilities for: Panasonic LS3700 aka Matshita LF-3700 aka Plasmon RF7030 "phase change" 1.5G optical drive....

Rick

05-15-2006 06:59 PM
Rick

How can I turn on and/or off a SCSI drive on demand in working XP?

aibc

05-13-2006 06:24 PM
Eric Gisin

Marten Kemp <martendotkemp (AT) thisplanet-link (DOT) net>, In a message on Tue, 17 Jan 2006 18:27:20 GMT, wrote : MK> I've been working with...

Robert Heller

05-12-2006 06:15 AM
Christopher Range

Hi, The motherboard of my old Compaq Prosignia 200 server died. I transferred the scsi controller and disks to another PC compatible that does not...

Bernard

05-11-2006 09:13 AM
Folkert Rienstra

Hi all, I am looking for some help with the configuration of my iscsi connection. We have an Infortrend Eonstor iscsi with luns we want to access...

Sylvain YVON

05-08-2006 11:29 AM
Sylvain YVON

This is a PCI-X card. Tyan Tiger has PCI-E x16 slots. I have to call Adaptec back, because 2130SLP is also a PCI-X card. I have no PCI-X slots; ...

jtr

05-07-2006 08:54 AM
Robert Heller

I'm using a Tyan S2882 mobo with an onboard Adaptec 7902 u320 scsi controller, dual 1.8ghz Opteron procs, 4gb ram. The drive is a Seagate...

Frenzy

05-04-2006 11:33 AM
AT

I have an Adaptec 19160 SCSI controller with a SCSI Ultra160 HDD (LVD) and a SCSI CD writer (SCSI-3) I'd like to know if the SCSI controller...

Cyrille Briegel

05-03-2006 02:54 PM
Jeremy Boden

Rob (or anyone else who has experience with these): I have what I thought was an Exabyte 8705 aka Eliant 820. The case and front face plate...

AT

05-03-2006 09:04 AM
Rob Turk

I'm currently shopping for additional external SCSI cables. Due to the current lack of popularity of SCSI devices, SCSI cables are very expensive. ...

Bruce Patis

04-28-2006 10:29 PM
Bruce Patis

I am just getting some quotes from our supplies for some new servers. I am trying to work out the sizes of the drives that will be going...

AT

04-28-2006 03:04 PM
Robert Heller