Hi. I've got 2 external scsi devices. One Compaq Proliant Raid Storage Array, 68-pin wide I believe, and an HP SureStore DAT24 drive,...

chris741@rogers.com

11-26-2005 03:28 AM
Folkert Rienstra

I have a Sony SDT-S9000 (DDS-3) drive. I'm seeking advice on how to solve a mechanical problem. A while ago a tape broke while in the drive. I was...

Jonathan Sachs

11-24-2005 08:20 AM
Jonathan Sachs

I have an Ecrix VXA-1 tape drive. The host computer is running linux. Everything was working fine; I ran a backup and verify (about 3GB) then tried...

Captain Dondo

11-22-2005 11:12 PM
Michael Perry

I had a seagate ST318305LW SCSI disk.I need the firmware for it.who can give it to me? tks.

letit

11-22-2005 08:07 PM
Sunny

I desperately need to obtain a copy of Scsipro demo to test my seagatw 72GB drive. Does anyone know where I can get hold of the demo copy?. I tried...

furrymunkey@gmail.com

11-21-2005 08:57 PM
Lady Margaret Thatcher

I need to buy a new SCSI card as I want to upgrade to XP and can't find a driver for the card in my pc at the moment. RS supply an Adaptec 2904 or a...

kajr@mwfree.net

11-21-2005 07:01 PM
Sunny

Hi All Configuration Controller: Adaptec 2000S SCSI RAID Controller Drives: 2 x 35074Mb drives RAID: ...

GihanZ

11-21-2005 03:19 AM
Folkert Rienstra

Hello I am looking for service workshop manuals for Sony SDT 9000 and Seagate CTD 8000R DDS drives. These are manuals for mechanical overhaul and...

Mike Engles

11-16-2005 05:11 PM
Mike Engles

Hello, I'm having some issues with different tape manufacturers interpreting "remaining space" on a tape drive. Is there a mandate anywhere as to...

Paul Hatcher

11-16-2005 12:32 PM
Rob Turk

We added a new harddrive into the IBM Server x225. Originally, there were 4 physical harddrives; configured as 3 logical drives with RAID5. This new...

skiatsupaibul@gmail.com

11-14-2005 07:47 PM
skiatsupaibul@gmail.com

I am being clobberred by a memory leak which I have traced to my installation of ASPI, version 4.71.2. This leak consumes the nonpaged pool (kernel)...

grant

11-12-2005 09:30 PM
tuatara

I have 2 SCSI U160 18GB LVD drives, Ultra2 WIDE interface cable + hotplug adaptors, and an adaptec Ultra2 pci adaptor capable of 80MB/s per channel. ...

Tiicount

11-12-2005 03:09 PM
Folkert Rienstra

Anyone know the correct setup to use an 68 pin to 80 Pin SCA Adapter? Here's a link to an image of the adapter I'm trying to...

Wildcard

11-12-2005 02:21 PM
Folkert Rienstra

Hi all, I suspect the answer will be obvious, but I don't see it yet. I'm starting to develop a driver for scsi over usb. I've read...

lee_t@bigfoot.com

11-10-2005 10:30 PM
Phil Barila

Hi list. I need as small as possible HD68 Male LVD terminator. Any suggestions on a source ? Sven

Sven

11-10-2005 09:26 AM
Sven

Hello folks, I have a question about firmware upgrading IBM/HITACHI SCSI drives. I have 2 73LZX drives made in 2002 they both make this noise...

plblaze

11-09-2005 12:59 AM
David A.Lethe

ido guys! is possible bypassing write protection by jumper in a scsi hd ? any soft from builder for this ? via inet is possible ? model: seagate...

Biel

11-08-2005 05:48 PM
Folkert Rienstra

I am using Windows XP SP2 and the onboard SCSI it says I have in Device Manager is: Adaptec AHA-2940U/2940UW/2940D PCI SCSI Controller. I bought a...

George Hester

11-08-2005 04:15 PM
George Hester

I am using Windows XP SP2 and the onboard SCSI it says I have in Device Manager is: Adaptec AHA-2940U/2940UW/2940D PCI SCSI Controller. I bought a...

George Hester

11-08-2005 03:25 PM
George Hester

Hi All please excuse the long post, but i believe the more details will assist someone to help me. I am at my wits end with this problem THE...

Headley Sappleton

11-08-2005 02:24 PM
wolfgang schneider

when performing IOCTL_SCSI_GET_INQUIRY_DATA on say \\.\\Scsi0: one of the things you get back is SCSI_ADAPTER_BUS_INFO. one of the fields there...

Martin Vorbrodt

11-07-2005 02:32 PM
Martin Vorbrodt

Hello I am having trouble working out which SCSI card I would need (ie the less cost the better). I have a Seagate Cheetah Ultra320 80 pin SCSI...

Angus Comber

11-04-2005 09:40 AM
Folkert Rienstra

have a ST373407LC seagate SCSI disk and I want to use it in IBM Pseries. I had also downloaded firmware from IBM website: But the firmware is for...

letit

11-04-2005 02:18 AM
letit

I have an old DELL 130T library. The Dell website indicates the latest drivers are only for Win 2k. I'd like to connect it to a newer system (2003...

archive-raider

11-04-2005 01:44 AM
Curious George

Trying to get an old tape library running. It's a Dell 130T which is actually a STK 9730 Timberwolf under the hood. It displays error codes called...

