![]() | |
![]() |
| | Thread Tools | Search this Thread | Display Modes |
#1
| |||
| |||
|
#2
| |||
| |||
|
|
I am certain that it works with same cams. It is mentioned in the manual. Has anybody running a cam in this situation. Gif me some tips if you can ??? |
#3
| |||
| |||
|
|
Clemens.van... (AT) gmail (DOT) com> skrev i meldingnews:1176012565.467184.162010 (AT) q75g2000hsh (DOT) googlegroups.com... I am certain that it works with same cams. It is mentioned in the manual. Has anybody running a cam in this situation. Gif me some tips if you can ??? Hi. I have a DLink DCS-950G wit the latest firmware (1.07). I have tried it with a standalone network harddisk. I set up an account on the harddisk for the camera. Then I logged in to the camera and did this: SETUP - TOOLS - RECORDING. Her I set the camera to stream to the harddisk. Used the same account name and password as I had on the harddisk and gave the path to the account. It worked. Hope this helps. konyberg |
![]() |
| Thread Tools | Search this Thread |
| Display Modes | |
| |