Chris

11-02-2005 07:40 AM
Chris

Hi, I've got a Compaq U2 storage array connected to a Compaw Smart 2/p controller with an assortment of 4.3GB and 9.1GB disks that I use for testing...

Robin Bowes

11-01-2005 10:04 PM
Moojit

Hello, Would anyone have any links which detail the timings and command structures of the SCSI 1 interface? I'm searching high and low on Google at...

techie_alison

10-31-2005 06:13 PM
Folkert Rienstra

Hi All I pulled 2 HP 9.1GB SCSI drives out of an old HP workstation I found. Appears drives were used in a RAID array setup. I basically need the...

Headley Sappleton

10-31-2005 06:11 PM
Folkert Rienstra

I have not been able to find, any info on the U160 largest drive that will operate on the chain. Presently, I have (2)18GB HDs. Christopher

Christopher Range

10-30-2005 05:22 PM
Thomas Scheunemann

as i know, there is difference in performance between inner area and outer area of the disc. can i put the core programs in the inner area by...

tony wong

10-30-2005 09:39 AM
tony wong

Hi Yes I am a newbie to modern SCSI drives I have received 2 SCSI drives which are aprox 36G and 18G. I have plugged each of them into my PCI...

Troy Boy

10-29-2005 05:40 PM
PeterD

We have to retire an end-of-life fiber SAN and replace it with something that costs under $15k. The office is downsizing from about 120 to 60 people...

Jason

10-28-2005 08:09 PM
The Moojit

We've had a large number of HP SCSI drives fail on use. These are drives that have around 2000 hours or less of service on them. So new. Who's...

edavid3001@gmail.com

10-28-2005 09:41 AM
edavid3001@gmail.com

Hi, I have trawled Google Groups for an answer but have not got a definitive one so I am posting this question myself. I have a server with 3 SCSI...

Aynz

10-27-2005 08:19 AM
Folkert Rienstra

I was building up a system and took these two drives out of my "inventory," only to discover neither one could be formatted. Can either of these...

Lady Margaret Thatcher

10-27-2005 02:43 AM
Lady Margaret Thatcher

I'm getting a POST message: "SCSI bios not installed". How to install scsi bios on this server. I can't find appropriate driver for it on IBM...

Sendi.

10-26-2005 07:16 PM
Eric Gisin

I have a home LAN with about 20 GB online. As I get more into digital photography and possibly even videos, I expect that amount of storage can grow...

Lady Margaret Thatcher

10-26-2005 01:18 PM
Curious George

Hi All, Firstly I'll apologise as I have cross posted this question to a couple of other newsgroups as despartion is setting in. My boss has asked...

Steve Brennan

10-26-2005 12:01 PM
Steve Brennan

I have an old Windows 95 system that I keep around for compatibility with some software. The only CD-ROM drive in this system is a Philips CDD 2600...

Greg Berchin

10-26-2005 11:55 AM
Bruce Morgen

I just purchased an Exabyte 8205 SCSI tape drive. It seems to power up correctly, the lights flash in the sequence that the manual says they should....

briang

10-26-2005 09:31 AM
briang

I have a PC running WinXP Pro with SCSI RAID, separate SCSI boot disk and third SCSI card (Adaptec 29160) for an Exabyte Mammoth M2 LVD external...

Alan

10-26-2005 12:27 AM
Alan

I recently got two Dell PowerEdge 4350 (Dual P3 500/512MB PC100/3 Power Supplies) that use the Adaptec AIC-7860 SCSI controller. They were both in...

aberghage@gmail.com

10-25-2005 08:54 AM
PeterD

Hello all, I'm new to SCSI hardware (and I dont know much of the proper terminology). I was wondering if someone could help me out. I've posted...

jwilli

10-24-2005 03:56 PM
Rob Turk

Greetings to all, I am on a border line of engaging in a phisycal contact with 60kg server, but it is simply driving me crazy. The whole thing is...

Bubba

10-24-2005 03:54 PM
Jeff Jonas

Hi I would like to know if it's possible (better?) to mixed two arrays on the two channels. I have 10 disks and I want two create a Raid 5 (8 disks)...

Franck Davids

10-24-2005 05:12 AM
Franck Davids

i have a HP netraid server using scsi-160 9G x 4 hard drive. the capacity is too small now. i wish to change them to larger capacity. Can i change...

tony wong

10-23-2005 05:47 PM
Folkert Rienstra

For other posters who may have been subjected to the k00kery of Rod Speed, a little Googling turned up the "Rod Speed...

Dr. Anton T. Squeegee

10-23-2005 01:38 PM
Dr. Anton T. Squeegee

What is the state of ASPI? Adapted dropped support? Anyone still developing latest/greatest drivers/support? Please advise. Martin

Martin Vorbrodt

10-23-2005 06:56 AM
KOOLER

hello, i just recently purchased a used scsi tape (seagate std28000n) that came with an adaptec aha 2940u/uw adaptor and a 50 pin ribbon. i...

weevil

10-22-2005 09:47 PM
weevil

hi ihave got a asus k8n-e-delux is it possible adaptec 29320a-r will work in this mobo bearing in mind the card is pci-x. im`e getting conflicting...

g7syj

10-21-2005 07:16 PM
g7syj